What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[A3 Inferno] Alkaizer RUN Gnome Proof - Unstuckable

SHJordan said:
For some reason it doesnt work with new giles and new atom... I could at least, start it and make it work with old giles and radsatom... who knows... =\
Click to expand...


Is it possible that when you extracted giles or radsatom you forgot to double check and make sure there are no folders inside folders? It just goes straight from folder to profile?
Example of Wrong: Profile folder/Alkaizer 1.50.2/Alkazier 1.50.2/ jumpstart etc etc
Example Right: Profile folder/Alkaizer 1.50.2/ Jumpstart etc etc

Also im pretty sure new radsatom has to be Atom or radsatom without a number beside it.
 
Thats the problem bud :p Download 2.50.2 on the 51st page, It works with newest giles and atom And im sure you will enjoy it very much.

Pretty sure 2.4 is not compatable with the new versions of giles and rads yet.
 
infanint said:
Is it possible that when you extracted giles or radsatom you forgot to double check and make sure there are no folders inside folders? It just goes straight from folder to profile?
Example of Wrong: Profile folder/Alkaizer 1.50.2/Alkazier 1.50.2/ jumpstart etc etc
Example Right: Profile folder/Alkaizer 1.50.2/ Jumpstart etc etc

Also im pretty sure new radsatom has to be Atom or radsatom without a number beside it.
Click to expand...
It is set correct:
"C:\DB\Profiles\Alkaizer Pure 2.4\00.1_JumpStart_LoadMeFirst.xml"
I had doublechecked... i always do.
 
infanint said:
Thats the problem bud :p Download 2.50.2 on the 51st page, It works with newest giles and atom And im sure you will enjoy it very much.

Pretty sure 2.4 is not compatable with the new versions of giles and rads yet.
Click to expand...
I see... but... you mind linking it to me as HERE... i'm on page 14 yet haha =p
 
Sorry bud, Looks like gnomes had taken it down, I think it was a beta release before 2.50.3 because 2.50.2 had a bug in it. A good profile that i was running before i ran 2.50.2 was 2.99.2 I dont think that one works with the new giles and new trinity, But you will probably be better off checking the forum every hour or so for gnomes new release if you want the new giles/atom to work with his profile. I think he will release one tonight(2.50.3) fingers crossed! but im not sure might be tomorrow.
 
why is it that when my bot clears keep lvl2 it walks all the way back to the entrance and leaves the game?
 
mottov2 said:
why is it that when my bot clears keep lvl2 it walks all the way back to the entrance and leaves the game?
Click to expand...

I am working on it... quick as I can.

Why is it, that it took me 3-4 weeks to solve the dungeon problem in the first place? (and it's still not solved, still a couple bugs)

I make demonbuddy do things I don't think it was intended to do... but it works :) You might see some what I call stuck in a loop processing because I force DB and radatom to do what I want them do, versions 2.5 is clearly a landmark the entire code was revamped from 2.4.

Those who appreciate what I am doing can donate and add me in xfire and during coding days you may / or may not get shotgun updates, access to svn etc. I put huge amount of time, if you look some of the other profiles have 5 ppl working on it.. this one has ... 'me' and you guys for bug reports, which helps a lot.

K enough rant, back to testing.
 
ps version 3 right now runs unstoppable, and no it's not for release until extensive testing. old versions seem like a mess but I am trying desperately to fix them for compatibility issues, and usability.
 
gnomegawd said:
ps version 3 right now runs unstoppable, and no it's not for release until extensive testing. old versions seem like a mess but I am trying desperately to fix them for compatibility issues, and usability.
Click to expand...
Hmm... donating, so there IS a svn?
 
I love the alkaizer run, And coding is definently hard to do when your doing it by yourself, Ill donate.
 
Sorry man, there's so many links on the first page. Which version do I need to run? Do I choose between the versions or do I get the newest one (which is debugging?)?

Does this work with the unified giles 1.7.3?? Please respond!
 
kettlecorn said:
Sorry man, there's so many links on the first page. Which version do I need to run? Do I choose between the versions or do I get the newest one (which is debugging?)?

Does this work with the unified giles 1.7.3?? Please respond!
Click to expand...

I have not tested unified giles on anything below version 3, and no version 3 isn't available to pub only to donate. ver 3 also works with new rads.

if you want to have a flawless profile run version 1.0 with giles normal and atom 1.5.1, after that try using giles 1.7.3, it's really to bad nobody has tried to confirm this yet. I will be giving out some free donpro user account for help with past bugs etc, as I get around to it.

coding this has taken up so much time as of late that it's become a 12 hour in and out daily task for me.
 
