What's new
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[PAID] [Warlock] Demonic - An Advanced Honorbuddy Warlock Routine [PvE/PvP]

Zeldrak what do u think about what i said earlier ?
i have a small suggestion to make , Why we are doing the soul swap based on HP , why we don't have it based on %, so we can make the CR SS when the HP % >20 "just an example" cause one of the main things that effect the Affli is how fast is ur group killing adds etc , so when we make it by % we don't really care , cause of ppl are slow in killing adds then my SS will still roll, and if ppl are fast in killing those adds my condition will be to stop the SS @ a that percentage so maby we wont lose all these dots and add dies.
i also start thinking that this might be good also for destro and all , like immolate , CB, so then wont be need to to keep changing HP and its also based in how fast ur raid killing adds or not ,ist 10 or 25 , N or HC and so on. i really wanna find a way to help this and get affli good , so maby this is one way, what do u think ?
 
i have a small suggestion to make , Why we are doing the soul swap based on HP , why we don't have it based on %, so we can make the CR SS when the HP % >20 "just an example" cause one of the main things that effect the Affli is how fast is ur group killing adds etc , so when we make it by % we don't really care , cause of ppl are slow in killing adds then my SS will still roll, and if ppl are fast in killing those adds my condition will be to stop the SS @ a that percentage so maby we wont lose all these dots and add dies.

A boss HP% is different to trash mobs of players. Fixed values gives better results.

Thank you. Is there anyway to turn off Malefic grasp? I notice in arena it prefers grasp rather than wanting to keep Dots up. Its doing amazing for a bot and all I control is fears and movement, just trying to up the dmg and I notice it likes Grasp and not put DoTs on everyone, just the focus target. It does put dots on everyone else just takes a while

Also does anyone know the Lock LazyLarry he has this for arena I believe high rating I was wondering how he sets it up.

MG is a last resort spell, it'll only cast it if it can't soul swap first. I'll add a cancel cast to MG so that it can get back to swapping faster.

Millz -

Log on to the buddy store and view products purchased here: Buddy Store
Log on to the buddy auth and view keys attached to your buddy auth account here: Log On - Buddy Auth Portal

You need to ensure the username you're using has both the keys your using and the products purchased on the same account, otherwise it won't load (they aren't connected).


I am almost positive the problem is an account issue on their end. All I can do is verify what you've listed above - all my accounts related to HB have the exact username, registered to the same email. The key(s) show up on the Buddy Auth page, the products purchased show up on the Store page. I had them merge 3 keys into 1 a while back so I think this somehow is confusing my account. Other than verifying that the accounts have the same username and registered under same email, how else can a user determine they're the same account. From my side it LOOKS like they're the same account, but I have no way of telling other than by the name of the account and the registered email.

Tony (one of their staff) is looking into this and he told me the same thing as you just did, but as a user all I can see is that the login names are the same and the emails are the same.

Does anything work from the store for you? Could be antivirus or firewall blocking it?

hi,

so i have millz premium WL routine now. i wonder, did anyone else ever use this for brawlgar arena? i'm level 2 at brawlgar now (lol) and it's already over. i don't see how i can make custome settings for specific enemies. for example, custom settings for the penguin you encounter at level 2 (always fear him/keep him at range, or similar stuff like that which is necessary in brawlgar arena)... does anyone have experience with this?

I've got to about rank 9 or 10 with it. Need to handle stuff manually and just activate the routine when you want to deal the damage.

Hi Millz, I bought the premium yesterday and when i put pet on Auto summon demon (auto select) while on timeless island it dismiss's all pets i try to summon cause it won't summon a pet by itself. This is what it is saying in the HB screen when i summon one.
[Demonic] [HP: 100] [Mana: 75] [Embers: 1] Active Pet [101] Does Not Match Setting [103]. Dismissing.

I also have Only Summon in combat using instant (unchecked) cause i don't want that.
Can you make it so if someone summons a pet and that pet dies, it will be automatically re-summon that pet only, This was a person can change the summoned pet without having to open the config and change it all the time. Most of the time I keep Summon pet unchecked cause I do dungeons, pve or pvp at random times and don't like having to open the config all the time. I figured the auto summon setting would do that unless it is freaking out.

