[A+H] Full Garrison Automation

[El Fluppe]

Seems to only do the Lvl 1 Mine route on alliance side.

yes, same for me as well

Furthermore he did not collect the wrok orders from "medium plot 1" (Gladiators Sacntuary in my case)

 

[ShortRound]

I know there are several buildings still needing codes and the first post does state this and the fact alliance mines are flawed. I just thought people might want to know what level mines are actually working to.

 

[Aion]

I checked it on alliance. Mine is still not meshed there. I will check horde a little bit later.

Edit: Checked horde, no path available. I wonder how you were able to move out of it. BTW my profile uses FlyTo, where did you get MoveTo from?

Im curious, is CB FlyTo handling better with unmeshed enough zones than MoveTo?

 

[ChronoAS]

yes, same for me as well

Furthermore he did not collect the wrok orders from "medium plot 1" (Gladiators Sacntuary in my case)

Please provide me with work order box's ID for gladiator's sanctuary. There is a popup at the start of the profile telling you how to do this.

 

[Mascoba]

Thanks for this ! Keep good work man.

 

[ynoorbz]

honestly was just thinking last night I should make a profile like this, much thanks for saving me a lot of trouble

 

[MrB]

What is the level of the enchanters building?

Level 2, the tailors is level 2 also fwiw.

 

[vcreation]

great profile
-cannot run from garrison HS area u must manually move out of your townhall
-stuck at the stair doorway of alliance trading post cannot go in, and then cannot get out stuck at doorway.

if u try to start inside townhall it says no flying abilities in this zone, however if u move to right at the door of townhall it will move out a few steps and mount up. is it possible to add use of garrison HS at the start of the profile and make it able to move out of townhall. we can use reloggering to log in each toon and run this profile

 

[ChronoAS]

great profile
-cannot run from garrison HS area u must manually move out of your townhall
-stuck at the stair doorway of alliance trading post cannot go in, and then cannot get out stuck at doorway.

if u try to start inside townhall it says no flying abilities in this zone, however if u move to right at the door of townhall it will move out a few steps and mount up. is it possible to add use of garrison HS at the start of the profile and make it able to move out of townhall. we can use reloggering to log in each toon and run this profile

What level is your trading post?

 

[smrdlja]

Lumber mill lvl 2 horde - I got quest [Legacy of the Ancients] and it confused bot when trying to put orders.

 

[vcreation]

tested today with 11x alliance toon. all different levels but only 1 with L3 townhall. everything works perfect so far however I found the following small and big issue

-L1 mine it missed a few nodes not a big deal
-enchanters has 3 items on the list and bot will make shards from 20 dust, which is stupid and it's not on a daily cooldown because u lose big gold on it. but when my enchanter don't have enchanting building it will make crystal. IMO the best way to deal with this is NOT to make any shards. I understand u turn 20 dust into 1 shard and then a shard into crystal but that may not be best idea. shards are so cheap about 20g while dust are 10g, best is to let player just buy tons of shards on AH and mail I to each of the enchanters. it will cost 1 shard per day to make a crystal. and enchanter are not queuing up for work orders. which is fine too
-toons get stuck on L2 trading post when going in stuck outside the stairs, and after interact with the guy to queue orders get stuck again at the doorway
-blacksmith toon not able to make daily item because it need a anvil and bot won't go to the building to do it

besides that it's perfect and awesome. it would be nice if we can add use of garrison HS before the profile start running just in case some of us are not log out in garrison.

I put this profile with ARelog that log in each toon one after another with runtime of 0.1 hour and 0.2 hour for toons with mining. it's @#$%ING AWESOME!!!!!!!!!!!!!!!!!!!!!!

i'll test horde side in few days when I get all my horde toon garrisions up. but so far alliance side biggest problem I found is
#1 enchanter making shard, which cause ur toon to run out of dust really fast
#2 blacksmith not go to building to do it's daily professions
#3 stuck at doorway of trading post

 

[ChronoAS]

tested today with 11x alliance toon. all different levels but only 1 with L3 townhall. everything works perfect so far however I found the following small and big issue

-L1 mine it missed a few nodes not a big deal
-enchanters has 3 items on the list and bot will make shards from 20 dust, which is stupid and it's not on a daily cooldown because u lose big gold on it. but when my enchanter don't have enchanting building it will make crystal. IMO the best way to deal with this is NOT to make any shards. I understand u turn 20 dust into 1 shard and then a shard into crystal but that may not be best idea. shards are so cheap about 20g while dust are 10g, best is to let player just buy tons of shards on AH and mail I to each of the enchanters. it will cost 1 shard per day to make a crystal. and enchanter are not queuing up for work orders. which is fine too
-toons get stuck on L2 trading post when going in stuck outside the stairs, and after interact with the guy to queue orders get stuck again at the doorway
-blacksmith toon not able to make daily item because it need a anvil and bot won't go to the building to do it

besides that it's perfect and awesome. it would be nice if we can add use of garrison HS before the profile start running just in case some of us are not log out in garrison.

