What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[PB] [A] Mining + Engineering fully automated

Status
Not open for further replies.
tested this and it just gets stuck in duskwood.... above a inn, keeps flying back and forth in thin air........ like goes farward 20yards and back again forever....
 
Hmm.. That's a problem on the GB2 end. I'm using the profiles that comes with PB for the most part. I didn't have any problems in this area. Can you please try moving your toon to darkshire and try again?
 
tested again and just gets suck like the same way before somewhere else. :S "[6:46:23 PM:710] Next point is out of continent bounds. We are at left side of the continent. Moving to right
[6:50:06 PM:935] Changed tilemap to Azeroth, Tiled: True
[6:50:42 PM:240] Next point is out of continent bounds. We are at left side of the continent. Moving to right"

not sure if this is anything new didnt notice navi log
 
Hi
I had this problem: The bot kept mining and mining again in Elwyn; he just upped at 60 in engineering.
I manually reached 75 in engineering and then the bot went mining in Duskwood, gathering huge amounts of ore but crafting nothing.

I hope it will help you and thx for your work :)

Edit: It crafts nothing but it smelts ore
 
Last edited:
llukeen said:
tested again and just gets suck like the same way before somewhere else. :S "[6:46:23 PM:710] Next point is out of continent bounds. We are at left side of the continent. Moving to right
[6:50:06 PM:935] Changed tilemap to Azeroth, Tiled: True
[6:50:42 PM:240] Next point is out of continent bounds. We are at left side of the continent. Moving to right"

not sure if this is anything new didnt notice navi log
Click to expand...

Can you attach a full log please.
I have a feeling that maybe you didn't place the profile in HB/Plugins/ProfessionBuddy/Profiles/
 
ZazarddeCaerdydd said:
Hi
I had this problem: The bot kept mining and mining again in Elwyn; he just upped at 60 in engineering.
I manually reached 75 in engineering and then the bot went mining in Duskwood, gathering huge amounts of ore but crafting nothing.

I hope it will help you and thx for your work :)

Edit: It crafts nothing but it smelts ore
Click to expand...

Issue should be fixed now, try downloading 0.2a

EDIT: Just figured I had forgotten to upload it. sry ^^ it's 9 am here now and I haven't slept yet ^_^ It's up now though.
 
Last edited:
0.3
  • Added up to and including skill 425. It will automatically take the boat to Northrend and back when needed.
  • Minor bug fixes and tweaks.

Only catac to go, yay!
 
ZazarddeCaerdydd said:
Hi
I had this problem: The bot kept mining and mining again in Elwyn; he just upped at 60 in engineering.
I manually reached 75 in engineering and then the bot went mining in Duskwood, gathering huge amounts of ore but crafting nothing.

I hope it will help you and thx for your work :)

Edit: It crafts nothing but it smelts ore
Click to expand...

I am having the exact same issue.

I downloaded the files, placed then into the plugins folder area you specified. Enabled ProfessionBuddy, set to Gatherbuddy2, loaded mining 1-75 Elwynn and pressed start. Now it just mines over and over and over and stuck crafting at 60.
 
Also, my engineer was level 74, he is trying to make Gyromatic Micro-Adjuster. I think that the profile is reading my mining instead if that makes sense as my mining is 175+ and the MGyr Micro Adjuster requires 175.

08:42:27:373] PB 1.42:Casting Gyromatic Micro-Adjustor, recast :3000
[08:42:27:373] Spell_C::CastSpell(12590, 0, 0x0, 0) [332]
[08:42:28:641] PB 1.42:Updated tradeskills from OnSkillUpdateTimerCB
[08:42:32:106] PB 1.42:Casting Gyromatic Micro-Adjustor, recast :3000
[08:42:32:106] Spell_C::CastSpell(12590, 0, 0x0, 0) [333]
[08:42:33:931] Stop called!
 
