What's new
By:
  • Visit Rebornbuddy
  • Visit Resources
  • Visit API Documentation
  • Visit Downloads
  • Visit Portal
  • Visit Panda Profiles
  • Visit LLamamMagic

[A1 - Inferno] Champion-Hunting

aaron913 said:
I have around 845 All , higher in some.. elite packs are fine like i can stand in arcane things and molten, maybe its not the green pools that's getting me... I'll have to watch it some more (first hour or so with this profile, nice work!)
Click to expand...

They really do hit hard, and yes there is an avoidance option available in .204. My poison resistance is 1095 and they still hurt a fair bit... Anyhow, your avoidance tag is called 'spore' dodging.

Hope this helps.

EDIT: All this bicker about copying someone else's code... What is the need!?! As I was taught when I was learning to code - it's difficult to label someone a plagiarist when efficient and effective code should be written in a particular manner. If you have two really good code writers who know what they're doing, then chances are they are going to write very similar, if not identical, code... Moreover, even if segments of code were extracted from other plugins... The saying always goes, 'it doesn't matter where you take it from, it's where you take it to that counts.' :)
 
Last edited:
heartspains88 said:
You need version 199 go back a few pages it has been discussed
Click to expand...

Or you can edit the 3 waypoints that cause this problem like I did. ;)

I'm at work so I don't have them. I will be home in one hour and I can show you the fix. :o)
 
Last edited:
I owe you an apology. I looked at the code in DBEnhancements, and it is obvious that the similarities that I used as examples were common to that code. I should have researched before I went off the handle, and I'm sorry if I've mislead anyone with my speculation.

I do still believe that Haley and sfj deserve some credit, as theirs was out first and has identical functionality and method as yours, but that's a matter of debate.

Anyway, I'm sorry I jumped the gun and accused you of plagiarism. I've deleted my posts so it doesn't clutter up your thread, but you're welcome to leave your responses if you don't want to let it go.
 
DTrick said:
If you're using Kanes DRelog, which has profiles in start up, you need to do the following:

1: Put #1 Profile in the profile folder in DRelog and link it
2: Put the xml's from the Profile Folder in each of the folders for the Demonbuddy account u loaded in DRelog (DRelog 1.8.6\DRelog\Demonbuddys\bot1) - Otherwise you wont swap profiles. because Kane setup Profile loading weird.

Example: DRelog 1.8.6\DRelog\Demonbuddys\bot1\grayhound1.xml

Rad,
string ppath = Path.GetDirectoryName(lastp);

What happens if the above is listed for profile locations? DRelogger users might need a little fix.

-Edit: Wait i might of found a fix, You put profile into as listed above. (testing now)

-Edit2: Yep its working now, If you use DRelog "Kanes non supported relogger", you must place all your profiles for grayhound in the bots folder that gets created in the main directory with no folder.

Example: DRelog 1.8.6\DRelog\Demonbuddys\bot1\grayhound1.xml
DRelog 1.8.6\DRelog\Demonbuddys\bot1\grayhound2.xml
Click to expand...

Working good now. Thx m8 :)
 
Rakurai said:
I owe you an apology. I looked at the code in DBEnhancements, and it is obvious that the similarities that I used as examples were common to that code. I should have researched before I went off the handle, and I'm sorry if I've mislead anyone with my speculation.

I do still believe that Haley and sfj deserve some credit, as theirs was out first and has identical functionality and method as yours, but that's a matter of debate.

Anyway, I'm sorry I jumped the gun and accused you of plagiarism. I've deleted my posts so it doesn't clutter up your thread, but you're welcome to leave your responses if you don't want to let it go.
Click to expand...
Well i pretty much knew all the time that you havnt looked at superreeens work.
As for giving them credit for the concept, well the concept where made by 5avage LOOONG time ago. Me and 5avage have talked about it months back and as you may have notice, im not use to code in c#, so nothing was done.
I woulnt have made this plugin if i didnt miss some features that profilerestarter doesnt have, for my full act leveling profiles. Such as death handling when you are leveling. When you die, if you are leveling. You can simply go to next zone, and you cant simply just restart the profile. So in the process of getting to the point of a leveling death handling, i got this. As for now its a beta, since it doesnt got what i initially wanted to it have. But it works for the farming profiles that ciggarc releasing on the forums.

