Honorbuddy 2.0.0.4354 Discussion Thread

Mar24 · Mar 23, 2011

Druid

log / start gathering get agro . fly up and down WTF!!!! can u fix druid !?!?!?!?!?

eXtOphius · Mar 23, 2011

I finally got around to testing out the DK Starter Zone quest profile, and it is the most amazing thing that I've ever seen out of a bot.

Nice work guys.

XtO

suntzzz · Mar 23, 2011

This is my first time using GB2 since it was released and I must say I'm very pleased with it. Its a shame this wasn't around earlier.

LiquidAtoR · Mar 23, 2011

LiquidAtoR said:
I'm having more Error 132's with this version, particularly on zoning at start.
Errors in the logs look like this in general:

Code:

[20:22:17:672] Activity: Initialization complete [20:22:17:672] Initialization complete. [20:22:27:190] UNK INSTR @ 0xFF7F0006 - defaulting to injection [Unknown instruction encountered at 6. (Opcode: 0000)]

At this point WoW crashes with error 132.
The bot has not been started yet (to make this clear).
It's on startup and initialize of the bot.

Got another one after startup, this time encountered at 5 instead of 6 and a crash with error 132.

Code:

[21:25:38:768] Activity: Initialization complete
[21:25:38:768] Initialization complete.
[21:30:57:708] UNK INSTR @ 0xFF790005 - defaulting to injection [Unknown instruction encountered at 5. (Opcode: 0000)]

Lockwood · Mar 23, 2011

Could someone confirm whether Mixed Mode is fixed?

Is the 'running around from hotspot to hotspot getting raped by mobs after a BG' issue fixed now?

What is the stability of this version? Is it crashing often?

bfrsmedic2 · Mar 23, 2011

Okay I notice a different thing that is happening on the Druid problem. If the mob is on top of the node, then it will work great. Flies up once, then dismount and attack great.
The problem lies in when the mob has some distance on the node and has to travel a sec or 2 to the node. Flies up and down and up and down, trying to get the node. I will
send a bug report when I get back home, but I did not notice a error in the log this morning when I started it.

IF YOU ARE USING A DRUID, DO NOT LEAVE IT RUNNING AFK! IT IS VERY OBVIOUS THAT YOU ARE A BOT!

MEDIC

Note: It is not a CC issue that I can tell, tried Hawk's and FPS and it did the same thing!

Knucklehead · Mar 24, 2011

Honorbuddy/Archbuddy are screwed up for me at the moment.

Here is what my logging is putting out:

Code:

[ArchBuddy v1.1.0.352]:Searching for digsites...
[ArchBuddy v1.1.0.352]:Found digsite Baleheim Digsite  [Distance: 8992.524 yards]
[ArchBuddy v1.1.0.352]:Found digsite Wyrmskull Digsite  [Distance: 9026.608 yards]
[ArchBuddy v1.1.0.352]:Found digsite Halgrind Digsite  [Distance: 8788.469 yards]
[ArchBuddy v1.1.0.352]:Found digsite Ymirheim Digsite  [Distance: 245.8949 yards]
[ArchBuddy v1.1.0.352]:Selected "Ymirheim Digsite" as the next digsite.
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] Casting Starfall on Ymirjar Element Shaper
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirjar Element Shaper
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirjar Element Shaper
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] Target is invalid. Switching to Ymirheim Chosen Warrior!
[Singular] Eclipse Percent: 80
[Singular] Target is invalid. Switching to Ymirheim Chosen Warrior!
[Singular] Eclipse Percent: 80
[Singular] Target is invalid. Switching to Ymirheim Chosen Warrior!
[Singular] Eclipse Percent: 80
[Singular] Casting Force of Nature on -Nobody-
[Singular] Eclipse Percent: 80
[Singular] Pet changed. Rebuilding actions mapping.
[Singular] Eclipse Percent: 80
[Singular] [Pet] Casting Attack
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirheim Chosen Warrior
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirheim Chosen Warrior
Stopping the bot!
[ArchBuddy v1.1.0.352]:Stopped Archaeologybuddy after clearing 1 digsites in 0h 21m 9s.
[ArchBuddy v1.1.0.352]:Solve Report:
[ArchBuddy v1.1.0.352]:---------------------------
[ArchBuddy v1.1.0.352]:Scepter of Xavius: 2
System.Threading.ThreadAbortException: Thread was being aborted.
   at ..GetTile(TileIdentifier wowTile)
   at Tripper.Navigation.WowNavigator.LoadTile(TileIdentifier wowTile)
   at Tripper.Navigation.WowNavigator.(Int32 x, Int32 y)
   at Tripper.RecastManaged.Detour.NavMeshTileLoader.TileLoader(Int32 x, Int32 y, Void* userArg)
   at dtNavMeshQuery.loadNeighbourTiles(dtNavMeshQuery* , UInt32 ref)
   at dtNavMeshQuery.updateSlicedFindPath(dtNavMeshQuery* , Int32 maxIter)
   at Tripper.RecastManaged.Detour.NavMeshQuery.UpdateSlicedFindPath(Int32 maxIter)
   at Tripper.Navigation.WowNavigator.FindPath(Vector3 start, Vector3 end)
   at Styx.Logic.Pathing.MeshNavigator.CanNavigateFully(WoWPoint from, WoWPoint to, Int32 maxHops)
   at Styx.Logic.Pathing.Navigator.CanNavigateFully(WoWPoint from, WoWPoint to, Int32 maxHops)
   at Styx.Logic.Pathing.Navigator.CanNavigateFully(WoWPoint from, WoWPoint to)
   at Styx.Database.NpcQueries.GetNearestNpc(WoWFactionTemplate myFaction, UInt32 mapId, WoWPoint searchLocation, UnitNPCFlags npcFlags)
   at Styx.Logic.Profiles.VendorManager.GetClosestVendor(VendorType type)

Any idea how to fix this?

Chasetruth · Mar 24, 2011

Hey guys, created a separate post about this, lots of views but no comments. Figured I'd try this thread.

I'm attaching three logs - having issues with Grind Bot - attempting to loot herbs, mining nodes and mobs when settings are turned off, trying to loot things like Brazier's, Sign Posts, Forges, Anvils, and getting stuck because they are "unlootable."

Not sure what is going on or how to fix it. I have installed and reinstalled several times to no success and tried using different profiles and CC. Is anyone else having this issue?

Let me know if anyone has any ideas.

*Not reflected in these logs, but also when I try "Mixed Mode" it says, "You have not selected a primary bot!"

Mupp · Mar 24, 2011

Knucklehead said:

Honorbuddy/Archbuddy are screwed up for me at the moment.

Here is what my logging is putting out:

Code:

[ArchBuddy v1.1.0.352]:Searching for digsites...
[ArchBuddy v1.1.0.352]:Found digsite Baleheim Digsite  [Distance: 8992.524 yards]
[ArchBuddy v1.1.0.352]:Found digsite Wyrmskull Digsite  [Distance: 9026.608 yards]
[ArchBuddy v1.1.0.352]:Found digsite Halgrind Digsite  [Distance: 8788.469 yards]
[ArchBuddy v1.1.0.352]:Found digsite Ymirheim Digsite  [Distance: 245.8949 yards]
[ArchBuddy v1.1.0.352]:Selected "Ymirheim Digsite" as the next digsite.
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] Casting Starfall on Ymirjar Element Shaper
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirjar Element Shaper
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirjar Element Shaper
[Singular] Eclipse Percent: 80
[Singular] No viable target! NOT GOOD!
[Singular] Eclipse Percent: 80
[Singular] Target is invalid. Switching to Ymirheim Chosen Warrior!
[Singular] Eclipse Percent: 80
[Singular] Target is invalid. Switching to Ymirheim Chosen Warrior!
[Singular] Eclipse Percent: 80
[Singular] Target is invalid. Switching to Ymirheim Chosen Warrior!
[Singular] Eclipse Percent: 80
[Singular] Casting Force of Nature on -Nobody-
[Singular] Eclipse Percent: 80
[Singular] Pet changed. Rebuilding actions mapping.
[Singular] Eclipse Percent: 80
[Singular] [Pet] Casting Attack
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirheim Chosen Warrior
[Singular] Eclipse Percent: 80
[Singular] Casting Starsurge on Ymirheim Chosen Warrior
Stopping the bot!
[ArchBuddy v1.1.0.352]:Stopped Archaeologybuddy after clearing 1 digsites in 0h 21m 9s.
[ArchBuddy v1.1.0.352]:Solve Report:
[ArchBuddy v1.1.0.352]:---------------------------
[ArchBuddy v1.1.0.352]:Scepter of Xavius: 2
System.Threading.ThreadAbortException: Thread was being aborted.
   at ..GetTile(TileIdentifier wowTile)
   at Tripper.Navigation.WowNavigator.LoadTile(TileIdentifier wowTile)
   at Tripper.Navigation.WowNavigator.(Int32 x, Int32 y)
   at Tripper.RecastManaged.Detour.NavMeshTileLoader.TileLoader(Int32 x, Int32 y, Void* userArg)
   at dtNavMeshQuery.loadNeighbourTiles(dtNavMeshQuery* , UInt32 ref)
   at dtNavMeshQuery.updateSlicedFindPath(dtNavMeshQuery* , Int32 maxIter)
   at Tripper.RecastManaged.Detour.NavMeshQuery.UpdateSlicedFindPath(Int32 maxIter)
   at Tripper.Navigation.WowNavigator.FindPath(Vector3 start, Vector3 end)
   at Styx.Logic.Pathing.MeshNavigator.CanNavigateFully(WoWPoint from, WoWPoint to, Int32 maxHops)
   at Styx.Logic.Pathing.Navigator.CanNavigateFully(WoWPoint from, WoWPoint to, Int32 maxHops)
   at Styx.Logic.Pathing.Navigator.CanNavigateFully(WoWPoint from, WoWPoint to)
   at Styx.Database.NpcQueries.GetNearestNpc(WoWFactionTemplate myFaction, UInt32 mapId, WoWPoint searchLocation, UnitNPCFlags npcFlags)
   at Styx.Logic.Profiles.VendorManager.GetClosestVendor(VendorType type)

Any idea how to fix this?

This is a CC problem seems like your using Singular as a druid.
Its right now only supporting Feral - Cat / Bear and Resto.

Try another CC and see if that works out better for you.

lostsk8r · Mar 24, 2011

Is there someway to force a blacklist? I must be missing it but theres a place in hyjal where this NPC is lighting up a light post and my druid just sits there staring at the light post in combat because the npc lighting the post isnt attacking, but the bot sees the char is in combat and sits there.. I want to blacklist this spot.

I also have been leveling new toons in sholozar, and theres some saronite node that is ontop of a fire patch, so it sits there trying to mine the ore but the fire damage from the patch interrupts it, so it then says blacklisting.. but I always see it end up at the same spot, I want to just blacklist a couple more spots around this spot to ensure it doesnt go there, because it cant even mount cause it sits in the fire trying to mount..

Alandra · Mar 24, 2011

Bot when was gatherring found ore below rock arc. He was flying there and flying. Is possible he blacklist it for few hours after 3-5 mins when he cannot pick up that ore?

FakeName · Mar 24, 2011

i submitted 3 bug reports via the bug report tool (a suggestion if i could, a simple "bug report sent" message in the debug logs would be awesome) just want to explain what happened via the bug.
first report wasnt right, wasnt sure what would happen, second report was following the use of one cc, which produced less of the error spam, but resulted in the same problem with the bot not doing anything, and the 3rd was with the other cc, where it spammed non-stop in my debug log.

this error would spam my debug logs, and the bot would do nothing, but if i manually hit my mount key and flew up a single spacebar tap, the bot would take off like normal, until the next time it had to land, where it would then spam errors.

spifkie · Mar 25, 2011

Bug with Proffesionsbuddy which causes it to ignor the "Post if Below MinBuyout"

Bug 914 – Professionsbuddy ignores "Post if Below MinBuyout"

Lister · Mar 25, 2011

questing is buggy had to stop bot becaus it were runnig into a wall!

