[A1]-[A4] Keywarden Profile

[zagaprt]

Hey guys, everytime i try to load this profile the game crash. Any clue what the problem is???

 

[zagaprt]

Hey guys, everytime i try to load this profile act1 act3 start here or act1 act3 reloggers start here, he creates the game and go stash, leave game and create another and crash!! Any clue what the problem is??? I think i have all quests done. When i choose act4 he make act4 and act3

 

[DBUser32478]

Hey guys, everytime i try to load this profile act1 act3 start here or act1 act3 reloggers start here, he creates the game and go stash, leave game and create another and crash!! Any clue what the problem is??? I think i have all quests done. When i choose act4 he make act4 and act3

possibly the need to complete all quest for campaign mode? thats what my problem was

Also I have 2 crashes in 12 hrs that didn't allow restart. I am unsure why... but my key count was 12 hrs ago
52
37
7
102

since running this for 12 hrs non stop besides 2 crashes where im unsure how long it ran or didnt run.... my count is now
52
38
25 - it checks stash when you start sees lowest total and only runs that act.
102

IF NOT for 2 crashes i could be at 38 act 3 too and then i'd be running act 2 and 3 until 52....

not to bad

 

[EnternalEnvy]

could someone re-do this profile so that it can run in adventure mode instead? by doing that it will save a lot of time, logging in or out, and for people who don't have access to specific campaign quest greatly appreciated

 

[DBUser32478]

I don't think logging in and out seems to be a problem, I'm at 50 Keys act 1-3 already and its been 24 hrs or so. it takes less than an hour on T1 and probably 30 min on Normal to run from Quest 1 act 1 to A2. Any class can get 25 MS and fly through each act get all the quest done and start running.

thanks for your work and there haven't been anymore crashes so far.

 

[zagaprt]

Actualy i got all quest done ; He create game go stash and leave it, then he make another game and after he crash instantly

Demonbuddy v1.1.1923.363 started
Logging in...
T: 5247085933412686193 H: 134297220
Attached to Diablo III with pid: 2792
Flashing window
[Trinity] Initialized v1.9.8
[Trinity] OnEnable start
Setting up Trinity Logging
[Trinity] Loading BattleTag Settings
[Trinity] Configuration file loaded
[Trinity] ENABLED: Trinity v1.9.8 now in action!
Current bot set to Order Bot
Loaded profile Rift Bot Act 4 Bounties
[Plugin] v2.0.85 Enabled
[Plugin] v2.0.85 Disabled
[KeyRun] ************************************
[KeyRun] ENABLED: KeyRun 1.9.1 now in action!
[KeyRun] ************************************
[KeyRun] Profile changed, let's assume it's not a KeyRun profile ...
Loaded profile [A1 - A4] Keyhunting - Choose an Act
Chose Trinity as your combat routine
[KeyRun] Profile changed, let's assume it's not a KeyRun profile ...
Loaded profile [A1 - A4] Keyhunting - Choose an Act
Chose Trinity as your combat routine
[Trinity] Bot Starting
[Trinity] Replacing Combat Hook
[Trinity] Replacing VendorRun Hook
[Trinity] Replacing Loot Hook
[Trinity] Inserting GoldInactivity into BotBehavior
[Trinity] Bot Starting, Resetting Gold Inactivity Timer
Waiting 12 seconds before next game...
Creating new game. Params: [Act: A1, Difficulty: Torment5, Quest: 72801, QuestStep: 36, ResumeFromSave: False, IsPrivate: True]
[KeyRun] Profile changed, let's assume it's not a KeyRun profile ...
Loaded profile [A1 - A4] Keyhunting - Choose an Act
[KeyRun] New Game Started, Reset Variables
GameChanged. Clearing actors
[Trinity] New Game - resetting everything
[Trinity] New Game, resetting Gold Inactivity Timer
[Trinity] New Game - resetting everything
ProfileOrderManager.OnGameJoined, Reloading profile.
[Trinity] New Game, resetting Gold Inactivity Timer
[KeyRun] Profile changed, let's assume it's not a KeyRun profile ...
Loaded profile [A1 - A4] Keyhunting - Choose an Act
Game joined, Resetting profile caches.
[Trinity] Starting up Generic Cache Manage thread
[Trinity] Starting up Generic Blacklist Manager thread
Interacting with object Player_Shared_Stash-11
[KeyRun] Key Counts: Act 1 => 17, Act 2 => 17, Act 3 => 17, Act 4 => 47
[KeyRun] Loading act 1
[KeyRun] Loading new profile.
[KeyRun] F:\D3 Bot\Demonbuddy 1.1.1923.363-1\Profiles\KeyHunt\act1_start.xml
[KeyRun] Profile changed, let's assume it's not a KeyRun profile ...
Loaded profile [A1] Keywarden Hunt - Profile Starter!
[KeyRun] Exiting game to continue with next profile.
Waiting 5.8 seconds before next game...
Creating new game. Params: [Act: A1, Difficulty: Torment5, Quest: 72801, QuestStep: 36, ResumeFromSave: False, IsPrivate: True]
[KeyRun] Profile changed, let's assume it's not a KeyRun profile ...
Loaded profile [A1] Keywarden Hunt - Profile Starter!
Game joined, Resetting profile caches.
ToggleTargeting, new values: Looting:True LootRadius:80 Combat:True KillRadius:35
[Trinity][Performance] Execution of UpdateCachedPlayerData took 15001.74ms.
[Trinity][Performance] Execution of RefreshDiaObjectCache.UpdateBlock took 15004.32ms.
[Trinity][Performance] Execution of RefreshDiaObjectCache took 15005.12ms.
[Trinity][Performance] Execution of TargetCheck.RefreshCache took 15005.67ms.
[Trinity][Performance] Execution of TargetCheck took 15018.49ms.
[Trinity][Performance] Execution of TownRunOverlord took 15000.19ms.
[Trinity] Error Getting TownRun Process must have frozen or gotten out of sync: InjectionFinishedEvent_was_never_fired
Exception during bot tick.System.Exception: Process must have frozen or gotten out of sync: InjectionFinishedEvent_was_never_fired
em GreyMagic.Executor.WaitForInjection(Int32 timeout)
em GreyMagic.Executor.Execute(Int32 timeout)
em GreyMagic.Executor.GrabFrame()
em GreyMagic.ExternalProcessMemory.AcquireFrame(Boolean isHardLock)
em Zeta.Bot.BotMain.
()