Thanks anyway for the apology and im sorry if you felt offended in anyway!
But i must react when i get falsy accused about something. Especially about something i think is really importent in a open community!
 
Radonic said:
Well i pretty much knew all the time that you havnt looked at superreeens work.
As for giving them credit for the concept, well the concept where made by 5avage LOOONG time ago. Me and 5avage have talked about it months back and as you may have notice, im not use to code in c#, so nothing was done.
I woulnt have made this plugin if i didnt miss some features that profilerestarter doesnt have, for my full act leveling profiles. Such as death handling when you are leveling. When you die, if you are leveling. You can simply go to next zone, and you cant simply just restart the profile. So in the process of getting to the point of a leveling death handling, i got this. As for now its a beta, since it doesnt got what i initially wanted to it have. But it works for the farming profiles that ciggarc releasing on the forums.

Thanks anyway for the apology and im sorry if you felt offended in anyway!
But i must react when i get falsy accused about something. Especially about something i think is really importent in a open community!
Click to expand...
Your reaction was totally appropriate, I'd be mad too.

So what happens if your character can't handle a really tough elite pack? For most in Act 1, it's not much of a concern, but I've run across some in Act 2 that no matter how many times I throw myself at them, its not going to happen. Especially if they're a long way into the profile, and they regen completely before I make it back. By looking at yours, it will just infinitely loop, and you could come home from work to a big waste of time.
 
Rakurai said:
Your reaction was totally appropriate, I'd be mad too.

So what happens if your character can't handle a really tough elite pack? For most in Act 1, it's not much of a concern, but I've run across some in Act 2 that no matter how many times I throw myself at them, its not going to happen. Especially if they're a long way into the profile, and they regen completely before I make it back. By looking at yours, it will just infinitely loop, and you could come home from work to a big waste of time.
Click to expand...
Well, in next patch they wont reg xP
And i simply stated that this is working for this profile now. I will in the future develop it to work both with stucks and deaths!
I hope you understand that its still a beta.

Btw it was really big of you to apologize!
 
Bot will TP to town and continue to try and cast TP. The TP animation still plays while in town. Anyone else having this problem?
 
Radonic said:
Well, in next patch they wont reg xP
And i simply stated that this is working for this profile now. I will in the future develop it to work both with stucks and deaths!
I hope you understand that its still a beta.

Btw it was really big of you to apologize!
Click to expand...
Heh, it's not the first time I've gone off on a rant and had to eat my foot. You would think I'd learn.
 
Is it possible to record the name of the mob that kills you? as it lists in chat screen? And say if you die by same mob multi times ssay u get owned by the same boss over and over, it would reset the whole profile? I dont have this problem but was just replying to maybe a solution someone was stating previous posts.
 
DTrick said:
Is it possible to record the name of the mob that kills you? as it lists in chat screen? And say if you die by same mob multi times ssay u get owned by the same boss over and over, it would reset the whole profile? I dont have this problem but was just replying to maybe a solution someone was stating previous posts.
Click to expand...
Yes i will be adding, that you skip to next profile and that you also will remake the game if you die too much or get stuck too much.
But that is in the future!

Edit: but as it is atm, it can be used for A1 without any problem!
 
OK its happening again almost every time here is the attached log for the runs with it not attacking after it leaves CoTA and warriors rest.

i added a Diagnostic log as well. its short i started just that profile.
 

