Slippy Pete's fast (18s) or safe (23s) sarkoth profile for Barbarian

[Mr Ekko]

Pete, my stupid barb always activates the Wrath of the Berserker toghether with War Cry. Any tips on how to do so the Wrath be activated ONLY in the Sarkozy cellar?? This is really a big issue since I cannot activate speed....Btw, is not jumping also first time it starts to create additional furry...

 

[DerekC]

Another bug is that some of the times the bot misses a cellar, i checked manually as i was hitting 20 percent rate and i spotted a few that the bot misses. Anyway great profile, if looting was smoother it would be great.

 

[SlippyPete]

Pete, my stupid barb always activates the Wrath of the Berserker toghether with War Cry. Any tips on how to do so the Wrath be activated ONLY in the Sarkozy cellar?? This is really a big issue since I cannot activate speed....Btw, is not jumping also first time it starts to create additional furry...

That's the point!It activates WotB together with war cry. After that leap provides the rage needed for sprint.
Leap sometimes misses, so you wont get extra rage. In that case I gave WotB priority over using sprint because it's actually faster. Yes, sprint gives 50% MS and WotB only 20%, but this 30% speed difference only saves you like 1 second run time. WotB makes up for that second by requiring less time to kill, plus it's safer when there's no cellar because the charge back hits twice as hard.

How often does it fail to use sprint?

Another bug is that some of the times the bot misses a cellar, i checked manually as i was hitting 20 percent rate and i spotted a few that the bot misses. Anyway great profile, if looting was smoother it would be great.

I placed the midpoint as close to the start as possible and it detects all of them over here. A 20% rate is bad indeed . I'll try moving the midpoint somewhat further away to prevent this, hopefully charge can be used from further away...

would also like to know if the safe one is capable for using it on hardcore

I wouldn't bot on hardcore tbh. Even if the profile is safe enough (haven't died yet with SAFE revision 3), there's lag, disconnects, hickups and other problems to deal with.

 

[fire8085]

Pete, my stupid barb always activates the Wrath of the Berserker toghether with War Cry. Any tips on how to do so the Wrath be activated ONLY in the Sarkozy cellar?? This is really a big issue since I cannot activate speed....Btw, is not jumping also first time it starts to create additional furry...

Make sure you are using his correct profile with the correct abilities (IE: Fast profile with fast abilities)

You're supposed to sprint with WOTB to make it to the cellar quicker.

 

[fire8085]

Also, thank you for the profile.

I have a pretty well geared barb with about 28k DPS and 70k DPS with WOTB up, 302% GF gear and an enchantress that I recently bought a lot of gear for.

It was nice to see that if I do get stuck outside the cellar she has enough DPS to kill off the mobs (the templar with extra GF was nice but he couldn't kill anything to protect me)

Let's see how it turns out over the next few hours

 

[SlippyPete]

You're welcome. I'd like to know your findings

 

[Mr Ekko]

Pete, I see. Nevermind. All is cool then. Profile works like a charm.
Cheers.

 

[misiekxpxp]

I tried that rev 3,5 that u made for me and posted it in other thread. It still wont use WotB. Actually i think its cuz im using other combat routine but Belphegor just makes my demonbuddy freeze after i press start or settings so i had to remove it.

 

[SlippyPete]

I tried that rev 3,5 that u made for me and posted it in other thread. It still wont use WotB. Actually i think its cuz im using other combat routine but Belphegor just makes my demonbuddy freeze after i press start or settings so i had to remove it.

The way I intended is the profile itself should call WotB. I think it will only fail if your combat routine manages to shout and sprint before the profile does, your install is messed up or you have major lag or fps issues.
You could try installing demonbuddy 1.6 in a clean directory, download the plugins and try again? I'm sorry if that doesn't work. I'm not good at coding, and new to making profiles. Just throwing things together, hope for the best and learn while doing it

 

[fire8085]

You're welcome. I'd like to know your findings

Gets around 500k GPH when it has no hiccups.

However, once leaving it on for a few hours and heading out of the house, diablo crashes (not responding).

This has happened with other profiles as well.

There is a bunch of thread in support section about it as well, yet Tony has just said "disable all plugins".

 

[scoboose]

First off let me start by saying great profile. Thank you very much for sharing this.

With that said my barb was having a hard time finding the cellar (about 14% on 1k runs) so I made a couple changes.

