What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

2.5 GR75+ Speedrun Manald Archon Guide

R

raven105x

New Member
Joined
Feb 15, 2016
Messages
20
Reaction score
3
UPDATE: Attached Trinity 2.250.750 BETA. Now Running GR82-85s without Dying.

(1) Fix instructions to run DemonBuddy without it crashing itself or D3.

a. Download "Demonbuddy 1.1.3154.482.zip" (find it on these forums)
b. Download "Trinity 2.250.750 BETA.zip" (find it on these forums)
c. Extract "Demonbuddy 1.1.3154.482.zip" into a folder of your choice.
d. Go to the "Plugins" directory in DB and delete the "Trinity" folder.
e. Extract "Trinity 2.250.750 BETA.zip" to where you just deleted "Trinity".

(2) Modifications to DemonBuddy to fix custom profile execution

a. Download "RoutineManager.txt" (attached to this post)
b. Rename it to "RoutineManager.cs"
c. Use it to overwrite the one in "Plugins\Trinity\Framework"

(3) Modifications to TwoCigar's archon profile, which this is based on.

a. Download "WizardVyRashaManaldArchon.txt" (attached to this post)
b. Rename it to "WizardVyRashaManaldArchon.cs"
c. Use it to overwrite the one in "Plugins\Trinity\Routines\Wizard"

(4) Demonbuddy startup Instructions.
a. Log into game, into your character, start DB, put in your key
b. Go to Plugins, Trinity and press "Config"
c. Under the Routine Tab, select "Force Specific Routine"
d. Choose "VyRasha Manald Archon GR Build by TwoCigars"
e. Set Archon and Non-Archon Cluster Sizes to 2/5 respectively.
f. Set Health and AP Emergency Transform to 0/1 (Lowest)
g. Choose your desired GR difficuly, import item lists, etc.

Note: DB will only run from a FRESH install. You'll have to re-setup each time you want to run it.

I don't know why this is, nor do I have the time to debug it, just remember to do this.

(5) Gear, talents, stat priority, results.

Link to Gear Build

Make sure you cube Manald Heal instead if it's under 13,800% weapon damage.
Also, cube the least perfect between Swami/Fazula. 1:3 priority ratio from 100%.
Talents are same as the link, but replace Teleport with Black Hole / Spellsteal.

Stat Priorities:

(1) CDR on everything, you need at least 62% with the talent.
(2) Attack Speed until you have AT LEAST 1.6 per second
Once you hit 2.07 unbuffed, go for CHD/CHC instead.

Once you have all the right pieces, start farming 45-50s.
Once you also have full CDR, you should be at least 55.
Once you have good attack speed and optimize, 60-65.
All three of your gems being 65+ should get you 65-70.
After that, full 65+ Augments will get you to GR70-75.

Hope you enjoy.
 

Attachments

Last edited:
Awsome work dude , i run 65gr for now can i ask you to share your itemlist if you have one ? hard for make one perfect :/

thanks again !
 
raven105x said:
(1) Fix instructions to run DemonBuddy without it crashing itself or D3.

a. Download "Demonbuddy 1.1.3154.482.zip" (find it on these forums)
b. Download "Trinity 2.250.750 BETA.zip" (find it on these forums)
c. Extract "Demonbuddy 1.1.3154.482.zip" into a folder of your choice.
d. Go to the "Plugins" directory in DB and delete the "Trinity" folder.
e. Extract "Trinity 2.250.750 BETA.zip" to where you just deleted "Trinity".

(2) Modifications to DemonBuddy to fix custom profile execution

a. Download "RoutineManager.txt" (attached to this post)
b. Rename it to "RoutineManager.cs"
c. Use it to overwrite the one in "Plugins\Trinity\Framework"

(3) Modifications to TwoCigar's archon profile, which this is based on.

a. Download "WizardVyRashaManaldArchon.txt" (attached to this post)
b. Rename it to "WizardVyRashaManaldArchon.cs"
c. Use it to overwrite the one in "Plugins\Trinity\Routines\Wizard"

(4) Demonbuddy startup Instructions.
a. Log into game, into your character, start DB, put in your key
b. Go to Plugins, Trinity and press "Config"
c. Under the Routine Tab, select "Force Specific Routine"
d. Choose "VyRasha Manald Archon GR Build by TwoCigars"
e. Set Archon and Non-Archon Cluster Sizes to 2/5 respectively.
f. Set Health and AP Emergency Transform to 0/1 (Lowest)
g. Choose your desired GR difficuly, import item lists, etc.

Note: DB will only run from a FRESH install. You'll have to re-setup each time you want to run it.

