What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[A - Quest] Borean 68-7x [Kick] - ?eta

new build up, should address the grindto to issue

added elevator for turning gearmaster quest
 
Last edited:
had some troubles with the quest in coldara where you break the eggs..
got 5 axes.. broke one egg then just returned and tried to complete the quest..
well i stopped there coz it;ll never complete it.. completed it.. restart -> bot when buggers
anyway. i hit 73 with this profile (BOA equipped with fully rested exp)
i think i'll just move onto your dragonblight one..
i WAS going to use your grizzly hills but found out it now starts with (grindto 76 :O )
cheers mate :D
 
Fresh install of HB 3895 and still getting the stop after picking up Enemies of the light. it's giving me the same errors as in my previous post. I can't imagine what I'm doing differently to be the only one getting this problem?
 
nokdu said:
had some troubles with the quest in coldara where you break the eggs..
got 5 axes.. broke one egg then just returned and tried to complete the quest..
well i stopped there coz it;ll never complete it.. completed it.. restart -> bot when buggers
anyway. i hit 73 with this profile (BOA equipped with fully rested exp)
i think i'll just move onto your dragonblight one..
i WAS going to use your grizzly hills but found out it now starts with (grindto 76 :O )
cheers mate :D
Click to expand...
lol sorry, i was using a level 75 to do dragonblight xD i'll fix it
for the eggs, i'll look into what's wrong with that. It worked fine when I did it

saeldadar said:
Fresh install of HB 3895 and still getting the stop after picking up Enemies of the light. it's giving me the same errors as in my previous post. I can't imagine what I'm doing differently to be the only one getting this problem?
Click to expand...
Errors:
error CS0006: Metadata file 'Tripper.Tools.dll' could not be found
Honorbuddy stopped

uh, something is wrong with your HB, or .net 3.5 sp1 isn't installed / configured correctly. :\ check out the support section
 
Last edited:
Yeah I looked it up, and did what was suggested in another thread. It's been progressing along just fine. On the "Take No Chances" quest, it kept trying to turn it in with 7/8 bales of hay burned. I don't know if this is a one time bug for me or if it's something in the code, but I was hoping you could check on it. I'll keep going with it and report back.
 
Actually I got it fixed by looking at a previous post of his. It's amazing how obvious an error is when you actually LOOK at the log and see what it says is the problem lol. I replaced the tripper.tools.dll and it continued after Enemies of the Light just fine :)

One thing I've noticed is that for quests that require being underwater, 2 of which I've done so far: "The Emissary" and "In Wine, Truth", after it eventually completes the quest objective, the inevitable result is drowning. Is this a profile thing or an HB thing?

EDIT: And of course after asking I do a TINY bit of research and see an anti-drowning plug-in on the board. I suppose that would have helped. Though it's from...July so I don't think its working atm.

ok it wouldn't resume after killing Leviroth for "The Emissary" quest. It's stuck on:

[10:57:05 AM:483] Goal: Picking up The Emissary
[10:57:05 AM:874] Goal: Goal: Move to <1543.178, 5705.408, 1.219794>

It just wont go turn it in. I abandoned the emissary quest, and then restarted it and it headed back to pick up "Enlistment Day" which is the first Borean quest. I guess it was going through the whole check, but I went afk, and when I came back, WoW had crashed. In the glider log though, I did notice that the anti-drown plugin was working as it said going up for air.

Though now, I'm stuck waiting for it to go turn in the emissary and continue questing. Any ideas?
 
Last edited:
I manually turned in "The Emissary" and it moved to the next step "Reclaiming the Quarry"
 
yeah a couple of "special" things that I did with the borean one was using myCTM - but it currently requires a questId, I have KaZ working on making the QuestId optional so that we can get around these stupid water errors :(
 
I saw you refer to myCTM alot during your original post...what is it exactly? :o
 
saeldadar said:
I saw you refer to myCTM alot during your original post...what is it exactly? :o
Click to expand...

myCTM basically ignores navmesh and tells the bot to "point and click here" and it goes there like GB navigation... but then you also may get stuck on something and the bot can't help you ;) so that's why I don't use it much.

