What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Trinity 2.14.39 - Skips Elites and Progress Globes

M

misosozi

Member
Joined
Jun 22, 2012
Messages
81
Reaction score
0
Hello.

Trinity 2.14.39:

1. Periodically skips random elites. Sometimes it just ignores them on full health and sometimes leaves during combat or after death.
2. Periodically ignores progress globes.


Tested with Crusader LoN Bombardment, Wizard DMO and DH Marauder Cluster Arrow.
Tested with various values of "Always kills elites below % health" and "Ignore Minions" flag.

Any ideas?

Cheers
 
Noticing the same thing. Will ignore, or kill two of three blues, leave last one up. Globes on ground as well.
 
whats your trinity settings? here are mine for sader LoN (elements is off and minions is off for speed runs atm), it only skips some yellows like it occasionally did before. hasn't skipped any full health using trin .39

lBEuJoT.png


also keep in mind what is it skipping the elite/orb for? is there a nearby shrine, or health globes because your low hp, or another elite pack, or is it simply just ignoring and going down the path?

progression globes can be easily missed if there is a shrine / elite nearby. hopefully the bot a. remembers where the orbs are b. remembers to go back for them (not out weighted by something else). I've seen the bot miss some grotesque orbs, but he comes back for most of them. you can see my range for elites is max, and im still having far less skipping issues than you would expect.


edit: wow even jubisman is having issues...what the hell im legit having almost no skipping issues...infact Iike I said I'm finding it's remembering everything..maybe when it goes next level it might skip a yellow or orbs after grostesque dies, very uncommon atm.

also for LoN Sader GR75+ I commented out the code to use iron skin on low hp, id rather him save ironskin for combo than use it when I ignore death and the combo is out of sync. anyone else experience that?


edit #2: sorry I may have been using my own custom weighting.cs this entire time.

if anyone is interesting in trying it out (Remember to close then open DB after replacing the file):
copy into Plugins/Trinity/Cache/Weighting.cs. Just remember to enable "Give Higher Priority to Shrines" in Trinity->Objects within DB
 

Attachments

Last edited:
ridz89 said:
whats your trinity settings? here are mine for sader LoN (elements is off and minions is off for speed runs atm), it only skips some yellows like it occasionally did before. hasn't skipped any full health using trin .39

lBEuJoT.png


also keep in mind what is it skipping the elite/orb for? is there a nearby shrine, or health globes because your low hp, or another elite pack, or is it simply just ignoring and going down the path?

progression globes can be easily missed if there is a shrine / elite nearby. hopefully the bot a. remembers where the orbs are b. remembers to go back for them (not out weighted by something else). I've seen the bot miss some grotesque orbs, but he comes back for most of them. you can see my range for elites is max, and im still having far less skipping issues than you would expect.


edit: wow even jubisman is having issues...what the hell im legit having almost no skipping issues...infact Iike I said I'm finding it's remembering everything..maybe when it goes next level it might skip a yellow or orbs after grostesque dies, very uncommon atm.

also for LoN Sader GR75+ I commented out the code to use iron skin on low hp, id rather him save ironskin for combo than use it when I ignore death and the combo is out of sync. anyone else experience that?


edit #2: sorry I may have been using my own custom weighting.cs this entire time.

if anyone is interesting in trying it out: View attachment 198011 copy into Plugins/Trinity/Cache/Weighting.cs. Just remember to enable "Give Higher Priority to Shrines" in Trinity->Objects within DB
Click to expand...
Finally found someone boting LoN sader lol. I tried .39 Trinity and Newk's crusader special Trinity, but my sader just wont stop attacking mobs with bare hands, even when SC is off cooldown (I checked both use SC OOC and spam SC). Do u see this as well?

as for the Iron skin one, Newk actually added a condition for casting IS (code merged into newest Trinity according to the patch file), what it's trying to do is to wait for the combo if CoE is less than 15000 mSec from Phy (number could be wrong). I dont find it's actually working, although i dont find any bug in it. Probably u can just make the condition for casting IS the same as for Bomb? haven't tried it, still frustrating with the normal attack issue.
 
been having those issues for a while now - it's the only thing that needs fixing for it to be good. I wrote about this issue with jubii and he said i would check for it or smt. But guessing with tripwire that got their hands full or smt :) :/
 
I can confirm this is happening. Seems to happen more frequently with smaller elites or situations where my character is moving very fast.
 