Exception during bot tick.System.Exception: Process must have frozen or gotten out of sync: InjectionFinishedEvent_was_never_fired
em GreyMagic.Executor.WaitForInjection(Int32 timeout)
em GreyMagic.Executor.Execute(Int32 timeout)
em GreyMagic.Executor.GrabFrame()
em GreyMagic.ExternalProcessMemory.AcquireFrame(Boolean isHardLock)
em Zeta.Bot.BotMain.
()

Exception during bot tick.System.Exception: Process must have frozen or gotten out of sync: InjectionFinishedEvent_was_never_fired
em GreyMagic.Executor.WaitForInjection(Int32 timeout)
em GreyMagic.Executor.Execute(Int32 timeout)
em GreyMagic.Executor.GrabFrame()
em GreyMagic.ExternalProcessMemory.AcquireFrame(Boolean isHardLock)
em Zeta.Bot.BotMain.
()

Thx in advance Hugs

 

[Kronz]

What's the difference between the two attachments ?

KeyRun_Toky_0.1.zip
KeyRun_Toky_Alpha.zip

 

[brebs]

I cant even run the bot, just comes up with error 316631 when it tries to create the game ????????????

 

[Morgenstein]

I cant even run the bot, just comes up with error 316631 when it tries to create the game ????????????

You do not have the specific quest, that is why you are getting the 316631 error. Best to just get the all rrrix Level/Questing Pack and run that to complete the entire game... Then go back and start up the keyfarming script.

As for the "Creates game, checks stash then loads a profile - starts next game and crashes at the start" I too have this problem. It did not happen all of yesterday but now it's going on every time I start it. Rather annoying as I have tried two different computers, re-installed DB beta and release and have the same issues...

Ugg...

 

[brebs]

thanks for that

 

[brebs]

in all seriousness though... its good to have that option to avoid combat while looking for the keywardens.. but to the point where if ur char is surrounded he just stands there and dies....

 

[Morgenstein]

in all seriousness though... its good to have that option to avoid combat while looking for the keywardens.. but to the point where if ur char is surrounded he just stands there and dies....

Run Bounties and get the boots that allow you to run thru mobs. Problem Solved.

 

[brebs]

lol touche... ahah

 

[DBUser32478]

This is an AWESOME Profile!!! Maybe the best one I have used since I made my purchase here!!!!

Not ONLY does is find the KW majority of the time, but it checks for the key that I have the least of and looks for that key until it finds it then goes to the next so I dont have 12 of one key and 60 of another.

I have over 100 of each key now and have only been doing this a few days. (check for my first post here)

If you're running around in T6 Act 2 and 3 seems to be the hardest KWs for me to kill, but I rarely die and If I can't kill trash mobs you can bet I cant kill the KW. Yes WDs can avoid some combat and with trash mobs set to 15 I avoid 95% of it but elites and trash mobs better not be an issue for you to kill or you will never kill the KW either.

thanks for your hard work here.

