[Guide/Setup] 4 Man GRIFT 80+ - Realistic 200 B EXP Per Hour.

js4991 · Feb 23, 2016

itsmebentang updated all the new files yesterday, much better than before. Take a look if your Monk and Barb generating enough health globe.

demonkiki · Feb 23, 2016

for people using simple follow, i think we still have the same bug, i remember this being one of the issue when I was using simple follow before:

When there is silver spire, and exit to next level, leader would go in, but follower bots would be stuck in level 1, they would not click the portal to go to next level. This has always been the case before and it seems like it's still there. Do you guys have the same issue?

diegomzl · Feb 23, 2016

wish we could find a way to make the wiz ET go to the oculos buff hehhe
Im doing 82s in 11 min... with wiz ET, barb and monk globe, LoN sader.

gonna try replace LoN sader for wd now.. see if I can make 85s in good times too..
everytime I try 85 in the setup Im doing now.. it finishes with 16 to 17 min

js4991 · Feb 23, 2016

diegomzl said:
wish we could find a way to make the wiz ET go to the oculos buff hehhe
Im doing 82s in 11 min... with wiz ET, barb and monk globe, LoN sader.

gonna try replace LoN sader for wd now.. see if I can make 85s in good times too..
everytime I try 85 in the setup Im doing now.. it finishes with 16 to 17 min

Just wanna let you check few things,

Barb generate globe, no pick up (Rakoer is not working on DB) (Recommand Cain + Aquila)
Monk generate globe, no pick up
Doctor no army, so uncheck spam Voodoo to use on elite only.
Doctor only collect health globe

Wizard minimum pack size 15
Attack speed & Area Damage maximize

So, it is like More Globe = More DPS

TwoCigars · Feb 24, 2016

Just downloaded the file from the OP.

There is a BETA update...

BETA Changelog said:
Changelog: Api Changes:
--------------
- Added api for accessing the camera. (DB-153)

Bug fixes:
--------------
* Core
- DB should now succeed to launch even if its folder has been renamed (DB-148)

- Demonbuddy's compiler now supports C# 6.0 features. (DB-152)

- Now makes sure old assemblies gets cleaned up. (DB-154)

On the first run of the install, I get this in my log:
[Trinity 2.14.42] Combat routine is not installed or is not latest version, installing! // VERSION 1.2.0

Not sure on the exact changes and whether or not it affects the files itsbentang added. I hope that most of them are in the AutoFollow and SimpleFollow plugins.

Another question.

I have seen some people talking about which plugins should be enabled on follower vs. leader.

Is this how it works best?
LEADER:

☑ Adventurer
☐ QuestTools
☑ SimpleFollow
☑ Trinity

FOLLOWER:

☐ Adventurer
☑ QuestTools
☑ SimpleFollow
☑ Trinity

noobseals · Feb 24, 2016

Issue report:

Barbarian follower always fall behind or do not attack when Call of Ancients (with 2 immortal king) is equipped.

The error messages in the log are as follow:

