Mesh Fixes - Archive

[bambi_1978]

Hi, Been trying to create a profile for dungeonbuddy to farm rep for honor hold but it gets so far then gets stuck and doesn't know how to go on from there. Put it in blacklist spot but still follows same path and stops across from path to first boss.
Location is <Hotspot X="150.7017" Y="162.0493" Z="-37.24992" />
I've only put on screen shot as didn't think you needed a world map of the instance.


Have tried put it up the other side rather than down the middle and seemed to work that way, will know more once it finishes

 

[w00tsauce]

1) Bridge NE of BS in AB

2) 80% of the time the bot runs across the bridge it decides to go crazy and run off the side of the bridge, then thinking its on track it swims right under the bridge and continues to run into the wall. I would say this happens every time, but there are a couple times I dont see it happen... After getting a lot of complaints on my AB profile I tested it out pretty well. Kept getting my guy over to that area and starting bot and sure enough I would watch him try to cross bridge and go crazy.

 

[tozededao]

1) Stuck in a tree while trying to complete one quest:
http://www.wowhead.com/quest=8461
It tries to get past the tree but you cant.
2) No idea because i checked this on logs, but I assume its the path from {X:6686.088 Y:-2014.799 Z:560.4542 } and so on.

[9:03:33 PM:446] Could not generate full path from {X:6686.088 Y:-2014.799 Z:560.4542} to {X:6894.333 Y:-1977 Z:578.9598} (distance from end point to destination: 7.008611 yards)!

[9:04:45 PM:102] Could not generate full path from {X:6735.354 Y:-1954.211 Z:549.5233} to {X:6894.333 Y:-1977 Z:578.9598} (distance from end point to destination: 7.008611 yards)!

[9:05:05 PM:644] Could not generate full path from {X:6765.788 Y:-1950.56 Z:550.9189} to {X:6894.333 Y:-1977 Z:578.9598} (distance from end point to destination: 7.008611 yards)!

3) For the same reason of not having the position , I checked this on logs. On the link to the wowhead quest you can find here the mobs are, and thats where the big tree is near a cliff.

 

[sowbener]

in valliance keep there is a quest giver in the inn that is standing on a small bacony it cant walk the strairs so there can never be any good 70-80 profile be made for northrend this is very annoying fix the stairs at the inkeeper in valliance expedition

 

[exfelon]

see that's weird, because i sat and watched hb walk to that very quest giver on the balcony.

any word if the sota's problems have been fixed? is it even a meshing issue?

I've got one in grizzly hills, at the blue sky logging grounds.

1. Description of problem (where is the character located; is it jumping, standing around?) : Toons will attempt to ride (if mounted under a log that is suspended from a crane), they'll do it over and over and over, even if blacklisted.
2. Location of problem (press the 'My Location' button on HB). : X="4263.709" Y="-3147.172" Z="309.1117"
3. Attach two screenshots; one of your character at the problem (feel free to remove sensitive details) and one of the world map when opened at the location. (Sorry, I have a screen shot of the area, but the servers are down, so I couldn't get the world map one, I'll do it when the servers come back up and provide the correct images, but the one below shows the exact location of the suspended log).

 

[sowbener]

see that's weird, because i sat and watched hb walk to that very quest giver on the balcony.

any word if the sota's problems have been fixed? is it even a meshing issue?

I've got one in grizzly hills, but I'm not at home to give you the spot. I'll update later with it.

well it does't work for me are you sure?

 

[MaiN]

I won't fix any reports not following the report template. If you can't use 15 seconds to post an acceptable bug report then I can't use an hour figuring out where/what/when you mean.

 

[tozededao]

Loaded new tiled mesh for map "Expansion01".
Could not generate full path from {X:-1378.017 Y:2726.347 Z:-27.94322} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1313.892 Y:2771.248 Z:-27.10889} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1295.815 Y:2800.699 Z:-26.25456} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1294.533 Y:2811.829 Z:-25.34823} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1295.026 Y:2811.468 Z:-25.39667} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1294.521 Y:2811.828 Z:-25.34787} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Loaded new tiled mesh for map "Expansion01".
Generated path from <-1295.311, 2805.032, -25.91827> to <-1295, 2815.333, -24.68565> in 1482 ms (1.48 seconds)
Could not generate full path from {X:-1295.311 Y:2805.032 Z:-25.91827} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1295.127 Y:2811.391 Z:-25.40285} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1294.633 Y:2811.88 Z:-25.34612} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1294.997 Y:2811.499 Z:-25.39275} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1294.587 Y:2811.871 Z:-25.34579} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!
Could not generate full path from {X:-1294.998 Y:2811.488 Z:-25.39487} to {X:-1295 Y:2815.333 Z:-24.68565} (distance from end point to destination: 3.441667 yards)!

http://img143.imageshack.us/img143/8223/stuck.png

 

[exfelon]

well it does't work for me are you sure?