Attachments

Last edited:
Hey Rad any idea when we might see more stable random dungeon stuff? Just wondering if you have any insider info ;)
 
Jackie1234 said:
OK its happening again almost every time here is the attached log for the runs with it not attacking after it leaves CoTA and warriors rest.
Click to expand...
Can see anything is the logs that looks wierd :S Only that you got a massive error in CotA.
From what i see you attack between the dungeons! I dont actually think you have a problem, i think its that you just down understand what im talking about.
Its suppose to stop attack when you walk in and walk out of Rest and CotA! Its designed that way.
If you doesnt attack (which you have) between these dungeons, its either because mobs arnt 13 yards from the center of you character or the you combat routine crashes.
I will now post a bit of code to show you how it works.
Code: 
	<MoveTo questId="1" x="467.8228" y="985.4066" z="20.1" name="Festering Woods #7" pathPrecision="1" /> <---- normal waypoint that the bot walks to outside
	<MoveTo questId="1" x="433.91" y="965.3154" z="20.1" name="Looking for CotA #2" pathPrecision="1" /> <---- The waypoint to make a safe "check" for the dungeon
	<If condition="ActorExistsAt(176008, 428.1892, 878.0865, 16.03252, 15)  and Zeta.ZetaDia.CurrentWorldId==71150"> <---- The check
		<ToggleTargeting questId="1" combat="False" looting="False" lootRadius="70" killRadius="30" /> <---- if the dungeon exist it will turn off combat and looting
		<WaitTimer waitTime="100" />
		<MoveTo questId="1" x="471.5331" y="928.3871" z="20.1" name="In #1" pathPrecision="1" />
		<MoveTo questId="1" x="452.0205" y="918.7938" z="20.23692" name="In #2" pathPrecision="1" />
		<MoveTo questId="1" x="440.5163" y="900.6396" z="16.39473" name="In #3" pathPrecision="1" />
		<MoveTo questId="1" x="438.1875" y="884.9135" z="15.97724" name="In #4" pathPrecision="1" /> <---- 4 waypoints to walk to the dungeon without stucks
		<UseObject questId="1" x="434.8253" y="883.5191" z="15.85076" actorId="176008" isPortal="True" destinationWorldId="60394" /> <---- it will walk into the portal
	</If>
	<If condition="Zeta.ZetaDia.CurrentWorldId==60394">
		<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="70" killRadius="30" /> <---- when its inside it will turn on combat and looting again
		<MoveTo questId="1" x="318.567" y="228.7159" z="-9.290613" pathPrecision="5" />
		<MoveTo questId="1" x="236.7522" y="361.2693" z="-16.84969" pathPrecision="5" />
		<MoveTo questId="1" x="148.5845" y="338.6848" z="-14.60206" pathPrecision="5" />
		<MoveTo questId="1" x="256.621" y="381.7021" z="-17.75699" pathPrecision="5" />
		<MoveTo questId="1" x="298.8536" y="379.7181" z="-37.90237" pathPrecision="5" /> <---- the last waypoint the in CotA
		<While condition="Zeta.ZetaDia.CurrentWorldId==60394">
			<WaitTimer waitTime="100" />
			<MoveTo questId="1" x="236.1708" y="376.3336" z="-15.05489" pathPrecision="1" />
			<MoveTo questId="1" x="297.7783" y="250.1982" z="-10.12247" pathPrecision="1" />
			<MoveTo questId="1" x="285.0051" y="201.6187" z="-6.497152" pathPrecision="1" /> <---- 3 waypoints to walk back to the entrence portal
			<WaitTimer waitTime="1000" />
			<ToggleTargeting questId="1" combat="False" looting="False" lootRadius="70" killRadius="30" /> <---- Turning off combat and looting again
			<UseObject questId="1" x="273.4551" y="184.6861" z="-5.969828" actorId="176008" isPortal="True" destinationWorldId="71150" /> <---- using the portal
			<WaitTimer waitTime="1000" />
			<MoveTo questId="1" x="442.4449" y="907.395" z="17.05136" name="Anti-Stuck" pathPrecision="2"/> <---- worthless old waypoint that i should remove
		</While>
	</If>
	<If condition="ActorExistsAt(176008, 428.1892, 878.0865, 16.03252, 15)  and Zeta.ZetaDia.CurrentWorldId==71150">
		<MoveTo questId="1" x="438.1875" y="884.9135" z="15.97724" name="Out #1" pathPrecision="1" />
		<MoveTo questId="1" x="440.5163" y="900.6396" z="16.39473" name="Out #2" pathPrecision="1" />
		<MoveTo questId="1" x="452.0205" y="918.7938" z="20.23692" name="Out #3" pathPrecision="1" />
		<MoveTo questId="1" x="471.5331" y="928.3871" z="20.1" name="Out #4" pathPrecision="1" />
		<MoveTo questId="1" x="433.91" y="965.3154" z="20.1" name="Out #5" pathPrecision="1" /> <---- 5 waypoint to walk away for the dungeon without stucks
		<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="70" killRadius="30" /> <---- turning on combat and looting once its safe from stucks
	</If>
	<MoveTo questId="1" x="364.1513" y="958.4421" z="20.1" name="Festering Woods #9" pathPrecision="1" /> <---- next normal waypoint

