[A - Quest] Human 1-60 [KaZ]

[Bezalel]

Checklist: (things you will need to make profile work best for you)

* RunMacro.cs must be downloaded, You place it in the honorbuddy/quest behaviors/ folder (only used occasionally)
* You Must get IronForge FlightPath (and have flight enabled) before you start this profile or you will die, it beats swimming =P

nice work....
from where can i obtain RunMacro.cs?...it says it must be downloaded
are you thinking of default file that comes shipped with Honorbuddy 2.0.0.4129...but this wouldn't make any sense, since you are exclaiming it should be downloaded, or my logic failed on this one :|

 

[seafunk]

Stuck on fp for the 2nd time. Last time it got fixed by just flying to a random place. Bot returnt automatically and didn't get stuck anymore. I tried rechecking flight path use and turnt off "Learn Flightpaths". Nothing helped so far. :/ I doubt it's solely a problem of this profile, though the bug doesn't seem to appear very often, couldn't find anyone else experiencing this aside from here.

[08:31:54:545] Cleared POI - Reason Done with FP
[08:31:54:545] Cleared POI
[08:31:54:718] Changed POI to: Type: Fly, R: Update
[08:31:55:10] Cleared POI - Reason Done with FP
[08:31:55:10] Cleared POI
[08:31:55:188] Changed POI to: Type: Fly, R: Update
[08:31:55:593] Cleared POI - Reason Done with FP
[08:31:55:593] Cleared POI
[08:31:55:739] Changed POI to: Type: Fly, R: Update
[08:31:56:193] Cleared POI - Reason Done with FP
[08:31:56:193] Cleared POI
[08:31:56:337] Changed POI to: Type: Fly, R: Update
[08:31:56:760] Cleared POI - Reason Done with FP
[08:31:56:760] Cleared POI
[08:31:56:921] Changed POI to: Type: Fly, R: Update
[08:31:57:129] Cleared POI - Reason Done with FP
[08:31:57:129] Cleared POI
[08:31:57:270] Changed POI to: Type: Fly, R: Update
[08:31:57:527] Cleared POI - Reason Done with FP
[08:31:57:527] Cleared POI
[08:31:57:699] Changed POI to: Type: Fly, R: Update
[08:31:57:960] Cleared POI - Reason Done with FP
[08:31:57:960] Cleared POI
[08:31:58:103] Changed POI to: Type: Fly, R: Update
[08:31:58:267] Cleared POI - Reason Done with FP
[08:31:58:267] Cleared POI
[08:31:58:403] Changed POI to: Type: Fly, R: Update
[08:31:58:743] Cleared POI - Reason Done with FP
[08:31:58:743] Cleared POI
[08:31:58:916] Changed POI to: Type: Fly, R: Update
[08:31:59:210] Cleared POI - Reason Done with FP
[08:31:59:210] Cleared POI

 

[Bengan12]

My level 4 paladin keeps attacking the wrong mob for that quest, it started in northshire after the spie quest, then he went back for the spes when he was supposed to go after blackrock orc? manually did the quest, but on the quest after he went for the blackrock orcs. and it just keep doing this all the time.

 

[1990camaro]

I made it to lvl 24 on my human hunter with no problems, until I hit Duskwood. I started having a pathing issue on quest "In a dark corner" 'even get back to my body without an issue. I'm getting this error:

LOG:
[Behavior: MyCTM(warning)]: Unrecognized attribute 'Location' (with value of '-11082.59 -950.6249 65.27641') will be ignored.
[Behavior: MyCTM(error)]: The 'X' attribute is required, but missing. (Attribute names are case-sensitive.)
[Behavior: MyCTM(error)]: The 'Y' attribute is required, but missing. (Attribute names are case-sensitive.)
[Behavior: MyCTM(error)]: The 'Z' attribute is required, but missing. (Attribute names are case-sensitive.)
Stopping the bot!

Debug Log:
4:45:37 PM:954] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.Logic.BehaviorTree.TreeRoot.()
at Styx.Logic.BehaviorTree.TreeRoot.()
[4:45:37 PM:955] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.Logic.BehaviorTree.TreeRoot.()

 

[zeus4000]

1990camara

its the fix for in a dark corner, open the xml of the quest profile, scroll very down til you see ------ fix for the in a dark corner ------ erase the 7-8 line related to it, go pick up the book manualy and press back start, it got broken over the last few HB version i think, so simply erase it.