[18:54:11:625] Compiling expression '((HasQuest(25514)) && (!IsQuestCompleted(25514)))' @ line 860
[18:54:12:156] Compiling quest behavior from 'C:\HB\Honorbuddy_2.0.0.4354\Quest Behaviors\MyCTM.cs'
[18:54:12:843] Goal: MyCTM: Running
[18:54:12:843] Activity: Moving To Location - X: 4641.8 Y: -1995.148
[18:54:30:796] Start/Stop button pressed.
[18:54:30:812] Stop called!

LiquidAtoR · Mar 25, 2011

LiquidAtoR said:
Got another one after startup, this time encountered at 5 instead of 6 and a crash with error 132.

Code:

[21:25:38:768] Activity: Initialization complete [21:25:38:768] Initialization complete. [21:30:57:708] UNK INSTR @ 0xFF790005 - defaulting to injection [Unknown instruction encountered at 5. (Opcode: 0000)]

And another one:
[22:19:58:135] UNK INSTR @ 0xFFD50006 - defaulting to injection [Unknown instruction encountered at 6. (Opcode: 0000)]

It seems to happen here when I am logged in with HB, HB is attached and has initialized, but is not started yet. If I zone then, I get these crashes with error 132.

Jilles · Mar 26, 2011

I really LOVE the new honorbuddy!
Though took a while to find out to set food and drink AMOUNT to 0!!
maybe its better to add an option with: [ x ] Buy Food/Drink

For the rest, great!!

in2fun · Mar 26, 2011

lostsk8r said:
Is there someway to force a blacklist? I must be missing it but theres a place in hyjal where this NPC is lighting up a light post and my druid just sits there staring at the light post in combat because the npc lighting the post isnt attacking, but the bot sees the char is in combat and sits there.. I want to blacklist this spot.

I also have been leveling new toons in sholozar, and theres some saronite node that is ontop of a fire patch, so it sits there trying to mine the ore but the fire damage from the patch interrupts it, so it then says blacklisting.. but I always see it end up at the same spot, I want to just blacklist a couple more spots around this spot to ensure it doesnt go there, because it cant even mount cause it sits in the fire trying to mount..

For the ones that want to blacklist a spot.
What I found is best is to use the "blackspot" button under the Profiles and meshs tab.
With the bot stopped. Go to one side of what you want to blacklist, hit the button. Run to other side of area, hit button again. Will put a read out in the bot.
Copy that. Now open ur profile. and add

Code:

<Blackspots>
   <Blackspot X="1353.766" Y="1547.805" Z="29.7221" Radius="5" />
</Blackspots>

With the past from bot in there. The radius will be how big of an area you want to blacklist.
Also for just a node, you can stand on the node, hit the button twice. Use readout with the Radius="5"
After putting the blackspot in profile, make sure you re-load the profile.
Its good idea to learn how to blackspot by yourself. Instead of hoping the bot just does it. You may run in to other spots down road. And if can just fix it yourself, will make your botting experience alot smoother.

Ferretbnm · Mar 26, 2011

What would be a really nice request would be maybe add a button under CC configuration or next to bot settings that says "Change Current CC" that would let you repick which CC you want to use so you dont have to exit out and restart it.

Example:
I am farming along with GB2 in affliction/default pod and then i get someone in guild that wants to run a random so i go fine and once the queue pops i end up swapping to destruction and exiting hb, restarting hb, selecting combat bot and then switch to lazylock so i can play

i looked at mixed mode but that doesnt accomplish what i am trying to do, i can easily change the selected bot and hit start, would be awesome to be able to hit select cc without restart.

chemical · Mar 26, 2011

when is druid flight form going to be fixed? he still does the bouncing crap when in combat while using GB2

vlad0327 · Mar 26, 2011

so what's the new way to force a food/drink restock?

for a repair it was

PHP:

Vendors.ForceRepair = true;

so i assume a food restock would be

PHP:

Vendors.ForceBuy = true;

or..?

Honorbuddy 2.0.0.4354 Discussion Thread

New Member

Attachments

Member

New Member

Community Developer

Member

New Member

New Member

New Member

Attachments

New Member

New Member

New Member

New Member

Member

New Member

Community Developer

New Member

New Member

New Member

Active Member

New Member