I put this profile with ARelog that log in each toon one after another with runtime of 0.1 hour and 0.2 hour for toons with mining. it's @#$%ING AWESOME!!!!!!!!!!!!!!!!!!!!!!

i'll test horde side in few days when I get all my horde toon garrisions up. but so far alliance side biggest problem I found is
#1 enchanter making shard, which cause ur toon to run out of dust really fast
#2 blacksmith not go to building to do it's daily professions
#3 stuck at doorway of trading post

All 3 mine sections are working now.
On fixing enchanting.
I need a screenshot of a trading post, since I can't build it myself.
There is an anvil near mine. Bot goes there if any mine is built. Will look at small buildings solution.

About hearthstone: building is not meshed. I will add this with enchanting fix.

 

[woopidoo]

<GameObject Name="Tribute" Entry="236721" X="5523.412" Y="4523.146" Z="132.2355" /> - This is level 2 'Tribute' for Gladiator Sanctum.
<GameObject Name="Garrison Building Horde Sparring Arena V2" Entry="230478" X="5525.882" Y="4523.569" Z="131.7183" /> - Level 2 Gladiator Sanctum.
<GameObject Name="Tribute Pedestal" Entry="236744" X="5523.454" Y="4523.132" Z="131.398" /> - Level 2 Gladiator Sanctum.


No idea if this is of any use. Sorry if it isnt!

 

[ChronoAS]

<GameObject Name="Tribute" Entry="236721" X="5523.412" Y="4523.146" Z="132.2355" /> - This is level 2 'Tribute' for Gladiator Sanctum. Is this the right info you need?

Is this work order box for pvp building? Also, what's your faction?

 

[woopidoo]

This is horde. I'm pretty sure it is the 'Work order' for The Gladiator's Sanctum. Also the 'Tribute pedestal' is where you pickup the work orders. Sorry for the vagueness, Gj on the profile!

 

[Nameles]

This is awesome, working perfectly on my garrison ^^ thank you so much for this profile keep it up

 

[Dr Jackall]

I tried the 1.2 horde profile and i don't know why but it just try to cast the garrison hearthstone, doing nothing, the 1.0 still works great

 

[ChronoAS]

I tried the 1.2 horde profile and i don't know why but it just try to cast the garrison hearthstone, doing nothing, the 1.0 still works great

There's a 15 second delay there after hearthstone. Did you wait that long?

Edit: just ran profile on 6 characters for all levels of garrison (inside and outside for each level). Works as intended.

 

[Aion]

There's a 15 second delay there after hearthstone. Did you wait that long?

Edit: just ran profile on 6 characters for all levels of garrison (inside and outside for each level). Works as intended.

I am impressed how well the profile run! You have big thanks from me!!

Could you allow me to share my thoughts and shamelessly quote myself from a thread with similar botbase regarding collection of medium/small buildings with followers:

1. If we need to collect the completed work orders (Ex.: They are 13/14 done or we need to collect them by custom reason), going to the Architect Table, if not, skip to step 4.

2. Open Command Table and turn-in the completed missions (As preparation to step 3)

3. Opening Architect Table and check if all building, queued for collection have follower attached. If they have, let them keep them, if not - check if we have some ready, then do attach them, choosing the top level ones over low levels, or these predefined as favorites. We can even skip the collect and print warning, if no lvl96+ follower is available (Collecting professions work orders without 96+ follower is huge loss - means the harvest is ~50% off the expected)

4. Collect the completed work orders and fill the open queues.

5. Harvest the Mine and Garden (With the sub-option to select predefined herb grow for tomorrow, if we have follower in our Garden Tier 2/3.

6. Go back to the Architect Table and release the Followers we do still need for missions

7. Start the missions finally.

TLDR - It is much more useful, if we could collect completed work orders only with appropriate follower in the building.

Since the missions seems to be low in priority in your to-do list, they are easy to be implemented in a later stage.

Thanks.

 

[ChronoAS]

I am impressed how well the profile run! You have big thanks from me!!

Could you allow me to share my thoughts and shamelessly quote myself from a thread with similar botbase regarding collection of medium/small buildings with followers:



Since the missions seems to be low in priority in your to-do list, they are easy to be implemented in a later stage.

Thanks.

Swap 4 and 5.

Most will come with PB profile. I will try to complete your step list in a day or two.