Hope you understand how it all works out now
 
i understand what you say its suppose to do. But whats happening is 2 different things. I have 50 mobs chasing me elites included while running the waypoints and its not attacking htem while Running from way point to waypoint. and it eventually dies. Im not dieing at the door im dieing while running waypoints because the bots not attacking.





ToggleTargeting questId="1" combat="True" looting="True" lootRadius="70" killRadius="30" /> <---- turning on combat and looting once its safe from stucks

the last line isnt happening it walks past the "unsafe" zone where you can get stuck but combat never turns back on it keeps just walking around with out attacking.
 
Last edited:
Jackie1234 said:
i understand what you say its suppose to do. But whats happening is 2 different things. I have 50 mobs chasing me elites included while running the waypoints and its not attacking htem while Running from way point to waypoint. and it eventually dies. Im not dieing at the door im dieing while running waypoints because the bots not attacking.
Click to expand...
Then its not the profile :)

Edit: ask the support for help!
 
Guys, here is the fix for getting stuck right before the Butcher.

Code: 
<!-- Butcher -->
	<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="40" killRadius="30" />
	<If condition="IsActiveQuestStep(36) and (Me.IsInTown)"> 
		<UseWaypoint questId="1" x="2980.667" y="2834.59" z="24.90045" actorId="223757" waypointNumber="14" />
		<WaitTimer questId="1" waitTime="1000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58982">
		<ExploreArea boxTolerance="0.5" boxSize="10" until="ExitFound" exitNameHash="1241437688" />
		<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="87707" />
	</If>
	<MoveTo questId="1" name="Cursed Hold" pathPrecision="10" x="213.6774" y="263.5981" z="-25.15802" />
	<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="94676" x="213.6774" y="263.5981" z="-25.15802" />
	<WaitTimer questId="1" waitTime="3000" /> 
	<If condition="ZetaDia.CurrentWorldId == 94676">
		<MoveTo questId="1" x="242.8607" y="600.8318" z="0.1000001" name="CH #1" pathPrecision="1" />
		<MoveTo questId="1" x="244.4669" y="464.6767" z="0.1" name="CH #2" pathPrecision="1" />
		<MoveTo questId="1" x="244.9081" y="243.9179" z="0.1000001" name="CH #3" pathPrecision="1" />
		<MoveTo questId="1" x="476.0362" y="242.7303" z="0.1" name="CH #4" pathPrecision="1" />
		<MoveTo questId="1" x="477.2295" y="482.4334" z="0.09999988" name="CH #5" pathPrecision="1" />
