What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

HB ARCHIVES: Cava?s Profiles--DO NOT DELETE

HelloMrOwl said:
Gnome Monk 1-60 in 1 day exactly. 95% bot, 5% me (doing monk quests for extra XP and other misc quests the bot couldn't complete at the time.)
Click to expand...

Thats nice, lets see if i can release the Nagrand 65-67 in time to be used :), it?s almost done but need test it first

thats 5% is it any part profile related? or all bot side? like paths mesh etc?
 
Cava said:
the log you upload do not have any profile

[20:59:57.378 N] Changing current profile to Empty Profile

[00:16:43.216 N] Can not start quest bot - this profile does not contain a quest order!
Click to expand...

Well I didn't change anything, and it is in fact working. almost at 16 since I posted about my issue. No work from me.
 
Cava said:
Thats nice, lets see if i can release the Nagrand 65-67 in time to be used :), it?s almost done but need test it first

thats 5% is it any part profile related? or all bot side? like paths mesh etc?
Click to expand...

Questing in hellfire, toon hearthed to blasted lands then got stuck. Never set hearth to the inn in hellfire. It was attempting to pick up a quest for some reason.

Also it was mostly path mesh but a few was profile side, which you resolved.

Edit: Also the bot's not wanting to fly for some reason, not sure if that pertains to your profile or not. It'll fly at times but mostly it just runs around on a flying mount.
 
Last edited:
HelloMrOwl said:
Questing in hellfire, toon hearthed to blasted lands then got stuck. Never set hearth to the inn in hellfire. It was attempting to pick up a quest for some reason.

Also it was mostly path mesh but a few was profile side, which you resolved.

Edit: Also the bot's not wanting to fly for some reason, not sure if that pertains to your profile or not. It'll fly at times but mostly it just runs around on a flying mount.
Click to expand...
changed the way he save at in at hellfire, will not fail now
fixed at revision 228
Thanks for reporting
 
HelloMrOwl said:
Edit: Also the bot's not wanting to fly for some reason, not sure if that pertains to your profile or not. It'll fly at times but mostly it just runs around on a flying mount.
Click to expand...

not fly?? he MUST fly after hellfire, can you please upload the log where hes not?
 
chainsawsyo said:
I am having a problem early on, where he opens the up the flight point map and just stares at it. I am not sure if it's looking for something that clearly isn't there or if it is just acting crazy.
I say early on because he is lvl 10 human paladin
Click to expand...

[20:59:57.378 N] Changing current profile to Empty Profile

this was for bg bot on your 90 orc monk

if you relog to another toon, you MUST restart the bot and then of course load a profile manually
 
Cava said:
not fly?? he MUST fly after hellfire, can you please upload the log where hes not?
Click to expand...

I will when I get back home. He was flying more often but there were certain times I noticed, say running from hellfire to the draenei settlement to buy from a vendor (from some reason) and running from the cave under honor hold back to the quest turn in he would run on the flying mount instead of flying.
 
Cava - soon we're going to rewrite combatuseitemon and name it CombatUseItemOn2 (for about a month) and then replace combatuseitemon with combatuseitemon2 ... it will have a lot more logic in it and a multiple hotspot hunting ground as well

UseItemOn and InteractWith will also get hunting grounds as well

ie:
Code: 
<CB file IW ~~~~~ >
<Hotspots> // this is still up in the air, if we're going to make a tag just for hotspots, or just accept hotspots inside of it like collectthings
~~
~~
~~
</Hotspots>
</CB>

similar to what CollectThings already does

Code: 
                <CustomBehavior File="CollectThings" CollectUntil="QuestComplete" QuestId="13883" ObjectId="195012" CollectItemId="46357" CollectItemCount="10" HuntingGroundRadius="200" X="3402.582" Y="1194.723" Z="-1.727643" />
                <CustomBehavior File="CollectThings" CollectUntil="RequiredCountReached" QuestId="13890" MobId="3721" CollectItemId="46365" CollectItemCount="10" HuntingGroundRadius="200" X="3402.582" Y="1194.723" Z="-1.727643" />
                <CustomBehavior File="CollectThings" QuestId="27450" MobId="45655" CollectItemCount="8" CollectItemId="61293" HuntingGroundRadius="200" >
                    <Hotspot X="1977.899" Y="-4305.448" Z="16.12026" />
                    <Hotspot X="2024.943" Y="-4298.853" Z="15.07417" />
                    <Hotspot X="2069.486" Y="-4339.637" Z="11.62121" />
                </CustomBehavior>
                <CustomBehavior File="AscendInWater" />
                
                <CustomBehavior File="CollectThings" QuestId="" ObjectId="" CollectItemCount="" CollectItemId="" HuntingGroundRadius="200" >
                </CustomBehavior>
                <CustomBehavior File="AscendInWater" />
                
                <CustomBehavior File="CollectThings" QuestId="" MobId="" CollectUntil="QuestComplete" HuntingGroundRadius="200" >
                </CustomBehavior>
                <CustomBehavior File="AscendInWater" />

I'll attach the files in here once CJ gives them to me
 
HelloMrOwl said:
I will when I get back home. He was flying more often but there were certain times I noticed, say running from hellfire to the draenei settlement to buy from a vendor (from some reason) and running from the cave under honor hold back to the quest turn in he would run on the flying mount instead of flying.
Click to expand...