If you havent done Ubers yet.... Be ready for a Tough Fight. The Old three Ubers are easy and on T6 it takes me 1-2 mins per to kill. But the Fourth one or New Uber post 2.0 is extremely hard for me on T6.
If you are on JSP I have a friend who is doing free carry service with your keys and he's a Furnace wielding Sader that melts Ubers in 30 secs and has zero issues with killing anything. You can contact me there if you like for assistance with Ubers Randz66@JSP

 

[Morgenstein]

Here is the error when we get the game freeze after starting the profile... It starts, then checks the inventory and loads the run for which key to get... when the next game starts the game actually freezes and this is popped in the logs ---

17:21:33.960 DEBUG GridSegmentation ========== Grid segmentation resetting!!! ============
17:21:33.961 DEBUG GameEvents [BotEvents] EventChecker
threw exception Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 00000020, Size: 4 in check
17:21:33.961 DEBUG BrainBehavior Exception during scheduling Pulse: System.Exception: Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 0000005C, Size: 4
at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count)
at GreyMagic.MemoryBase.Read[T](IntPtr addr)
at Zeta.Game.Internals.FastAttribGroupsEntry.GetAttribute[T](Int32 attribute)
at Zeta.Game.Internals.Actors.ACD.GetAttribute[T](Int32 attribute)
at Zeta.Game.Internals.Actors.ACD.GetAttribute[T](ActorAttributeType attributeType)
at Zeta.Game.Internals.Actors.DiaActivePlayer.get_NumBackpackSlots()
at Zeta.Game.Internals.Actors.DiaActivePlayer.InventoryManager.get_NumFreeBackpackSlots()
at Zeta.Bot.Logic.BrainBehavior.
()
at Zeta.Bot.Logic.BrainBehavior.()

 

[Arathane]

I dont get it.. It still doesnt pick up keys. I have set the loot waiting timer longer, like adviced, but it keeps just walking passed the keys without picking them up. I checked the triniry rules, and pick up keys is checked.. anyone knwo how this is possible?

Im having this same problem, funny thing is, it doesnt happen all of the time. I had the bot running for a few hours and it picked up 1 act 1 key and 2 act 4 keys. i sat and watched it do act 2 and 3 and it just walked past the keys when they dropped, the act 3 warden even dropped 2 keys! The bot just tried to TP and leave, without picking up the keys! lucky i paused the bot in time and went back for them manually.....

Any advice to stop this behavior?

Edit: Just watched it do act 2 again and same thing, warden dropped a key and the bot ignored it.

 

[snakkes]

This is an AWESOME Profile!!! Maybe the best one I have used since I made my purchase here!!!!

Not ONLY does is find the KW majority of the time, but it checks for the key that I have the least of and looks for that key until it finds it then goes to the next so I dont have 12 of one key and 60 of another.

I have over 100 of each key now and have only been doing this a few days. (check for my first post here)

If you're running around in T6 Act 2 and 3 seems to be the hardest KWs for me to kill, but I rarely die and If I can't kill trash mobs you can bet I cant kill the KW. Yes WDs can avoid some combat and with trash mobs set to 15 I avoid 95% of it but elites and trash mobs better not be an issue for you to kill or you will never kill the KW either.

thanks for your hard work here.

If you havent done Ubers yet.... Be ready for a Tough Fight. The Old three Ubers are easy and on T6 it takes me 1-2 mins per to kill. But the Fourth one or New Uber post 2.0 is extremely hard for me on T6.
If you are on JSP I have a friend who is doing free carry service with your keys and he's a Furnace wielding Sader that melts Ubers in 30 secs and has zero issues with killing anything. You can contact me there if you like for assistance with Ubers Randz66@JSP

You used the version in the first post?

 

[DBUser32478]

You used the version in the first post?

Yes,

Attached Files Attached Files
File Type: zip KeyRun_Toky_0.1.zip (27.9 KB, 25135 views)
File Type: zip KeyRun_Toky_Alpha.zip (27.6 KB, 4785 views)



i DL them both because I wasnt sure which one to run and followed the instructions... Easy! Very AFKable
I am NOT a computer guy and I dont know code or C++ or whatever it is.... I am computer illiterate and had no issue following the steps provided.
there are a few times the game crashes and doesnt restart but I have had several nights now it ran 6-8 hrs and I woke up to 10+ keys of act 1-3 each.
Running on T6 with a Pet Doc

**Something to note
there are instructions for installing trinity and other tools and this is run on campaign mode Not adventure so I think this is the one I had to use my Doc that completed ALL Quests.

 

[snakkes]

For me it doesnt work at all.

It fucks up on act 4 game creating even tho I have all quests? :S

 

[S o u L D u s T]

would it be possible to run this in adventure mode instead of regular maps?