Zuruss

 

[ares]

hello
testet it on 2 lvl 1 palas
and he fail every time at the 2 or 3 quest
idont now spezific qust but the pala teacher give it you
but he fails becouse he have not enough money to lern the spell

 

[mevip]

hey guys.... can you please tell me how to install this ? ... where should i put these files ? ...
ProfileUpdater[v.1.1].zip (6.2 KB, 805 views)
InteractWithObject.cs (8.8 KB, 605 views)
[KaZQuest] Human 1-60 [v1.51].xml (362.0 KB, 726 views)
UseItemOn.cs (10.2 KB, 729 views)

 

[dignelzi]

I installed all the files you mentioned and ran the profile updater to get the recent xml file for the questing profile. The problem I'm having though is that it will talk to the quest giver, close the window, talk to him again and it does this over and over without accepting or doing the quest. Is there a step I'm missing that isn't on here?


Edit: I got it working. Didn't realize I needed to be a human for Northshire Abbey until later. I leveled my dwarf paladin to level 8 and it ran perfectly. It has run flawlessly (even through In a Dark Corner, I made sure I read that) and I'm now level 40 after 2 days. I am encountering a new problem though. After it picked up Pamela's Doll and and the Lone Hunter quest it crashes the game and shuts it down. Do I need to just push through the quests myself or is there a questing behavior I'm should be having? Here is the debug log.


[6:16:18 PM:567] Picking up Zaeldarr the Outcast : 27432
[6:16:18 PM:567] Goal: Picking up Zaeldarr the Outcast
[6:16:18 PM:582] Picking up Pamela's Doll : 27384
[6:16:18 PM:582] Goal: Picking up Pamela's Doll
[6:16:19 PM:426] FS_EMPTY FormatException UNK PRFX @ 0x{0:X} - defaulting to injection [Prefix Fs is not handled by handler {Mov (A3), mov [offset], eax} (instruction at 4110CA)]
[6:16:29 PM:442] exception in GetInfoBlockrocess must have frozen or gotten out of sync; InjectionFinishedEvent was never fired. - at BlueMagic.ExecutorRand.Execute()
at Styx.StyxWoW.[T](UInt32 address, CallingConvention callingConvention, Object[] args)
at Styx.WoWInternals.WoWCache.WoWCache.(UInt32 function, UInt32 caller, UInt32 index, UInt64 guid, Int32 a3, Int32 a4, Int32 a5) - Honorbuddy
[6:16:29 PM:442] Goal: Goal: Collect 1 of item with ID 12886

 

[Pandora8000]

Stuck on fp for the 2nd time. Last time it got fixed by just flying to a random place. Bot returnt automatically and didn't get stuck anymore. I tried rechecking flight path use and turnt off "Learn Flightpaths". Nothing helped so far. :/ I doubt it's solely a problem of this profile, though the bug doesn't seem to appear very often, couldn't find anyone else experiencing this aside from here.

[08:31:54:545] Cleared POI - Reason Done with FP
[08:31:54:545] Cleared POI
[08:31:54:718] Changed POI to: Type: Fly, R: Update
[08:31:55:10] Cleared POI - Reason Done with FP
[08:31:55:10] Cleared POI
[08:31:55:188] Changed POI to: Type: Fly, R: Update
[08:31:55:593] Cleared POI - Reason Done with FP
[08:31:55:593] Cleared POI
[08:31:55:739] Changed POI to: Type: Fly, R: Update
[08:31:56:193] Cleared POI - Reason Done with FP
[08:31:56:193] Cleared POI
[08:31:56:337] Changed POI to: Type: Fly, R: Update
[08:31:56:760] Cleared POI - Reason Done with FP
[08:31:56:760] Cleared POI
[08:31:56:921] Changed POI to: Type: Fly, R: Update
[08:31:57:129] Cleared POI - Reason Done with FP
[08:31:57:129] Cleared POI
[08:31:57:270] Changed POI to: Type: Fly, R: Update
[08:31:57:527] Cleared POI - Reason Done with FP
[08:31:57:527] Cleared POI
[08:31:57:699] Changed POI to: Type: Fly, R: Update
[08:31:57:960] Cleared POI - Reason Done with FP
[08:31:57:960] Cleared POI
[08:31:58:103] Changed POI to: Type: Fly, R: Update
[08:31:58:267] Cleared POI - Reason Done with FP
[08:31:58:267] Cleared POI
[08:31:58:403] Changed POI to: Type: Fly, R: Update
[08:31:58:743] Cleared POI - Reason Done with FP
[08:31:58:743] Cleared POI
[08:31:58:916] Changed POI to: Type: Fly, R: Update
[08:31:59:210] Cleared POI - Reason Done with FP
[08:31:59:210] Cleared POI