18:10:39.006 ERROR BotMain Exception during bot tick.
Buddy.Coroutines.CoroutineUnhandledException: Exception was thrown by coroutine ---> System.NullReferenceException: 未将对象引用设置到对象的实例。
在 Trinity.Combat.Abilities.BarbarianCombat.get_CanUseCallOfTheAncients() 位置 D:\DB\bar\Plugins\Trinity\Combat\Abilities\BarbarianCombat.cs:行号 212
在 Trinity.Combat.Abilities.BarbarianCombat.GetPower() 位置 D:\DB\bar\Plugins\Trinity\Combat\Abilities\BarbarianCombat.cs:行号 29
在 Trinity.Trinity.AbilitySelector(Boolean IsCurrentlyAvoiding, Boolean UseOOCBuff, Boolean UseDestructiblePower) 位置 D:\DB\bar\Plugins\Trinity\Combat\AbilitySelector.cs:行号 85
在 Trinity.Trinity.TargetCheck(Object ret) 位置 D:\DB\bar\Plugins\Trinity\Combat\TargetCheck.cs:行号 113
在 Trinity.Helpers.BotManager.<MainCombatTask>d__8.MoveNext() 位置 D:\DB\bar\Plugins\Trinity\Helpers\BotManager.cs:行号 125
--- 引发异常的上一位置中堆栈跟踪的末尾 ---
在 System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
在 System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
在 Zeta.Bot.ActionRunCoroutine.YB?qf{<:'U00T@x=b`\]\\)RJ=".2do19CIm7X%J/If2c`jSQlcN%.MoveNext()
--- 内部异常堆栈跟踪的结尾 ---
在 Buddy.Coroutines.Coroutine.?????????????????????????????????????????(Boolean )
在 Buddy.Coroutines.Coroutine.?????????????????????????????????????????(Boolean )
在 Buddy.Coroutines.Coroutine.Resume()
在 Zeta.Bot.ActionRunCoroutine.Run(Object context)
在 Zeta.TreeSharp.Action.RunAction(Object context)
在 Zeta.TreeSharp.Action.zxP$0onsN\,l5:Sg4T\&?(VZ\,z!.MoveNext()
在 Zeta.TreeSharp.Composite.Tick(Object context)
在 Zeta.TreeSharp.PrioritySelector.^|l~-M\.FUST/^V3'Vy\,IoSD|%.MoveNext()
在 Zeta.TreeSharp.Composite.Tick(Object context)
在 Zeta.Common.HookExecutor.Run(Object context)
在 Zeta.TreeSharp.Action.RunAction(Object context)
在 Zeta.TreeSharp.Action.zxP$0onsN\,l5:Sg4T\&?(VZ\,z!.MoveNext()
在 Zeta.TreeSharp.Composite.Tick(Object context)
在 Zeta.TreeSharp.PrioritySelector.^|l~-M\.FUST/^V3'Vy\,IoSD|%.MoveNext()
在 Zeta.TreeSharp.Composite.Tick(Object context)
在 Zeta.Bot.BotMain.?????????????????????????????????????????()

sry mine is chinese version

itsmebentang · Feb 24, 2016

noobseals said:
Issue report:

Barbarian follower always fall behind or do not attack when Call of Ancients (with 2 immortal king) is equipped.

I haven't done anything to Barbarian files at all. The files I've modified was wiz, monk, and doctor related. Crusader files wasn't modified on the zipped DB also.

itsmebentang · Feb 24, 2016

TwoCigars, QuesTools should be checked also on leader. The rest is right.

TwoCigars · Feb 24, 2016

I am using the BETA from the zip, I allowed DB to update to BETA when it asked at setup. Using SimpleFollow, and the Trinity settings in second post.

ET Wizard / Globe Barb / Globe-Support Monk [Leader] / LoN Crusader

Sader is not casting bombardment on physical rotation consistently. It is casting when not on physical rotation even though selected in Trinity. Sometimes it is not casting during the Physical rotation when Bombardment is off cooldown, even when facing an elite. Even when facing a rift guardian. Again, I used settings in second post, Bombardment is set to 1 enemy and everything.

Globe settings are off as I thought this might be causing it to mess up priorities, didn't make a difference.

I am trying to watch for other issues now.

Bot now barely completes 77. Was doing much better before. Thoughts?

itsmebentang · Feb 24, 2016

TwoCigars said:
I am using the BETA from the zip, I allowed DB to update to BETA when it asked at setup. Using SimpleFollow, and the Trinity settings in second post.

ET Wizard / Globe Barb / Globe-Support Monk [Leader] / LoN Crusader

Sader is not casting bombardment on physical rotation consistently. It is casting when not on physical rotation even though selected in Trinity. Sometimes it is not casting during the Physical rotation when Bombardment is off cooldown, even when facing an elite. Even when facing a rift guardian. Again, I used settings in second post, Bombardment is set to 1 enemy and everything.

Globe settings are off as I thought this might be causing it to mess up priorities, didn't make a difference.

I am trying to watch for other issues now.

Bot now barely completes 77. Was doing much better before. Thoughts?

Don't update it to the new ones. It changes all the files I've done in zipped. It's like you've just downloaded a bare bone DB. The best is to redo everything from the zipped DB on page one.