Q
gnomegawd said:
I have not tested unified giles on anything below version 3, and no version 3 isn't available to pub only to donate. ver 3 also works with new rads.

if you want to have a flawless profile run version 1.0 with giles normal and atom 1.5.1, after that try using giles 1.7.3, it's really to bad nobody has tried to confirm this yet. I will be giving out some free donpro user account for help with past bugs etc, as I get around to it.

coding this has taken up so much time as of late that it's become a 12 hour in and out daily task for me.
Click to expand...

I can give it a test with version 1.0 and giles 1.7.3. (were talking unified right?) I monitor my bots almost 100% on my other screen at least for now so I can report back any bugs with that setup.

What is donpro account?

So I should ignore version 2 and go with version 1 cause it's the most stable right/

How do I make a donation?

Also should ask.. I put the Giles173 into the plugins folder. Do I need to put anything into the routines folder?
 
Last edited:
how to donate? does ver3 run pretty smoothly compared to ver1?
Thanks
 
Ran it a few times with GilesTrinity 1.7.1.3 and I'm not sure if its the Giles or what but in Arreat Crate level 2 seems to be wandering around for a while and getting lost. Could be a version 1.0 issue, idk.
Same thing with Field of Slaughter. For some reason the titles in the zip file don't match up with where the character goes.. it also ends up in Bridge of Korshiik and went all the way to Azmodan and got stuck. Ran fine the first time.

Could be a Giles thing. I might try with the older 1.6.3.4 Giles to see if any of the issues persist.
 
gnomegawd said:
I have not tested unified giles on anything below version 3, and no version 3 isn't available to pub only to donate. ver 3 also works with new rads.

if you want to have a flawless profile run version 1.0 with giles normal and atom 1.5.1, after that try using giles 1.7.3, it's really to bad nobody has tried to confirm this yet. I will be giving out some free donpro user account for help with past bugs etc, as I get around to it.

coding this has taken up so much time as of late that it's become a 12 hour in and out daily task for me.
Click to expand...
i been using version 2.99d with atom 1.5.1 and Unified Trinity Community Edition 1.7.1.3 for 2 days. 0 locks up, 0 issues.
thanks for all your hard work

just getting this from time to time but i dont see anything going wrong. bots works fine
Code: 
[04:05:24.268 Q] [Trinity][CacheManagement]System.AccessViolationException: Could not read bytes from 00000008 [299]!
   at Zeta.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
   at Zeta.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
   at Zeta.Internals.Actors.ACD.[](ACD , Int32 )
   at Zeta.Internals.Actors.ACD.GetAttribute[T](Int32 attribute)
   at Zeta.Internals.Actors.ACD.GetAttribute[T](ActorAttributeType attributeType)
   at Zeta.Internals.Actors.DiaUnit.get_IsUntargetable()
   at GilesTrinity.GilesTrinity.RefreshGilesUnit(Boolean AddToCache)
   at GilesTrinity.GilesTrinity.RefreshStepMainObjectType(Boolean& AddToCache)
   at GilesTrinity.GilesTrinity.CacheDiaObject(DiaObject freshObject)
   at GilesTrinity.GilesTrinity.RefreshCacheMainLoop()
 
Hi gnome,

Sorry I never mentioned how awesome your work is but its really fantastic.

I just ran 2.50.2 for like 3 hours, and monitored it like 80% of the time.

Some things I noticed was that in AC2 it would actually search the little nooks and crannies that it did not in the previous versions. However when it does, in some of them it just decides to end the run in AC2 early. It would just port out to town and start FOS instead.

I am glad you are fixing KD2 item run bug as it is pretty annoying. In KD2 it explores much more of the map instead of going straight for that KD3 port which is nice, but some times it just gets lost. One time I saw the bot spinning around in circles not knowing where to go.

Over all an improvement, but I think 2.50.1 was more efficient over.

Nice job Gnome, I dunno if you wanna go the route of writing an if statement for a item run before hitting KD2 as a quick fix for the item run bug (as looking for whats causing the bug is probably more tedious). As of now I have been contemplating on picking up less items to hopefully not trigger an item run in KD2.

Still running on Unified trinity 1.7.03, RadsAtom 1.51, DB beta .100.

Hope that helps GL.

PS how much better is Ver 3 compared to 2? I might donate if its substantial :D
 
Last edited:
Just wanted to show my support for Gnome, i've run 2.50.2 AC for 3 hrs now, netting 35mil exp/hr & 475k gold/hr. Thank you for all your hard work put into this project. Greatly appreciated.
 
You must log in or register to reply here.
Back
Top