[Warlock] Kanrethad Ebonlocke (Green Fire) ~ PureRotation Style

[OncheOnche]

Hey ! Thanks for yout work, but I can't find the download link (i've downloaded PureRotation), did you remove it ? :/

 

[Kronz]

I noticed a problem, which would cause PureRotation to just freeze and not cast a thing.

When I have a debuff from Kanrethad on me, PureRotation will try to use Singe Magic to remove it, but if Singe Magic is on cooldown, PureRotation won't cast any other spells, until Singe Magic is off cooldown.

This results in a massive DPS reduction to Kanrethad and his minions, because the CD on Singe Magic isn't so small that it can be safely ignored.

 

[warl0ck]

Oh Yes i dont can get these boss down and now i find this ! But it dont to that what is promised it downt controll the slaved demon and it dont do aoe when the imps coming ! Without Bot i came to the second imp wafe :-( trying this boss since patch is live :-(

Is there anything wrong ? I startet HB in BT with Destru specc and select Purerotation and klick True on The Green Fire boss Kanrethad ....

Hope anyone can help me


Sorry for bad english i am from Germany

 

[Millz]

Hey ! Thanks for yout work, but I can't find the download link (i've downloaded PureRotation), did you remove it ? :/

http://www.thebuddyforum.com/honorb...ines/all-one/99239-released-purerotation.html

I noticed a problem, which would cause PureRotation to just freeze and not cast a thing.

When I have a debuff from Kanrethad on me, PureRotation will try to use Singe Magic to remove it, but if Singe Magic is on cooldown, PureRotation won't cast any other spells, until Singe Magic is off cooldown.

This results in a massive DPS reduction to Kanrethad and his minions, because the CD on Singe Magic isn't so small that it can be safely ignored.

Thanks, added it to a 10s blacklist after casting to prevent this from happening.

Oh Yes i dont can get these boss down and now i find this ! But it dont to that what is promised it downt controll the slaved demon and it dont do aoe when the imps coming ! Without Bot i came to the second imp wafe :-( trying this boss since patch is live :-(

Is there anything wrong ? I startet HB in BT with Destru specc and select Purerotation and klick True on The Green Fire boss Kanrethad ....

Hope anyone can help me


Sorry for bad english i am from Germany

Change the routine into automatic mode. Class Config -> change Hotkey mode to Automatic.

 

[Booty]

Hello i have a problem the cc from the bot doesnt work pretty good if banish is over he doesnt refresh and let him cast a few time on me.
and my pitlord runs back after i say Move To and then click out of sight

If i want to refresh with my macro it doesnt work the bot targets to fast the old target

 

[nvidia_g80]

where can i download this profile?

 

[Millz]

If the doom lord is casting at you at all, you aren't jumping through the gateways enough. The banish is only there to give you a little bit of help, but if you're using the gateways correctly then it won't be a problem.

Pit lord running back after it's correctly placed out of LoS is generally because enslave demon expires. You'll notice it happen around the 2nd felhunter stage. When kanrethad is summoning the first doom lord, dismiss the pit lord and pick it back up again.

You can spam this macro.

/script PetDismiss() 
/target Pit Lord 
/cast Enslave Demon 
/targetlasttarget

 

[Millz]

where can i download this profile?

Read the first post in full and you'll see.

http://www.thebuddyforum.com/honorb...-ebonlocke-green-fire-purerotation-style.html

 

[nvidia_g80]

Read the first post in full and you'll see.

http://www.thebuddyforum.com/honorb...-ebonlocke-green-fire-purerotation-style.html

ty
but i cant see Kanrethad Ebonlocke setting under 'Destruction Spec'

 

[nvidia_g80]

ok thanks for your work but i got a problem when i direct download pure rotation and click on class config there is no rotation for kanrethad when i download pure rotation per svn there is a link when i open pure rotation to this thread but when i click on class config there is a error that tells that the requested value "None" couldnt be found

same issue

 

[Millz]

Delete files <Honorbuddy>/Settings/PureRotation/*

 

[Taylorhonor]

Hello, I started attempting this fight with Millz' work yesterday, and succeeded after roughly 20 tries at ilvl488. Thank you Millz. I would like to share with you the difficulties and methods of overcoming them. This WILL make it easier for you.

First thing that was wiping me was Cataclysm; this is very easy to beat. You simply have to be targeting Kanreth when he starts channeling this. He will do this in-between each summon. I found that I was switching targets at times and then forgetting to get back on him. If he is your target the bot will stop Cata. The entire room goes green when he starts channeling, at this point you have a few seconds to get him as your target. FYI, the only time you really need to stop targeting him is for the felhunter stage so get your finger off the tab key!

Imps are easy: I found that standing right behind your pit lord was the best position for this stage.