TwoCigars · Feb 24, 2016

itsmebentang said:
Don't update it to the new ones. It changes all the files I've done in zipped. It's like you've just downloaded a bare bone DB. The best is to redo everything from the zipped DB on page one.

Thank you for the reply. Might want to add a note on the OP about it before others make my mistake

Now, time to go redo everything :/

Thank goodness for copy/pasting my trinity settings.

FEDEZ · Feb 24, 2016

Very good work, all wark fine. Now i can farm 90speed and 94 for gem up.
But i have a problem with gem up 1% chance with the follower.. always reset %..
any idea for change it ?
Tnx fedez

itsmebentang · Feb 24, 2016

FEDEZ said:
Very good work, all wark fine. Now i can farm 90speed and 94 for gem up.
But i have a problem with gem up 1% chance with the follower.. always reset %..
any idea for change it ?
Tnx fedez

When you set leader to 1%, it applies to all followers. Followers can't be changed, FEDEZ.

BTW, grats on doing 94s. I am really happy that you have taken it to a new level

TwoCigars · Feb 24, 2016

I have been trying to test the latest posted ZIP of DB, but I am having massive issues with the Nav Server ATM. Can't even get through half a GRift without NAV Server destroying my game until inactivity timers hit.

:/

To respond to the person who linked the console error message in prior posts, I put a thread in the support forum about it.

FEDEZ · Feb 24, 2016

itsmebentang said:
When you set leader to 1%, it applies to all followers. Followers can't be changed, FEDEZ.

BTW, grats on doing 94s. I am really happy that you have taken it to a new level

is work with simlyfollow or Zautofollow ?

Adventure plugin or questools ? ( follower)

noobseals · Feb 24, 2016

Hello TwoCigars, did you manage to fix the sader bomb issue? I'm also having this issue even I have reinstalled the old DB.
I started using autofollow instead of simplefollow today, I'm not sure does it matter.

xxfearxx · Feb 24, 2016

FEDEZ said:
Very good work, all wark fine. Now i can farm 90speed and 94 for gem up.
But i have a problem with gem up 1% chance with the follower.. always reset %..
any idea for change it ?
Tnx fedez

what is your group comp now?

austin909 · Feb 24, 2016

itsmebentang said:
I haven't done anything to Barbarian files at all. The files I've modified was wiz, monk, and doctor related. Crusader files wasn't modified on the zipped DB also.

Why enable QuestTools and disable Adventurer?
And if I use simplefollow, which plugin controls the gem upgrade?Adv?QT?
Leader and Follower need to be set up independently for gem update chance?
Thanks!

FEDEZ · Feb 24, 2016

austin909 said:
Why enable QuestTools and disable Adventurer?
And if I use simplefollow, which plugin controls the gem upgrade?Adv?QT?
Leader and Follower need to be set up independently for gem update chance?
Thanks!

Follower: questool
Leader: questools and adventure plugin

FEDEZ · Feb 24, 2016

anonym23 said:
If you are using hota globe barb ( http://www.diablofans.com/builds/70863-2-4-super-smash-barb-globe-barb-for-100-speeds ) in combination with a globe monk this could be for you.

I made some minor changes to make AncientSpear actually working and changed it to be used on targets further away than monk cyclone strike range to support him.
Per Trinity it has a maxRange of 60f, cyclone Strike implosion works up to 34yards, thus I tried to set a minRange for AncientSpear to 35f.
I also set my ancientspear delay to 1500ms in Trinity->Barbarian settings (can also be lower).

View attachment 198544 into Trinity/Combat/Abilities folder
View attachment 198545 into Trinity/Combat folder

Let me know if this works for you as good as it does for me. Also let me know if you have better solutions, as I didnt wanna change Trinity too much. I duplicated methods and only changed stuff in those.

I am using this with autoFollow with the following settings:
FollowDistance: 5.0 yards
Catch-Up Range: 40.0 yards

Nice work
i play with simplyfollow

[Guide/Setup] 4 Man GRIFT 80+ - Realistic 200 B EXP Per Hour.

New Member

New Member

New Member

New Member

Active Member

Member

New Member

New Member

Active Member

New Member

Active Member

Member

New Member

Active Member

Member

Member

New Member

Member

Member

Member