What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Khryptor - All in One Priest CC (PvE, PvP, RaF, Healbot)

Status
Not open for further replies.
Hi raphus, might be for me only but since 1.9.6.0 it tries to spam fade on enemy mobs in raf.
IN WSG it runs to gate and back trying to cast spell on bg members, at the point where u drop down in wsg after ressing it does an amazing piruette for about 3 minutes :P

And also has a tendency to crash a bit more... anyhow here is a log :)


NOW i get eaven more errors, exceptions and stuff... logg attached

And pulling me out of the bg!?

However big issues following into bases in wsg, walkin into walls

AND keeps spamming fade on enemies in RAF WHEN HEALING!
 

Attachments

Last edited:
I am very new to Honorbuddy (started today) and I might be doing something very simple wrong.

I have set up the directory as in the installation guide, but when I press "CC configuration" nothing happens. It says that my "current CC does not have any configuration".
Am I supposed to configure the CC in another way or what can I possibly be doing wrong?
 
okey? I used it today, some errors tho, but its maby because of the new version of HB. But your problem... have you it in the folder "C:\\Programs\HonorBuddy\CustomClass\Khryptor" Or something like that..?
 
No, mine is in C:\Users\(XXX)\Documents\Abe\Honor\Honorbuddy 1.9.6.0\CustomClasses\Khryptor
 
huge error when trying to load

Could not compile CC from C:\Users\Adne\Desktop\Honor\CustomClasses\Priest.cs!
File: Priest.cs Line: 6 Error: The type or namespace name 'Gui' does not exist in the namespace 'Khryptor' (are you missing an assembly reference?)
File: Priest.cs Line: 118 Error: The type or namespace name 'FormConfiguration' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 142 Error: The type or namespace name 'Condition' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 157 Error: The type or namespace name 'SpellPriority' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 157 Error: The type or namespace name 'CastRequirements' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 167 Error: The type or namespace name 'SpellPriority' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 167 Error: The type or namespace name 'CastRequirements' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 185 Error: The type or namespace name 'SpellPriority' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 185 Error: The type or namespace name 'CastRequirements' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 245 Error: The type or namespace name 'SpellPriority' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 245 Error: The type or namespace name 'CastRequirements' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 429 Error: The type or namespace name 'SpellPriority' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 429 Error: The type or namespace name 'CastRequirements' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 554 Error: The type or namespace name 'SpellPriority' could not be found (are you missing a using directive or an assembly reference?)
File: Priest.cs Line: 554 Error: The type or namespace name 'CastRequirements' could not be found (are you missing a using directive or an assembly reference?)
 
Updated to Version 1.14

Changelog
  • *NEW* Solo grinding support for Holy and Discipline specs ! (So you can level as holy or disc while you are running instances as a healer)
  • *REMOVED* Pull distance settings. (Instancebuddy will take care of that in instances)
  • *FIX* Yet more checks to prevent crashes.
  • *FIX* Will not attack friendly totems anymore.
 
Thanks for the quick update.
Will run this in a bit, since it's priest time to make itself usefull for the guild.

Regards, Lucky.
 
Testing! thanks for the updates mate;)

will report in with log if there will be an error.

panYama.
 
Alright, i reinstalled the CC and it works now. Think I might have been doing something noobish wrong, but i'm going strong now :)
 
Nice for you to get it working, it's a realy nice CC, Using it right now along with the InstanceBuddy plugin! :D
 
I'm having the same issue knut was. My preist is taking way too long between casts. I was killed by 1 level 30 raptor and I'm level 40, he just stood there casting every 15-10 seconds or so. I should have gotten a log file of that combat but I get the same problem when applying buffs out of combat (basically any kind of casting takes forever).

What I've noticed is it seems like it tries to cast everything at once without waiting for cooldowns. As soon as I start HB the CC will cast the first spell immediatly and I will see "spell not ready" spammed 4-5 times across my screen.

I've deleted my HB settings, redownloaded the CC and HB, and nothing seems to have done the trick. I even tried going back to version 1.13 which was working amazingly and I have the same issue. Maybe this is a HB issue? I'm using version 1.9.6.1 and I think that the shamwow CC also had toubles with this latest version.

Let me know if there's anything else I can do to help. Like I said it used to work great and I appreciate all your hard work!
 

Attachments

Hello,

Thank you for your work on this CC, it's doing a very good job for me :)
Im using it with my priest since Im level 1 (now 73) but with v1.14 I have a problem.
When my toon pull a mob, and the mob walk away by a few meters, he normaly walk forward for a very short time to be in the 30 meters range then continue to fight.
The problem with v1.14 : he will walk threw the mob, to the location where the mob was when he was pulled, then he try to wand for less than 1sec then continue the fight as usual.

I attached a very short log file showing the problem (just 1 pull, tell me if you need another log).
(The toon was running threw the mob during the cast of Devouring Plague and SW:P, then he try to wand even if Mind Blast is up since the beginning of the fight).

Is it a problem on my side? I deleted HonorBuddy, config file in AppData, WoW Cache folder, reboot etc...

Thank you and sorry if my english is bad.

[EDIT] I have the same problem with Khryptor v1.13, this problem only happens since HB 1.9.6.0 (everything was ok with HB 1.9.5.9)
 

Attachments

Last edited:
I just need to say special thanks to developer. It's running greater than I am able to play in battlegrounds and i'm always in the top 3 of all healing - even with bad gear. I will probably only use it for pvp, so I can't say anything about the pve part, but pvp is awesome :D
 
Robertoisrad said:
I'm having the same issue knut was. My preist is taking way too long between casts. I was killed by 1 level 30 raptor and I'm level 40, he just stood there casting every 15-10 seconds or so. I should have gotten a log file of that combat but I get the same problem when applying buffs out of combat (basically any kind of casting takes forever).

What I've noticed is it seems like it tries to cast everything at once without waiting for cooldowns. As soon as I start HB the CC will cast the first spell immediatly and I will see "spell not ready" spammed 4-5 times across my screen.

I've deleted my HB settings, redownloaded the CC and HB, and nothing seems to have done the trick. I even tried going back to version 1.13 which was working amazingly and I have the same issue. Maybe this is a HB issue? I'm using version 1.9.6.1 and I think that the shamwow CC also had toubles with this latest version.

Let me know if there's anything else I can do to help. Like I said it used to work great and I appreciate all your hard work!
Click to expand...

Thank you for your perfect report. I will ask you to delete your Cache folder inside WoW folder and see what happens.
 
Biibou said:
Hello,

Thank you for your work on this CC, it's doing a very good job for me :)
Im using it with my priest since Im level 1 (now 73) but with v1.14 I have a problem.
When my toon pull a mob, and the mob walk away by a few meters, he normaly walk forward for a very short time to be in the 30 meters range then continue to fight.
The problem with v1.14 : he will walk threw the mob, to the location where the mob was when he was pulled, then he try to wand for less than 1sec then continue the fight as usual.

I attached a very short log file showing the problem (just 1 pull, tell me if you need another log).
(The toon was running threw the mob during the cast of Devouring Plague and SW:P, then he try to wand even if Mind Blast is up since the beginning of the fight).

Is it a problem on my side? I deleted HonorBuddy, config file in AppData, WoW Cache folder, reboot etc...

Thank you and sorry if my english is bad.

[EDIT] I have the same problem with Khryptor v1.13, this problem only happens since HB 1.9.6.0 (everything was ok with HB 1.9.5.9)
Click to expand...

Will be fixed in next version.
 
Status
Not open for further replies.
Back
Top