I don't know why this is, nor do I have the time to debug it, just remember to do this.

(5) Gear, talents, stat priority, results.

Link to Gear Build

Make sure you cube Manald Heal instead if it's under 13,800% weapon damage.
Also, cube the least perfect between Swami/Fazula. 1:3 priority ratio from 100%.
Talents are same as the link, but replace Teleport with Black Hole / Spellsteal.

Stat Priorities:

(1) CDR on everything, you need at least 62% with the talent.
(2) Attack Speed until you have AT LEAST 1.6 per second
Once you hit 2.07 unbuffed, go for CHD/CHC instead.

Once you have all the right pieces, start farming 45-50s.
Once you also have full CDR, you should be at least 55.
Once you have good attack speed and optimize, 60-65.
All three of your gems being 65+ should get you 65-70.
After that, full 65+ Augments will get you to GR70-75.

Hope you enjoy.
Click to expand...

Didnt get it... every time we need to unninstall DB, reinstall and re-setup all?
 
Just tryed to log in..

"We couldn't find a free Diablo process to attach. There are 64bit version(s) of Diablo running. Please make sure you start the 32bit client of Diablo."...
 
xsinsation said:
Just tryed to log in..

"We couldn't find a free Diablo process to attach. There are 64bit version(s) of Diablo running. Please make sure you start the 32bit client of Diablo."...
Click to expand...

This is an unrelated issue covered in the general DB guide, to fix it you will need to go to "Settings" in your Blizzard launcher (the little V button right next to the blizzard logo in the top left).

Then Navigate to "Game Settings", and make sure "Launch 32-bit client (instead of 64-bit)" is checked for both Diablo III: Reaper of Souls and Diablo III: Reaper of Souls (PTR).
 
have you tried only deleting the compiledassemblies folder before restarting? Maybe it works without re-installing everytime
 
Hi

After overwrite attach files DB does not see Trinity (use 767 and 759 verison). Before overwrite all fine.
 

Attachments

relly good job... bot was just raping content while i was playing wow on the other screen... like 5 hours in. bot starts spassing out and just running through content... nothinge helped.. tried all. still spassing... wtf!!!
not breaking doors either..
 
Baconhead said:
relly good job... bot was just raping content while i was playing wow on the other screen... like 5 hours in. bot starts spassing out and just running through content... nothinge helped.. tried all. still spassing... wtf!!!
not breaking doors either..
Click to expand...
Restart the bot.
 
I seem to have trouble getting the 4 stacks of tal rashas sometimes and will die when it could simply go into archon mode instead of waiting for the stacks. I deselected "wait for 4 stacks before going into archon" and it still waits for the stacks. I did not download the files in the OP but using what is available already in the bot. Is that the issue?
 
Hi where did you find the trinity 750 beta, i can't find a download link, because with the lastest trinity it won't work :/

Thks very much ;)
 
Hi B0wZ0oL and ditze86, I attached the Trinity BETA to the first post. I'll need to re-test with their most recent version and re-release my updates for that one.

I need to post my latest DB/Trinity and talent tweaks, it's currently running GR82s in 8-10 min without dying thanks to a custom avoidance routine.

I'm hoping to test with latest Trinity and get this out to you guys today or tomorrow - Friday at the latest. Stay tuned!
 
Did exatcly what your guide says. And this pops up, and trinity is not even under profiles.

"Demonbuddy v1.1.3154.482 started
Logging in...
T: 5247961138361880966 H: 3976271914
Attached to Diablo III with pid: 7808
Flashing window
Compiler Error: C:\Users\*****\****\*****\Plugins\Trinity\Framework\Core.cs(23,50) : error CS0722: 'RoutineManager': static types cannot be used as return types
Installed plugins"
 
I wan‘t to know how your paragon or damage your player have , and how fast you done 85s.
 
Last edited:
Would love to see/get your latest tweaks for this build, working pretty good so far!
 
Hey! Nice done! Works for me fine, atm. doing 50s in under 5min.

I just have 1 question, it seems to not Cast Hydra's, i have the Hydra Wand in Cube and the Lightning one Equiped is that Why?

In the Post you linked a D3 Mage Profile, where you have it swapped around, could this be the reason that the Bot won't cast Hydra?
 
Followed it, get a lot of compile errors and Trinity won't work.

When I try just the routine with latest trinity, it dies a LOT
 
How do i solve the problem: when im not in archon my char just stands still on the same spot and use all his mana on ray of frost and dosnt kite at all till the char die.

everything else works fine and doing huge amout of dps when im in archon but wont surive till the next archon.
 
You must log in or register to reply here.
Back
Top