Oh yea, is there a way to make the text larger for some of us that like to read it larger.

Thanks
Moboken

Hey - I'll need a log for this, but you can change the pet to a specific setting to get around it, or disable to handle it manually.

You can't adjust the size of the text/font. It breaks the GUI. An unfortunate downside to having a pretty interface.
 
Hello! Can any1 help me to fix such a lag while grinding



It appeares when character target new mob & do nothing after this message

Use Destruction talents now

Can you post a log please? That message is nothing to worry about.

Dear Millz,

Ive got a question about your warlock routine premiun version for pvp.
Does it use the double SoC trick for battleground / RBGs?

Cheers

Source: https://www.youtube.com/watch?v=T_0r39M6VJA

It does when you have MF talented. Activates when there's enough units in range to trigger the 'High AoE' value. I tend to set this to 3 or 4 for PvP.

i seem to have issues with synapse springs i have it use on CD and i see it up as if its waiting for DS or some other proc still? can u look into this thanks :)

Post a log please

Hi Millz,

Running the trial version to see how it goes. I just noticed that with destruction, the bot seems to be spamming incinerate without refereshing or even in some cases casting immolate. 99% of the time the bot will go to a target, Curse of elements, Conflagrate then begin casting incinerate until it reaches enough embers for chaos bolt. I noticed the refresh option for immolate, i selected force refresh however the bot still doesnt cast it or renew it.

Post a log please
 
Does anything work from the store for you? Could be antivirus or firewall blocking it?

nothing works, we've pretty much concluded it's a problem with my account - either the store and auth accounts are not the same account/linked although they have the same login and email, or when i asked them to merge 3 keys i purchased on separate dates this screwed up the sync. i've tried everything a "normal" techie would try, fresh installs on 3 different computers, one of which has never had HB on it. turned off AV and FW. brought my laptop to connect to entirely different networks. the best the HB staff has come up with is "your Auth and Store accounts must not be the same account or it would stream," without telling me how to fix this.

other than making sure the accounts have the same name and email what else can a USER do to make sure the accounts are the same and linked?? pretty frustrated about the sudden transition to streaming when everyone in the tech business knows there will be kinks so the backup system should be left running (SVN updates) like you and Tuanha have done. When you have thousands (hundreds of thousands?) of accounts, there are going to be kinks, I get it. That's why you leave the old system partially intact until these are fixed. In my previous life I was a sys-admin for a small ~100 employee corporation and even on that small of a scale, shit just happens when you migrate to new systems no matter how good you are or how perfectly you followed all your plans. i'm not displeased about that part, it's just how you deal with the backup plan when the shit does happen that I'm not happy with other than with Millz and Tuanha products.

I doubt there's anything anyone can do outside of the actual HB staff, but thanks for the additional support from you and Tuanha and the feedback.
 
Does anything work from the store for you? Could be antivirus or firewall blocking it?

nothing works, we've pretty much concluded it's a problem with my account - either the store and auth accounts are not the same account/linked although they have the same login and email, or when i asked them to merge 3 keys i purchased on separate dates this screwed up the sync. i've tried everything a "normal" techie would try, fresh installs on 3 different computers, one of which has never had HB on it. turned off AV and FW. brought my laptop to connect to entirely different networks. the best the HB staff has come up with is "your Auth and Store accounts must not be the same account or it would stream," without telling me how to fix this.

other than making sure the accounts have the same name and email what else can a USER do to make sure the accounts are the same and linked?? pretty frustrated about the sudden transition to streaming when everyone in the tech business knows there will be kinks so the backup system should be left running (SVN updates) like you and Tuanha have done. When you have thousands (hundreds of thousands?) of accounts, there are going to be kinks, I get it. That's why you leave the old system partially intact until these are fixed. In my previous life I was a sys-admin for a small ~100 employee corporation and even on that small of a scale, shit just happens when you migrate to new systems no matter how good you are or how perfectly you followed all your plans. i'm not displeased about that part, it's just how you deal with the backup plan when the shit does happen that I'm not happy with other than with Millz and Tuanha products.