I manually levelled the Engineering to 175 to make the Micro Adjuster, its worked pretty well since upto 300. Sometimes it gets stuck trying to make something it has not learned yet, like she stood there for 30 min trying to make Thorium Widgets untill i went and learnt it manually. All in all though this is a very good tool, and once youve cleaned up the bugs will be very popular!. Thanks!
 
M8 you have a problem at 75 of engeniring, e go farm the mats to dusk wood, the bot returns shmelt the copper and the tin, but after e try to smelt the Iron ore, but the bot dont have any.


[Gatherbuddy v2.0.0.675]:Approaching "Tin Vein" at X="-11148.01" Y="-513.1844" Z="41.43278"

[Gatherbuddy v2.0.0.675]:Harvested Tin Vein.

Going to smelt/create stuff.

Going back to Stormwind forge to create stuff.



PB 1.42:Wait Action Completed



Smelting Copper Ores.

Smelting Tin Ores.

Smelting Iron Ores.

Stopping the bot!



[Gatherbuddy v2.0.0.675]:Stopped gatherbuddy after gathering 53 nodes in 0h 40m 44s.

[Gatherbuddy v2.0.0.675]:Tin Vein: 18

[Gatherbuddy v2.0.0.675]:Copper Vein: 28

[Gatherbuddy v2.0.0.675]:Iron Deposit: 5

[Gatherbuddy v2.0.0.675]:Silver Vein: 2


 
This do not start for me :/ Have a 36 gnome. mining skill 1 and Engineering skill 58. Honorbuddy 2.0.0.5063, PB version 1.42

Can somone help ?
 
Jovetic said:
I manually levelled the Engineering to 175 to make the Micro Adjuster, its worked pretty well since upto 300. Sometimes it gets stuck trying to make something it has not learned yet, like she stood there for 30 min trying to make Thorium Widgets untill i went and learnt it manually. All in all though this is a very good tool, and once youve cleaned up the bugs will be very popular!. Thanks!
Click to expand...

Thank you very much for your report, it is very helpful. I just recently added the Micro Adjuster since it's not needed until like skill 390. I suppose I must've overlooked something when I added it. Also I would love to know every time it's trying to craft something that it hasn't learned yet, so I can fix each one of them. I believe that this issue is not present at higher skill level, as I added more check if the recipe is known before trying to create it.

Another thing that (might) bug is that it doesn't go back to the forge after training. I think I got them all covered, but if you experience something like this please also report. While making the profile, I'm getting better and better so I do think that there are fewer bugs at higher skill levels as I learned how to make a good structure that's keeping the bugs out. I then decided to take that "structure" onto the lower levels, but I suppose it's inevitable that I overlooked a thing or two while doing so as I wasn't able to test it myself.

EDIT: Just had a look at it. This is the conditions that must be true before it tries making it:
Code: 
InbagCount (10498) == 0 && InbagCount (40772) == 0 && (InbagCount (2772) + InbagCount (3575) + InbagCount (3859)) > 4
Basicly that means if you have 4 or more iron ores, bars or steel bars it'll try to make it if you don't have the tool already.
Can you confirm that you had 4 of either of these things in your bags?
Anyhow, I'll add the engineering level requirement anyways.
 
Last edited:
Daskeladden said:
This do not start for me :/ Have a 36 gnome. mining skill 1 and Engineering skill 58. Honorbuddy 2.0.0.5063, PB version 1.42

Can somone help ?
Click to expand...

You need to be higher level, this profile requires at least a flying mount.
 
"Unable to load Adamantite Farm.xml" I tried the profile with only HB2 and it was unable to load it, so I think the profile is messed up.
 
ZazarddeCaerdydd said:
"Unable to load Adamantite Farm.xml" I tried the profile with only HB2 and it was unable to load it, so I think the profile is messed up.
Click to expand...

Are you using newest HB version? I just tried and it's loading fine.
 
Status
Not open for further replies.
Back
Top