It's basically to do some of the water quests
 
Thanks for your hard work!

For the quest In Wine, Trust like stated before it does the quest but then dies, after manually rezzing it just stood there, so I manually tuned it in, now it constantly tries to accept the quest after it has already been completed and turned in, is there a way passed this?
 
nfantry said:
Thanks for your hard work!

For the quest In Wine, Trust like stated before it does the quest but then dies, after manually rezzing it just stood there, so I manually tuned it in, now it constantly tries to accept the quest after it has already been completed and turned in, is there a way passed this?
Click to expand...

stop, reload profile, click start. sometimes the bot gets confuzzled if you stop / start a lot.

and i'll work on that wine quest thing, the CTM should work unless you went around doing quests manually
 
finally fixed this quest correctly:
Death From Above

PHP: 
			<If Condition="((HasQuest(11889)) &amp;&amp; (!IsQuestCompleted(11889)))" >
				<CustomBehavior File="UseItemAtRange" QuestId="11889" ObjectType="Npc" MobId="25582" ItemId="35278" NumOfTimes="50" WaitTime="1000" RangeWanted="30" CollectionDistance="100" X="2193.77" Y="5396.746" Z="0.1646834" />
			</If>
			<Objective QuestName="Death From Above" QuestId="11889" Type="KillMob" MobId="25582" MobName="Scourged Flamespitter" KillCount="6" />

Ty KaZ for a working CB!

Notes:

I also fixed the wine quest ... I change myCTM to BasicMovement CB
 
it looks like when I was going through and messing around with this, I commented out quest 12035 - I have uncommented it so that myCTM works :p

my bad
 
Been using this a bit today and it's been good so far but it got stuck at the point for collecting 5 winterfin clams, it just sat there and did nothing so I manually collected them so it could continue on.
 
drocks said:
Been using this a bit today and it's been good so far but it got stuck at the point for collecting 5 winterfin clams, it just sat there and did nothing so I manually collected them so it could continue on.
Click to expand...
same probem: when it has to cross water for some reason it just can't in the debug it says : cannot generate full path blabla
 
drocks said:
Been using this a bit today and it's been good so far but it got stuck at the point for collecting 5 winterfin clams, it just sat there and did nothing so I manually collected them so it could continue on.
Click to expand...

iesux said:
same probem: when it has to cross water for some reason it just can't in the debug it says : cannot generate full path blabla
Click to expand...

PHP: 
		<PickUp QuestName="Winterfin Commerce" QuestId="11559" GiverName="King Mrgl-Mrgl" GiverId="25197" GiverType="NPC" />
			<!-- looting these from ground doesn't work with collectitem
			<Objective QuestName="Winterfin Commerce" QuestId="11559" Type="CollectItem" CollectCount="5" ItemId="34597" />
			-->
			<If Condition="((HasQuest(11559)) &amp;&amp; (!IsQuestCompleted(11559)))" >
				<CustomBehavior File="MyCTM" QuestId="11559" Location="4266.167 6233.443 -0.06203166" />
				<CustomBehavior File="InteractWith" QuestId="11559" ObjectType="Gameobject" MobId="187367" NumOfTimes="8" CollectionDistance="500" X="4266.167" Y="6233.443" Z="-0.06203166" />
			</If>
		<TurnIn QuestName="Winterfin Commerce" QuestId="11559" TurnInName="Ahlurglgr" TurnInId="25206" />

Added a myCTM (note: if you restart while on this quest, you'll go there)
 
Last edited:
Quest "Hatching a Plan" fixed, make sure you use the new CB InteractWith5 (5 seconds interacttime)
 
You must log in or register to reply here.
Back
Top