I doubt there's anything anyone can do outside of the actual HB staff, but thanks for the additional support from you and Tuanha and the feedback.

The key issue we've been seeing is people redeeming gift keys against buddy auth accounts that don't have the honorbuddy keys attached.

I.e. username 'millz' has the HB keys attached, and username 'millznew' has been used to redeem the products. The same e-mail address doesn't help in this case, it must be the same username for both the HB key and the 3rd party products. You also need to ensure the products are enabled (green background with the link saying 'disable') under 'My Purchases'

Have you had a read of the user guides to make sure you've not missed anything?


 
It does when you have MF talented. Activates when there's enough units in range to trigger the 'High AoE' value. I tend to set this to 3 or 4 for PvP.

yea and this is the point it should work when mf on cd it does not
need f fakecast and antitap
when manualy cast seed it work only when high unit set to 1.2.3 and then it only aeo 1=2 2=4 3=6 this horrible
need dseed when i cast seed manualy f fake
why all leads cry f more seed??!

when the routine make this other interupt me 100%
need a HOTKEY
 
Last edited:
Hi Millz.

I just realised that my lock doesn't cast incinerate when i'm strafing.
but i can manually cast it. so it seems to be something with your strafe angle.

Ronkan
 
Is there a reason that your routine does not use Conflagrate before Chaos bolt to reduse the cast time?
 
Hi Millz.

I just realised that my lock doesn't cast incinerate when i'm strafing.
but i can manually cast it. so it seems to be something with your strafe angle.

Ronkan

Can you post a log please? It should be casting it when moving.

Is there a reason that your routine does not use Conflagrate before Chaos bolt to reduse the cast time?

It's considered better where possible to avoid using 3x backdraft charges for 1x chaos bolt, when they can be used to reduce the cast time of 3x incinerates instead. However, it's better to use the Chaos Bolt with procs than to wait until you drop below 3 charges.

Sure.

Thank you, Milz!

Don't steal my products, and then come here to ask me for help.
 
Last edited:
How is affli in PvE atm? Does it still replace good dots with bad dots?
am just playing affli atm , my ilvl is 588 , and doing good damage yes , but way far from all other locks , am still miss targets without dotting , and still do MG on them, and in protectors i start high and end up very low not compared to other classes but compared to all other locks that are 5 ilvl lower than me , so i dont know
 
Hey Millz, I love your profiles but for some reason my affliction is not doing as much damage compared to another profile where one of the warlocks is pulling 70-80k DPS and im sitting at probably 43k dps. I'll finish at 30-40 million damage done compared to one that is at 60 million. Anything you can do?

PS: I found out which profile does it, if you would like to know please PM me.
 
Small question. I've been getting used to destro after being comfortable with demo spec, and was hoping to gear up and tackle the kanrehad fight with lfr gear this week, as I haven't really caught up on the lock.

I'll dig through the thread for pointers if they're around, but I did notice that with grim of sacrifice when I switched to destruction, it didn't summon a pet and rebuff sac. Possibly related to the earlier post,

Pet was set to auto, then to imp, but I might have missed a setting because it did not summon or choose a pet in combat or out of combat. Manually summoning, would cause it to dismiss instead of sacrifice.

Otherwise, it seemed fine,
 
I've noticed something a few times on Garrosh. When you get MC'd with the routine in action, when you get broke out of MC's, the routine just stops.. I've had to start pausing the routine just before MCs.. Don't have a recent log of it, just letting you know.
 
I'm finding that it is not casting health funnel at all, which leads to my demon dying (and then me dying). I logged a single attack on a mob, and subsequent demon death and resummon, then my death (see attachment).
 

Attachments

Hey Millz, I love your profiles but for some reason my affliction is not doing as much damage compared to another profile where one of the warlocks is pulling 70-80k DPS and im sitting at probably 43k dps. I'll finish at 30-40 million damage done compared to one that is at 60 million. Anything you can do?