Same issue

 

[chickenl]

The learn flight path feature seems to be bugged, happens to me alot so i just switched it off. IF you search the support and dev forum you will see that it is a bug.

 

[StephanT]

I'm confused. Can I just start this profile with my level 29 Draenei, anywhere? Or do I HAVE to start with a level 1.

 

[Kickazz006]

yes stephan

@ everyone else - the FP Issue is HB. Usually it happens if you:

DC and relog while hb is on
reload while hb is on
change characters while hb is on

if it's not that issue, use the bugtracker. not this thread

STUCK issues are HB related. Turn off "use mount"

Location - i fixed his profile so that you guys stop QQ'ing about it. I've already told yall how to fix it, but not everyone reads or cares - download v 1 52

 

[StephanT]

Thanks Kick.
Does the toon HAVE to be a Human? Or can it be, a Night Elf that I bring to the Human starting point?

 

[gameownz]

So I'm using it since level 19 and it works very well had only one problem with a single quest
but I have to say he's often grinding also at green mobs that's the only bad thing so far.
Anyway thank you for this great profile.

ps: I'm 31 now

 

[Kickazz006]

Thanks Kick.
Does the toon HAVE to be a Human? Or can it be, a Night Elf that I bring to the Human starting point?

you have to be human for level 1-5 and any other "class" quests. such as the druid at level 10 you will have to go to the darnassus area to get bear? or cat? or whatever you get (or you **used** to, I don't know what they changed in cata)

 

[Bengan12]

Loading C:\Users\my local computer\HB\Default Profiles\[KaZQuest] Human 1-60 [v1 52].xml.
Changing current profile to [KaZQuest] Alliance 1-60 Human v1.51 [QuestOrder]


What the???? cant load 1,52 i have disabled your auto profile updater but it still does this.

 

[xida]

Hi, i keep getting this error randomly when i quest in duskwood, anyideas?

[Behavior: MyCTM(warning)]: Unrecognized attribute 'Location' (with value of '-11082.59 -950.6249 65.27641') will be ignored.
[Behavior: MyCTM(error)]: The 'X' attribute is required, but missing. (Attribute names are case-sensitive.)
[Behavior: MyCTM(error)]: The 'Y' attribute is required, but missing. (Attribute names are case-sensitive.)
[Behavior: MyCTM(error)]: The 'Z' attribute is required, but missing. (Attribute names are case-sensitive.)

 

[Kickazz006]

Hi, i keep getting this error randomly when i quest in duskwood, anyideas?

[Behavior: MyCTM(warning)]: Unrecognized attribute 'Location' (with value of '-11082.59 -950.6249 65.27641') will be ignored.
[Behavior: MyCTM(error)]: The 'X' attribute is required, but missing. (Attribute names are case-sensitive.)
[Behavior: MyCTM(error)]: The 'Y' attribute is required, but missing. (Attribute names are case-sensitive.)
[Behavior: MyCTM(error)]: The 'Z' attribute is required, but missing. (Attribute names are case-sensitive.)

dude.

learn to read

 

[Lister]

dude.

learn to read

Dude I posted this here before I had this too doing 2 quests the oger monokle and the Box for the old Man

I did those 2 quest by hand and then the bot did run again

 

[thaicon]

I am currently testing this on my paladin, only a few minor glitches with some quests but all in all i have to say looks amazing so far! have been semi afk for a while now and it rarely stucks.
Thanks, good work, keep up the good work and ofc + rep!