Absolutely, I was very surprised when I watched it walk into the inn, then up the stairs and all the way to the quest giver, then back out.

 

[tozededao]

Im pretty sure there is a UK mesh, ive botted there a lot.

 

[peteyboy23]

Im pretty sure there is a UK mesh, ive botted there a lot.

I just became aware of the issue, as reported by Nesox... the Nav server is down. I'll edit my post above accordingly.

 

[w00tsauce]

1. Description of problem - WSG Horde Base. At top of tunnel where tunnel meets flag room. Tries to run into flag room about 1 foot too soon and just runs into the wall until bot realizes it cant go that way.
2. Location of problem - <Hotspot X="945.7502" Y="1454.369" Z="344.7874" /> ifffff it tried to run from X="943.8888" it would work perfectly.

 

[strix]

1. Description of problem - bot getting stuck between Lost One's "windmill-like" building's sticks when it need to go around them
2. Locations of problem - Zangarmarsh Umbrafen Village and possibly some other Lost One's villages

 

[nathan2302]

Hb 2

I am using the HB 2.0.0.3120 version and have downloaded a herbalism farming profile. At the moment I haven't moved anything. All the default cc's and profiles are still here, I have just imported the herbalism file in with it.

I have tried using it and for some reason it will keep my character in the place where I left it and just keep spamming:

'Could not navigate to current hotspot dequeuing it!
Destination is 2692 yards away and no hostiles in range, using Travel Form
-Travel Form
Could not navigate to current hotspot dequeuing it!'

Any ideas on how I can fix this? Is it a me problem or a new HB problem?

 

[Danne206]

Post a log..

 

[slansing1991]

I searched and came up dry on this subject. My bot does about 3 quests then goes to turn them in which is fine except it sits there selecting the questgiver then closing the window and not turning the quest in over and over. Using Isis spriest, no macros, all keybinds default.

 

[hi1674]

Impossible to have waypoints but basically every roadsign is an obstacle since the toon wants to walk right over it.

 

[w00tsauce]

I searched and came up dry on this subject. My bot does about 3 quests then goes to turn them in which is fine except it sits there selecting the questgiver then closing the window and not turning the quest in over and over. Using Isis spriest, no macros, all keybinds default.

These sort of problems are not mesh issues. Definitely sounds like a profile issue. Report the problem in the thread of whichever profile you are using. Not to be a douche but dont need these posts taking up space in an important thread.

 

[Hydrra]

Ok so I have been using honorbuddy for a while now and it works great. But I have recently downloaded the new version of honorbuddy and have encounter some problems. I get everything to work to the point that I push the start button to run the bot. When I do that I get an error saying 'The type initializer for 'IoC threw an exception'. Can anyone help me to solve this problem? I'm pretty stumped right now. I am just simply trying to set it up so I can farm bg's all day.I attached my log
Attached to WoW with ID 1400
Loading Honorbuddy 2.0.0.3120 settings.
Authenticating..
Authentication successful.
New bot added!: Grind bot
New bot added!: PvP
New bot added!: Mixed
New bot added!: RaF - Combat Assist
New bot added!: Questing - Beta
Honorbuddy 2.0.0.3120 started!
Character is a level 69 Rogue
Current zone is: Orgrimmar
Building spell book
Spell book built
MeshesFolderPath has no value yet!
FormLocationX: 20
FormLocationY: 20
UseExperimentalPathFollowing: True
KillBetweenHotspots: True
LogoutForInactivity: True
LogoutInactivityTimer: 10
LogoutInactivityUseForceQuit: False
SelectedBotIndex: 0
FoodName: Food Name Here
DrinkName: Drink Name Here
MountName: Mount Name Here
LootMobs: True
SkinMobs: False
NinjaSkin: False
LootChests: True
HarvestMinerals: False
HarvestHerbs: False
UseMount: False
PullDistance: 30
LootRadius: 45
FindVendorsAutomatically: False
TrainNewSkills: False
LearnFlightPaths: True
RessAtSpiritHealers: False
GroundMountFarmingMode: False
LastUsedPath has no value yet!
MountDistance: 150
The type initializer for 'IoC' threw an exception.

 

[papatoast]

Strand of the ancients, yellow gate, can't cross over into the courtyard (heading south on map).

Freaks out entirely, does all sorts of running back and forth along the gate before eventually dequeuing.

From the log:

Could not generate full path from {X:1053.435 Y:-97.77333 Z:86.48864} to {X:1064.529 Y:-101.6481 Z:80.826} (distance from end point to destination: 7.158689 yards)!

<Hotspot X="1053.564" Y="-112.4721" Z="82.41853" />
Could not navigate to current hotspot dequeuing it!
MoveToTarget: Could not generate path to target: ******, blacklisting!

From my location:

<Hotspot X="1053.564" Y="-112.4721" Z="82.41853" />

images attached. Might be hard to find me on the map, but i'm at the yellow gate.