->say running from hellfire to the draenei settlement to buy from a vendor (from some reason) thats normal the code line says to buy not fly but its realy near
->and running from the cave under honor hold back to the quest turn in he would run on the flying mount instead of flying thats normal too, he cant fly inside cave
 
Kickazz006 said:
Cava - soon we're going to rewrite combatuseitemon and name it CombatUseItemOn2 (for about a month) and then replace combatuseitemon with combatuseitemon2 ... it will have a lot more logic in it and a multiple hotspot hunting ground as well

UseItemOn and InteractWith will also get hunting grounds as well

ie:
Code: 
<CB file IW ~~~~~ >
<Hotspots> // this is still up in the air, if we're going to make a tag just for hotspots, or just accept hotspots inside of it like collectthings
~~
~~
~~
</Hotspots>
</CB>

similar to what CollectThings already does

Code: 
                <CustomBehavior File="CollectThings" CollectUntil="QuestComplete" QuestId="13883" ObjectId="195012" CollectItemId="46357" CollectItemCount="10" HuntingGroundRadius="200" X="3402.582" Y="1194.723" Z="-1.727643" />
                <CustomBehavior File="CollectThings" CollectUntil="RequiredCountReached" QuestId="13890" MobId="3721" CollectItemId="46365" CollectItemCount="10" HuntingGroundRadius="200" X="3402.582" Y="1194.723" Z="-1.727643" />
                <CustomBehavior File="CollectThings" QuestId="27450" MobId="45655" CollectItemCount="8" CollectItemId="61293" HuntingGroundRadius="200" >
                    <Hotspot X="1977.899" Y="-4305.448" Z="16.12026" />
                    <Hotspot X="2024.943" Y="-4298.853" Z="15.07417" />
                    <Hotspot X="2069.486" Y="-4339.637" Z="11.62121" />
                </CustomBehavior>
                <CustomBehavior File="AscendInWater" />
                
                <CustomBehavior File="CollectThings" QuestId="" ObjectId="" CollectItemCount="" CollectItemId="" HuntingGroundRadius="200" >
                </CustomBehavior>
                <CustomBehavior File="AscendInWater" />
                
                <CustomBehavior File="CollectThings" QuestId="" MobId="" CollectUntil="QuestComplete" HuntingGroundRadius="200" >
                </CustomBehavior>
                <CustomBehavior File="AscendInWater" />

I'll attach the files in here once CJ gives them to me
Click to expand...
perfect, thats a very nice improvment, thanks for the warning

will Combatuseitemon got that too?
 
Cava,

Here's the combatuseitemon and a couple of examples - it's a totally new build by Chinajade
 

Attachments

Kickazz006 said:
Cava,

Here's the combatuseitemon and a couple of examples - it's a totally new build by Chinajade
Click to expand...
realy thanks for that, and the ideas for UseItemStrategy&RecallPetAtMobPercentHealth are amazing
 
bjsaust said:
In [A-Quest]BurningSteppes(49-52)[Cava] I had to add Ariok - 48559 to the avoid mobs, as he'd come across a Horde player being accompanied by Ariok and just follow around trying to attack forever.
Click to expand...

Had to do this in [A-Quest]Felwood(48-49)[Cava] also, bot does some stuff in burning steppes map for the profile.
 
bjsaust said:
Had to do this in [A-Quest]Felwood(48-49)[Cava] also, bot does some stuff in burning steppes map for the profile.
Click to expand...
i made tanaris and felwood maps, just because one bugged quest at searing gorge
bliz already fixed that quest, and i move back to old path using searing gorge, you just need update your svn
 
Added [A-Quest]Nagrand(65-67)[Cava]

Now alliance can go till level 67

Hope you enjoy
 
Searing gorge not working it just says moving to main city and stays glitched and attacks every mob close to him and never does anything any fix?
 
eldiablo7131 said:
Searing gorge not working it just says moving to main city and stays glitched and attacks every mob close to him and never does anything any fix?
Click to expand...
upload log please, need know whre is the problem to fix it
 
Changing current profile to MountsBy[Cava]
[Profile Message]: Compiling Mounts By Cava
[LoadProfile-v241(info) @line 25]: Loading profile 'MovetoMainCity[Cava].xml'
Changing current profile to Move to Main City[Cava]
[Profile Message]: Compiling Move to Main City
 

Attachments

eldiablo7131 said:
Changing current profile to MountsBy[Cava]
[Profile Message]: Compiling Mounts By Cava
[LoadProfile-v241(info) @line 25]: Loading profile 'MovetoMainCity[Cava].xml'
Changing current profile to Move to Main City[Cava]
[Profile Message]: Compiling Move to Main City
Click to expand...

You dont have lvl 40 mount skill bot is running to Darnasus to train and buy mount (you are NightElf)

because that bot ALWAYS will run to Stormwind and from SW to Darnassus then back to SW and from there back to Searing Gorge, everytime you interrupt the move sequence, bot will start again moving to SW

you have 2 options:
-Learn skill mount, move your char to Searing Gorge and start Bot (fastest)
-just start bot and dont interrupt (slowest)

the profiles are made to do all things but there are too many maps too many options.
The only way is, always move bot to SW and from there move it again to where bot needs to go, your case is darnassus to learn and buy mount
 
You must log in or register to reply here.
Back
Top