Now for the hardest part, the Felhunters: This is the part where everything has to go perfectly, and was the cause of 95% of my wipes. First thing I would recommend is dismissing your Pit Lord on the first Doom Lord as Millz has previously suggested. This will be after the first set of Felhunters. Doing this will ensure that you don?t loose pitlord during the second Feulhunter summon. Next I was having trouble with pitlord coming out and getting enslave broke by felhunters. This is the methode I would use and eventually had success. Put your summon circle right on the soulwell that starts the encounter, this will have to be refreshed after the first felhunter summon. I never once LOS'd a chaos nuke and they never killed me. You should be breaking agro more if you?re getting nuked, and in the off chance that you get a chaos nuke at you the bot will pop enough CD's to take it. Moreover, I found that I was barely ever within range of the summon circle during the fight when it was put behind the piller. Therefore, put it on the soulwell, and use it to get front and center when the felhunters start coming out. Once the Imps are killed (most of them at least) use a gate and start paying close attention. Next he will do Cata channel, after this use a gate again to ensure agro is wiped and start running over to a LOS pillar location (either side will work, just use the side that you?re on at the time) and start spamming your pet to follow and turn him on passive. I zoomed in to first person at this point because the pitlord will block your view otherwise. About the same time that your pet gets over to you, you will get the "send pet" circle on your mouse (the bot is doing its job), place him in the back corner of the LOS position. Now you should run towards the spawn gate and teleport to your circle as soon as you are in range. Target the Felhunters successively as they come out, letting the bot do the damage, and pull them in the oposite direction that you placed your pit lord. Hopefully your agro wipe was successful and Kanreth will run towards pitlord at this time. Otherwise I found that pitlord would run to help me with the fulhunters. Now the last thing about this stage, depending on your gear, you might not have the fulhunters down fast enough and Kanreth will start doing Cata; you must target him at this point to interrupt it.

Also, it is possible to survive the felhunter summon if pitlord enslave is broke, but you will need all shield CD's so try to use gates often so that you never get a chaos nuke. If you find yourself in this situation, keep pit lord targeted and spam the enslave macro provided above. Pop all CD's and let pitlord kill the hunters. Keep enslaving!

As Millz has mentioned before: Doom lord are easy, ignore them and just keep wiping agro, and make sure you get in the green fire breath as often as possible.

After the second Felhunter summon you are in the clear. Al you have to do is keep Kanreth targeted and go through the gates as often as they allow. Do not take your target off of him, a Cata wipe at this point would be devastating.

Thank you again Millz

 

[xLegendx]

How the fuck do you repair without losing your postion?

I am having trouble killing the imps though? They dont fucking die

Derp this should be on the front page
"@reatz - Click 'Class Config' and change the mode to Automatic."

No wonder it wouldnt AoE xD


Now, those damn fucking felhunters lol

 

[Webtechi]

You can hearth out to repair.. leave instance group.. go back to the entrance and it will teleport you to the last step.

 

[xLegendx]

You can hearth out to repair.. leave instance group.. go back to the entrance and it will teleport you to the last step.

Thanks man


and to anyone out there thinking you can do this with full honor PvP gear, dont do it lol.
You can't even kill the felhunters in time before he starts casting cataclysmic again.
... You get lucky once sometimes but, once the felhunters come again.... GG


Time to do LFR and get some gear
3/16 so far

 

[lordparker82]

I'm new to these forums and the application of the purerotation routine. I downloaded the zip file for purerotation and ran it in honorbuddy, there is no Kanrethad option under the destruction class. So I assumed that this was because I needed to update purerotation. I read through several forums that say you need to go though svn to update. All I see on svn are *.cs files, when I replace my origional cs files with the ones on svn I get errors and honorbuddy will not load purerotation. Like I said, I am new to this and I am sure I am doing something wrong. Any help would be much appreciated, I'm getting sick of purchasing 1 day/1 session honorbuddy keys to figure this out on my own.

 

[topper6]

Please say that you are close to a realese on this xD and if you need beta testing, gimme a shout

Nihon you noob

 

[Millz]

I'm new to these forums and the application of the purerotation routine. I downloaded the zip file for purerotation and ran it in honorbuddy, there is no Kanrethad option under the destruction class. So I assumed that this was because I needed to update purerotation. I read through several forums that say you need to go though svn to update. All I see on svn are *.cs files, when I replace my origional cs files with the ones on svn I get errors and honorbuddy will not load purerotation. Like I said, I am new to this and I am sure I am doing something wrong. Any help would be much appreciated, I'm getting sick of purchasing 1 day/1 session honorbuddy keys to figure this out on my own.

You need to update it using an SVN tool; TortoiseSVN - Downloads

Plenty of guides around on how to do it.

 

[lordparker82]

You need to update it using an SVN tool; TortoiseSVN - Downloads

Plenty of guides around on how to do it.

Thank you very much, works like a charm, genius work.

 

[catmilklol]

Great work on this !!

Just wandering is there anything i can do to stop it from constantly changin targets and Banishing/fearing the doomguards? So it focuses on killing the boss.