PS: I found out which profile does it, if you would like to know please PM me.

Hey - Putting a fix in soon to help with this.

Small question. I've been getting used to destro after being comfortable with demo spec, and was hoping to gear up and tackle the kanrehad fight with lfr gear this week, as I haven't really caught up on the lock.

I'll dig through the thread for pointers if they're around, but I did notice that with grim of sacrifice when I switched to destruction, it didn't summon a pet and rebuff sac. Possibly related to the earlier post,

Pet was set to auto, then to imp, but I might have missed a setting because it did not summon or choose a pet in combat or out of combat. Manually summoning, would cause it to dismiss instead of sacrifice.

Otherwise, it seemed fine,

Hey - I'd need a log file, not really sure what you mean. Better off selecting a pet yourself instead of auto.

I've noticed something a few times on Garrosh. When you get MC'd with the routine in action, when you get broke out of MC's, the routine just stops.. I've had to start pausing the routine just before MCs.. Don't have a recent log of it, just letting you know.

I put a fix in a couple of days back to resolve this. Need a log if it's still happening.

Hi Millz

i have a big FPS problem at the 25 raid.
My WoW settings are very low, can u pls read my log an can u help me, pls.
Sry for my bad english^^View attachment 141585View attachment 141586

Try enabling the anti lag settings (both) on the advanced tab.

I'm finding that it is not casting health funnel at all, which leads to my demon dying (and then me dying). I logged a single attack on a mob, and subsequent demon death and resummon, then my death (see attachment).

What happens if you increase the threshold for your pet to fall below HP value? Try changing it from pet below 40% HP to 80% and see if it works? I think Drain Life is just taking priority here.
 
What happens if you increase the threshold for your pet to fall below HP value? Try changing it from pet below 40% HP to 80% and see if it works? I think Drain Life is just taking priority here.

The settings you see are what I changed it to after the default settings not working for me, but I understand what you're saying about drain life taking over. I'll give it a try tomorrow and bottom out drain life as well so it shouldn't want to cast it at all. Will come post again with results.
 
A boss HP% is different to trash mobs of players. Fixed values gives better results.



MG is a last resort spell, it'll only cast it if it can't soul swap first. I'll add a cancel cast to MG so that it can get back to swapping faster.



Does anything work from the store for you? Could be antivirus or firewall blocking it?



I've got to about rank 9 or 10 with it. Need to handle stuff manually and just activate the routine when you want to deal the damage.



Hey - I'll need a log for this, but you can change the pet to a specific setting to get around it, or disable to handle it manually.

You can't adjust the size of the text/font. It breaks the GUI. An unfortunate downside to having a pretty interface.

-------- Bummer about changing the font size from the small 8pt to at least 10, lots of padding within the window frames and on my 24" HD monitor it is really small text.

I am trying not to use specific pet as mentioned already, that is why i wanted to use the auto select. I have been doing it manually. However the routine is supposed do the selection for ya.

Here is a log file View attachment 7544 2014-09-06 18.12.txt


Thanks
Moboken
 
-------- Bummer about changing the font size from the small 8pt to at least 10, lots of padding within the window frames and on my 24" HD monitor it is really small text.

I am trying not to use specific pet as mentioned already, that is why i wanted to use the auto select. I have been doing it manually. However the routine is supposed do the selection for ya.

Here is a log file View attachment 141668


Thanks
Moboken

Auto summon pet is disabled throughout that full log file? I need one showing the issues with dismissing and resummoning in a loop.
 
Auto summon pet is disabled throughout that full log file? I need one showing the issues with dismissing and resummoning in a loop.


[23:12:25.581 D] [Demonic ~ Debug] + AutoSummonDemon: True
[23:12:25.581 D] [Demonic ~ Debug] + DemonSelection: 5

it is in line 257 and 258

pet= demon (yea)

as soon as wow comes back online and i get in, i will make a log just for the demon (pet) summon error section..


(got a file showing the dismissing of the pet) Here it is. Hope this helps,

View attachment 5568 2014-09-06 15.10.txt
 
Last edited:
Back
Top