• Moved the mid point check a little closer to the cellar
• With midpoint moved charge was not hitting the mobs so I removed it and now it just logs at the new mid point

Its running great now, I am back up to 50% with 1k runs. My fail time is 7-8 secs and the mobs rarely bother me while TPing to town. My slightly under geared barb is completing runs is 20 seconds.

Here is my edited profile for anyone who is having the same issues I was.
View attachment _FAST Sarkoth barbarian rev5 by Slippy Pete - Scoboose Edit.xml

 

[xergz]

First off let me start by saying great profile. Thank you very much for sharing this.

With that said my barb was having a hard time finding the cellar (about 14% on 1k runs) so I made a couple changes.

• Moved the mid point check a little closer to the cellar
• With midpoint moved charge was not hitting the mobs so I removed it and now it just logs at the new mid point

Its running great now, I am back up to 50% with 1k runs. My fail time is 7-8 secs and the mobs rarely bother me while TPing to town. My slightly under geared barb is completing runs is 20 seconds.

Here is my edited profile for anyone who is having the same issues I was.
View attachment 47032

this edit is great,my db was missing a lot of cellars with the original profile(hovering on 17-20%,500 runs).
on the negative side,if this edit doesnt detect a cellar,it charges back to the cc'd mobs and then runs back to the tp spot,wasting close to 4-5 seconds

*edit*
gah,got it,that was my fault..kill radius was too high.
another thing i noticed,after killing mobs in the cellar,it runs around for 3-4 seconds before starting to port..any way to cut that out?

 

[Pixxel]

Im just standing around in the hallway, not attack the mobs in the cellar?!


edit:! nvm, it was bcouse i didnt had all the right skills!

 

[scoboose]

this edit is great,my db was missing a lot of cellars with the original profile(hovering on 17-20%,500 runs).
on the negative side,if this edit doesnt detect a cellar,it charges back to the cc'd mobs and then runs back to the tp spot,wasting close to 4-5 seconds

*edit*
gah,got it,that was my fault..kill radius was too high.
another thing i noticed,after killing mobs in the cellar,it runs around for 3-4 seconds before starting to port..any way to cut that out?

Open the profile with a text editor and remove the following lines

<!-- Wait a bit to pick up loot :-( -->
<WaitTimer questId="1" waitTime="750" />

That should not make him stand around the cellar, its there to make sure he gets all loot.

 

[salluks]

i tired the original profile and works really well, i even managed to run it overnight at the very first try!

however, when i try scoboose's profile, the character gets stuck right outside the cellar, he doesnt go inside and also doesnt fight back when attacked by mobs, happened to me twice in 17 games already.(from what i can see, it happens when the character is not at full health, i may be wrong though)

 

[Mr Ekko]

Probably a bot or combat profile issue, but the bot is only using the leap like only 20% of the cases...In rest works like a charm.

 

[SlippyPete]

First off let me start by saying great profile. Thank you very much for sharing this.

With that said my barb was having a hard time finding the cellar (about 14% on 1k runs) so I made a couple changes.

Thanks! I checked out your log mid point and I think it's too close to some mobs. I uploaded revision 6 with a midpoint closer to the cellar but far enough from the mobs not to get attacked most of the time.
Can you check if this works for you as well?

another thing i noticed,after killing mobs in the cellar,it runs around for 3-4 seconds before starting to port..any way to cut that out?

I added the 2 waypoints and the wait timer because to me that's the only way I could get it to reliably pick up the gold. Removing this can speed up your run by couple of seconds, but leaving a game while there's gold on the ground seems weird if you're a gold farmer

Probably a bot or combat profile issue, but the bot is only using the leap like only 20% of the cases...In rest works like a charm.

Can you check revision 6? I haven't changed much, but maybe it helps.

 

[Crippleboxer]

How do you guys get such high GF? Im only at 160% :x

Resulting in the fast run only turning 250-300GPH

 

[scoboose]

Running v6 now, will report back in an hour or so and let you know how it was for me

Edit:
Cellars found in 167/331 games! (50%) with no problems. V6 working great!

Will post more results after a longer session.

 

[surfer999]

Pete, thanks for incredible fast profile! This is first time when I can see 400+ GPH on my Barb.
My gear and stats: 838 1h axe, 18500 DPS, 24755 life, 31 pickup radius, +12% MS, 267 GF.