		<MoveTo questId="1" x="477.802" y="724.2344" z="0.09999996" name="CH #6" pathPrecision="1" />
		<MoveTo questId="1" x="479.0203" y="961.919" z="0.1" name="CH #7" pathPrecision="1" />
		<MoveTo questId="1" x="359.6146" y="963.184" z="0.1" name="CH #8" pathPrecision="1" />
		<MoveTo questId="1" x="242.7725" y="952.6222" z="0.1" name="CH #9" pathPrecision="1" />
		<MoveTo questId="1" x="242.595" y="716.2607" z="0.1000001" name="CH #10" pathPrecision="1" />
		<MoveTo questId="1" x="359.6436" y="712.381" z="0.1000001" name="CH #11" pathPrecision="1" />
		<MoveTo questId="1" x="361.9736" y="601.6431" z="0.1000001" name="CH #12" pathPrecision="1" />
		<MoveTo questId="1" x="515.6844" y="581.8513" z="0.1000001" name="CH #13" pathPrecision="1" />
		<MoveTo questId="1" x="519.7835" y="644.3128" z="0.1000001" name="CH #14" pathPrecision="1" />
		<MoveTo questId="1" x="674.3" y="640.891" z="0.09999999" name="CH #15" pathPrecision="1" />
		[B]<MoveTo questId="1" x="680.195" y="577.9349" z="0.1000001" name="CH #16" pathPrecision="1" />[/B]
		[B]<MoveTo questId="1" x="616.9235" y="580.7195" z="0.1" name="CH #17" pathPrecision="1" />
		<MoveTo questId="1" x="576.1166" y="576.9247" z="-29.00819" name="CH #18" pathPrecision="1" />
		<MoveTo questId="1" x="541.5632" y="580.5383" z="-49.87576" name="CH #19" pathPrecision="1" />[/B]
		<UseObject questId="72801" stepId="36" actorId="175999" isPortal="True" destinationWorldId="58983" x="541.0331" y="583.2349" z="-49.85939" />
		<WaitTimer questId="72801" stepId="36" waitTime="5000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58983">
		<ExploreArea boxTolerance="0.6" boxSize="9" until="ExitFound" exitNameHash="356899046" />
		<UseObject questId="1" actorId="158944" isPortal="True" destinationWorldId="78839" />
		<WaitTimer questId="1" waitTime="2000" />
	</If>
	<If condition="IsActiveQuestStep(7) and ZetaDia.CurrentWorldId == 78839">
		<WaitTimer questId="1" waitTime="1000" />
		<SkipCutscene questId="1" />
		<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="90" killRadius="90" />
		<MoveTo questId="1" pathPrecision="1" x="113.3629" y="163.0687" z="0.100001" name="Cross" />
		<MoveTo questId="1" pathPrecision="1" x="155.3759" y="102.0206" z="0.1000011" name="Cross" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 78839">
		<UseObject questId="72801" stepId="41" actorId="175999" isPortal="True" destinationWorldId="135713" x="40.74231" y="41.23431" z="0.1" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 135713">
		<UseTownPortal questId="1" />
	</If>

The problem is here in the original code:

Code: 
<!-- Butcher -->
	<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="40" killRadius="30" />
	<If condition="IsActiveQuestStep(36) and (Me.IsInTown)"> 
		<UseWaypoint questId="1" x="2980.667" y="2834.59" z="24.90045" actorId="223757" waypointNumber="14" />
		<WaitTimer questId="1" waitTime="1000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58982">
		<ExploreArea boxTolerance="0.5" boxSize="10" until="ExitFound" exitNameHash="1241437688" />
		<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="87707" />
	</If>
	<MoveTo questId="1" name="Cursed Hold" pathPrecision="10" x="213.6774" y="263.5981" z="-25.15802" />
	<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="94676" x="213.6774" y="263.5981" z="-25.15802" />
	<WaitTimer questId="1" waitTime="3000" /> 
	<If condition="ZetaDia.CurrentWorldId == 94676">
		<MoveTo questId="1" x="242.8607" y="600.8318" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="244.4669" y="464.6767" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="244.9081" y="243.9179" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="476.0362" y="242.7303" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="477.2295" y="482.4334" z="0.09999988" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="477.802" y="724.2344" z="0.09999996" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="479.0203" y="961.919" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="359.6146" y="963.184" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="242.7725" y="952.6222" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="242.595" y="716.2607" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="359.6436" y="712.381" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="361.9736" y="601.6431" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="515.6844" y="581.8513" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="519.7835" y="644.3128" z="0.1000001" name="CH #" pathPrecision="1" />
[B]		<MoveTo questId="1" x="674.3" y="640.891" z="0.09999999" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="666.7053" y="581.5468" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="615.6891" y="584.2549" z="0.1000001" name="CH #" pathPrecision="1" />[/B]
		<UseObject questId="72801" stepId="36" actorId="175999" isPortal="True" destinationWorldId="58983" x="541.0331" y="583.2349" z="-49.85939" />
		<WaitTimer questId="72801" stepId="36" waitTime="5000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58983">
		<ExploreArea boxTolerance="0.6" boxSize="9" until="ExitFound" exitNameHash="356899046" />
		<UseObject questId="1" actorId="158944" isPortal="True" destinationWorldId="78839" />
		<WaitTimer questId="1" waitTime="2000" />
	</If>
	<If condition="IsActiveQuestStep(7) and ZetaDia.CurrentWorldId == 78839">
		<WaitTimer questId="1" waitTime="1000" />
		<SkipCutscene questId="1" />
		<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="90" killRadius="90" />
		<MoveTo questId="1" pathPrecision="1" x="113.3629" y="163.0687" z="0.100001" name="Cross" />
		<MoveTo questId="1" pathPrecision="1" x="155.3759" y="102.0206" z="0.1000011" name="Cross" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 78839">
		<UseObject questId="72801" stepId="41" actorId="175999" isPortal="True" destinationWorldId="135713" x="40.74231" y="41.23431" z="0.1" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 135713">
		<UseTownPortal questId="1" />
	</If>

What those 3 bolded lines do is take you to the top of the stairs and then it will wrap back around and try to enter from the top of the stairs.

I added 4 lines of code to ensure that you stop right before the doorway (CH #16), walk through the doorway (CH #17), to the middle of the stairs (CH #18) and then right to the portal (CH #19). You can verify the change in elevation down the stairs because the z coordinates become increasingly negative.

I'm posting it here and giving you the new .xml file.

All code is owner of Radonic and he gets the props for making this.

Oh, Radonic - I also added the CH #s because for some reason they were not filled out.
 

Attachments

Flyingtoo said:
Guys, here is the fix for getting stuck right before the Butcher.