Yeah having issues getting 70 down now, cause it skippes low elites - did GR 77 before :/
 
Forfang said:
how often i must write it? Just use the dumb older version of trinity...go to guide thread for crusader and use the version where all stuff worked fine....and give a crap for newest stuff
Click to expand...


how stupid are u that u don't understand what mentioning bugs related to a thread is?
 
liuchangian said:
Finally found someone boting LoN sader lol. I tried .39 Trinity and Newk's crusader special Trinity, but my sader just wont stop attacking mobs with bare hands, even when SC is off cooldown (I checked both use SC OOC and spam SC). Do u see this as well?

as for the Iron skin one, Newk actually added a condition for casting IS (code merged into newest Trinity according to the patch file), what it's trying to do is to wait for the combo if CoE is less than 15000 mSec from Phy (number could be wrong). I dont find it's actually working, although i dont find any bug in it. Probably u can just make the condition for casting IS the same as for Bomb? haven't tried it, still frustrating with the normal attack issue.
Click to expand...

not sure why its using default attack sorry, trinity .39 has all the latest crusader changes you shouldn't need to use anything else. and yeah newks timer is also in the new .39 trinity working fine my issue was different where it would use ironskin according to the slider in trinity. i made it rather it not use it for defense, only combo. but man theres a few crusade threads I'd say most of the community is using crusader lol. probably not everyone has time to answer questions on forums.

using my weighting.cs i posted earlier and trinity .39 @ GR 75-76

BsS1wyW.png


stats are without bonus pools. Of course a quicker run (@6mins) displays over 200bil, however this is not the average, and like most other Crusaders users it calms down to average at about 150-160bil. this is for GR75-76
 
Last edited:
ridz89 said:
whats your trinity settings? here are mine for sader LoN (elements is off and minions is off for speed runs atm), it only skips some yellows like it occasionally did before. hasn't skipped any full health using trin .39

lBEuJoT.png


also keep in mind what is it skipping the elite/orb for? is there a nearby shrine, or health globes because your low hp, or another elite pack, or is it simply just ignoring and going down the path?

progression globes can be easily missed if there is a shrine / elite nearby. hopefully the bot a. remembers where the orbs are b. remembers to go back for them (not out weighted by something else). I've seen the bot miss some grotesque orbs, but he comes back for most of them. you can see my range for elites is max, and im still having far less skipping issues than you would expect.


edit: wow even jubisman is having issues...what the hell im legit having almost no skipping issues...infact Iike I said I'm finding it's remembering everything..maybe when it goes next level it might skip a yellow or orbs after grostesque dies, very uncommon atm.

also for LoN Sader GR75+ I commented out the code to use iron skin on low hp, id rather him save ironskin for combo than use it when I ignore death and the combo is out of sync. anyone else experience that?


edit #2: sorry I may have been using my own custom weighting.cs this entire time.

if anyone is interesting in trying it out (Remember to close then open DB after replacing the file):
copy into Plugins/Trinity/Cache/Weighting.cs. Just remember to enable "Give Higher Priority to Shrines" in Trinity->Objects within DB
Click to expand...

Hello.

Sometimes it skips full health and sometimes it leaves in the middle of the combat, or after death. It just run without particular reason. No shrine nearby, no goblin, nothing seems to be more important than killing elite pack :).

I can confirm that skipping elites happened before but this time I managed to count it around 18-19% of all elite pack from 10 GR runs. It happens more often now. I tried different settings, fresh installs and all standard stuff I can think of ;).

Cheers
 
Started skipping elites a few days ago, now it started completely ignoring the elite globes. Latest Trinity ( rev 426) and Adventurer ( rev 115) from the SVN. Wizard DMO build.
 
Last edited:
ridz89 said:
not sure why its using default attack sorry, trinity .39 has all the latest crusader changes you shouldn't need to use anything else. and yeah newks timer is also in the new .39 trinity working fine my issue was different where it would use ironskin according to the slider in trinity. i made it rather it not use it for defense, only combo. but man theres a few crusade threads I'd say most of the community is using crusader lol. probably not everyone has time to answer questions on forums.

using my weighting.cs i posted earlier and trinity .39 @ GR 75-76

BsS1wyW.png


stats are without bonus pools. Of course a quicker run (@6mins) displays over 200bil, however this is not the average, and like most other Crusaders users it calms down to average at about 150-160bil. this is for GR75-76
Click to expand...

How do make your adventurer says the worse run, best run?
 
ridz89 said:
not sure why its using default attack sorry, trinity .39 has all the latest crusader changes you shouldn't need to use anything else. and yeah newks timer is also in the new .39 trinity working fine my issue was different where it would use ironskin according to the slider in trinity. i made it rather it not use it for defense, only combo. but man theres a few crusade threads I'd say most of the community is using crusader lol. probably not everyone has time to answer questions on forums.

using my weighting.cs i posted earlier and trinity .39 @ GR 75-76

BsS1wyW.png


stats are without bonus pools. Of course a quicker run (@6mins) displays over 200bil, however this is not the average, and like most other Crusaders users it calms down to average at about 150-160bil. this is for GR75-76
Click to expand...

hello mate can share with me you settings in 75s-76s please
thx alot
 
For those having issues with Progress Globes not being picked up, or people who want an option. This is working with version 2.14.39 Revision 427

I have fixed the Progress Globe pickup issue, I have also added an option to disable grabbing them, which is good for Deaths Breath farming.

36c4dfee7e.png


View attachment RefreshObject.cs > DemonBuddy Folder/Plugins/Trinity/Cache/
View attachment Weighting.cs > DemonBuddy Folder/Plugins/Trinity/Cache/
View attachment MiscCombatSetting.cs > DemonBuddy Folder/Plugins/Trinity/Settings/Combat/
 
You must log in or register to reply here.
Back
Top