Code: 
<!-- Butcher -->
	<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="40" killRadius="30" />
	<If condition="IsActiveQuestStep(36) and (Me.IsInTown)"> 
		<UseWaypoint questId="1" x="2980.667" y="2834.59" z="24.90045" actorId="223757" waypointNumber="14" />
		<WaitTimer questId="1" waitTime="1000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58982">
		<ExploreArea boxTolerance="0.5" boxSize="10" until="ExitFound" exitNameHash="1241437688" />
		<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="87707" />
	</If>
	<MoveTo questId="1" name="Cursed Hold" pathPrecision="10" x="213.6774" y="263.5981" z="-25.15802" />
	<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="94676" x="213.6774" y="263.5981" z="-25.15802" />
	<WaitTimer questId="1" waitTime="3000" /> 
	<If condition="ZetaDia.CurrentWorldId == 94676">
		<MoveTo questId="1" x="242.8607" y="600.8318" z="0.1000001" name="CH #1" pathPrecision="1" />
		<MoveTo questId="1" x="244.4669" y="464.6767" z="0.1" name="CH #2" pathPrecision="1" />
		<MoveTo questId="1" x="244.9081" y="243.9179" z="0.1000001" name="CH #3" pathPrecision="1" />
		<MoveTo questId="1" x="476.0362" y="242.7303" z="0.1" name="CH #4" pathPrecision="1" />
		<MoveTo questId="1" x="477.2295" y="482.4334" z="0.09999988" name="CH #5" pathPrecision="1" />
		<MoveTo questId="1" x="477.802" y="724.2344" z="0.09999996" name="CH #6" pathPrecision="1" />
		<MoveTo questId="1" x="479.0203" y="961.919" z="0.1" name="CH #7" pathPrecision="1" />
		<MoveTo questId="1" x="359.6146" y="963.184" z="0.1" name="CH #8" pathPrecision="1" />
		<MoveTo questId="1" x="242.7725" y="952.6222" z="0.1" name="CH #9" pathPrecision="1" />
		<MoveTo questId="1" x="242.595" y="716.2607" z="0.1000001" name="CH #10" pathPrecision="1" />
		<MoveTo questId="1" x="359.6436" y="712.381" z="0.1000001" name="CH #11" pathPrecision="1" />
		<MoveTo questId="1" x="361.9736" y="601.6431" z="0.1000001" name="CH #12" pathPrecision="1" />
		<MoveTo questId="1" x="515.6844" y="581.8513" z="0.1000001" name="CH #13" pathPrecision="1" />
		<MoveTo questId="1" x="519.7835" y="644.3128" z="0.1000001" name="CH #14" pathPrecision="1" />
		<MoveTo questId="1" x="674.3" y="640.891" z="0.09999999" name="CH #15" pathPrecision="1" />
		[B]<MoveTo questId="1" x="680.195" y="577.9349" z="0.1000001" name="CH #16" pathPrecision="1" />[/B]
		[B]<MoveTo questId="1" x="616.9235" y="580.7195" z="0.1" name="CH #17" pathPrecision="1" />
		<MoveTo questId="1" x="576.1166" y="576.9247" z="-29.00819" name="CH #18" pathPrecision="1" />
		<MoveTo questId="1" x="541.5632" y="580.5383" z="-49.87576" name="CH #19" pathPrecision="1" />[/B]
		<UseObject questId="72801" stepId="36" actorId="175999" isPortal="True" destinationWorldId="58983" x="541.0331" y="583.2349" z="-49.85939" />
		<WaitTimer questId="72801" stepId="36" waitTime="5000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58983">
		<ExploreArea boxTolerance="0.6" boxSize="9" until="ExitFound" exitNameHash="356899046" />
		<UseObject questId="1" actorId="158944" isPortal="True" destinationWorldId="78839" />
		<WaitTimer questId="1" waitTime="2000" />
	</If>
	<If condition="IsActiveQuestStep(7) and ZetaDia.CurrentWorldId == 78839">
		<WaitTimer questId="1" waitTime="1000" />
		<SkipCutscene questId="1" />
		<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="90" killRadius="90" />
		<MoveTo questId="1" pathPrecision="1" x="113.3629" y="163.0687" z="0.100001" name="Cross" />
		<MoveTo questId="1" pathPrecision="1" x="155.3759" y="102.0206" z="0.1000011" name="Cross" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 78839">
		<UseObject questId="72801" stepId="41" actorId="175999" isPortal="True" destinationWorldId="135713" x="40.74231" y="41.23431" z="0.1" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 135713">
		<UseTownPortal questId="1" />
	</If>

The problem is here in the original code:

Code: 
<!-- Butcher -->
	<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="40" killRadius="30" />
	<If condition="IsActiveQuestStep(36) and (Me.IsInTown)"> 
		<UseWaypoint questId="1" x="2980.667" y="2834.59" z="24.90045" actorId="223757" waypointNumber="14" />
		<WaitTimer questId="1" waitTime="1000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58982">
		<ExploreArea boxTolerance="0.5" boxSize="10" until="ExitFound" exitNameHash="1241437688" />
		<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="87707" />
	</If>
	<MoveTo questId="1" name="Cursed Hold" pathPrecision="10" x="213.6774" y="263.5981" z="-25.15802" />
	<UseObject questId="1" actorId="176001" isPortal="True" destinationWorldId="94676" x="213.6774" y="263.5981" z="-25.15802" />
	<WaitTimer questId="1" waitTime="3000" /> 
	<If condition="ZetaDia.CurrentWorldId == 94676">
		<MoveTo questId="1" x="242.8607" y="600.8318" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="244.4669" y="464.6767" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="244.9081" y="243.9179" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="476.0362" y="242.7303" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="477.2295" y="482.4334" z="0.09999988" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="477.802" y="724.2344" z="0.09999996" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="479.0203" y="961.919" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="359.6146" y="963.184" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="242.7725" y="952.6222" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="242.595" y="716.2607" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="359.6436" y="712.381" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="361.9736" y="601.6431" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="515.6844" y="581.8513" z="0.1000001" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="519.7835" y="644.3128" z="0.1000001" name="CH #" pathPrecision="1" />
[B]		<MoveTo questId="1" x="674.3" y="640.891" z="0.09999999" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="666.7053" y="581.5468" z="0.1" name="CH #" pathPrecision="1" />
		<MoveTo questId="1" x="615.6891" y="584.2549" z="0.1000001" name="CH #" pathPrecision="1" />[/B]
		<UseObject questId="72801" stepId="36" actorId="175999" isPortal="True" destinationWorldId="58983" x="541.0331" y="583.2349" z="-49.85939" />
		<WaitTimer questId="72801" stepId="36" waitTime="5000" /> 
	</If>
	<If condition="IsActiveQuestStep(36) and ZetaDia.CurrentWorldId == 58983">
		<ExploreArea boxTolerance="0.6" boxSize="9" until="ExitFound" exitNameHash="356899046" />
		<UseObject questId="1" actorId="158944" isPortal="True" destinationWorldId="78839" />
		<WaitTimer questId="1" waitTime="2000" />
	</If>
	<If condition="IsActiveQuestStep(7) and ZetaDia.CurrentWorldId == 78839">
		<WaitTimer questId="1" waitTime="1000" />
		<SkipCutscene questId="1" />
		<ToggleTargeting questId="1" combat="True" looting="True" lootRadius="90" killRadius="90" />
		<MoveTo questId="1" pathPrecision="1" x="113.3629" y="163.0687" z="0.100001" name="Cross" />
		<MoveTo questId="1" pathPrecision="1" x="155.3759" y="102.0206" z="0.1000011" name="Cross" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 78839">
		<UseObject questId="72801" stepId="41" actorId="175999" isPortal="True" destinationWorldId="135713" x="40.74231" y="41.23431" z="0.1" />
	</If>
	<If condition="IsActiveQuestStep(41) and ZetaDia.CurrentWorldId == 135713">
		<UseTownPortal questId="1" />
	</If>

What those 3 bolded lines do is take you to the top of the stairs and then it will wrap back around and try to enter from the top of the stairs.

I added 4 lines of code to ensure that you stop right before the doorway (CH #16), walk through the doorway (CH #17), to the middle of the stairs (CH #18) and then right to the portal (CH #19). You can verify the change in elevation down the stairs because the z coordinates gets negative.

I'm posting it here and giving you the new .xml file.

All code is owner of Radonic and he gets the props for making this.

Oh, Radonic - I also added the CH #s because for some reason they were not filled out.
Click to expand...
The problem is still that it doesnt wanna walk down to butcher xP

Edit: Thanks anyway :D Glad you wanna help!
 
You must log in or register to reply here.
Back
Top