What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Saberstalker Rep Grind

nooblar91

nooblar91

Member
Joined
Aug 31, 2014
Messages
62
Saberstalker Rep Grind Tannaan

My First profile I have made and tested over night. farmed about 1000 claws and to honored from friendly 0 deaths i put a few of the hot spots near rare spawns as well so it should get them. still working on getting them all in and will update once i get it a little better. It's a simple profile to just kill the elites in Fang'Rila and loot them for the claws and some rep. its done fine so far for me with a 690 BM monk and I havent tested on any other character so far. its a tough grind due to knock backs of some of the mobs and them all being elites so use at your own risk.

Any feedback or tips would be helpful seeing as i did this in about 2 hours and its my first one ever.

View attachment Saberstalkers rep.xml
 
Last edited:
well test it on a destro lock with void ilvl 680 well be back with feed back once i test it
small profile with few hot spot it does the job thanks
 
Last edited:
Farming as we speak with a 690 Frost 2h Dk and it's going ok.I sometimes drop under 50% but the bot recovers fast.Don't forget to get the "Well Fed" buff wich increases your primary stat, a flask and an augumented rune.
For those of you who don't know,use Grind Bot.
Happy Farming!
 
I've been testing with TuanHa paid routine on my monk and ran it a bit on my DK which is about 650 (Didn't do so well). and i have also tested with singular on my monk and both seem to do fine. if this one works out and does well i might try and make one for throne of KJ. seems to have a really high drop rate of baleful gear and the tokens to upgrade them as well.
 
in the process of writing a small one for throne of KJ but have to add a lot of blackspots because of the debuff. trying to write it between work and sleep but ill post it up when i feel its decent enough to 90% AFKable
 
665 Prot Pally Half way through revered running it off an on for past 2 days.

avg almost 2 deaths an hour, but runs back to body just fine 99% of the time.
 
Runs well when it pulls 1-2 mobs, when it pulls 4+ is when i get killed. Good profile. THey need to change those claws to BOA
 
abramovk said:
dont repair. bad profile
Click to expand...

if your not satisfied with it then there are plenty of paid profiles on the store that repair. ive ran this for 10 hours straight on my monk with maybe 3 deaths and never needed to repair. perhaps your just not geared enough to AFK this profile or just not right spec or a squishy class. i cant be sure since all you've done is say its a bad profile. but your welcome for this anyway.
 
tested on 690 bm hunter running tuahna premium. my only issue is it tends not to engage when it mounts up, it will run from hotspot to hotspot pulling mobs till it gets dismounted and then it will fight. if moving from one hotspot to the next is close enough that it doesn't have to mount it pulls the new mobs normally. just a good thing that my hunter can comfortably handle 6 or so of them at once lol
 
Running flawlessly on a 690 protection warrior. Also, is there any chance to get a vendor support as well? If it's not too much of a hassle, that is.
 
Works good for me, druid tank 690 with Vivianne as follower! No deaths for me ^^
edit: can you add to aggro Gloomtalon? Are 600 freerep = 20 mob.
the mob is : http://www.wowhead.com/npc=92508/gloomtalon
With your route you enter in the cave where he is located, but don't aggro him.
 
Last edited:
obscures said:
Works good for me, druid tank 690 with Vivianne as follower! No deaths for me ^^
edit: can you add to aggro Gloomtalon? Are 600 freerep = 20 mob.
the mob is : http://www.wowhead.com/npc=92508/gloomtalon
With your route you enter in the cave where he is located, but don't aggro him.
Click to expand...

I modified the XML to add the MobID's rather than relying on aggro, this modified profile pulls him.

Edit: updated, wowhead lied, "Marsh Gulper" does not reward rep

View attachment Saberstalkers rep.xml
 
Last edited:
First of all thank you for this profile,and sorry for my english.I tried with my 680 fury warrior and died almost every single fight now i changed to gladiator 676 ilvl works great for 25 mins.İm gonna ask will you update for repair's or profile includes repairs ? Thanks again


Edit:After 2-3 hours bot goes to vendor and trys to sell items but there is nothing to sell he just stands still there an waitView attachment 2088 2015-08-23 03.30.txt
 
Last edited:
kittenkicker said:
tested on 690 bm hunter running tuahna premium. my only issue is it tends not to engage when it mounts up, it will run from hotspot to hotspot pulling mobs till it gets dismounted and then it will fight. if moving from one hotspot to the next is close enough that it doesn't have to mount it pulls the new mobs normally. just a good thing that my hunter can comfortably handle 6 or so of them at once lol
Click to expand...

My guess is you need to go into "Settings & Tools" on Honorbuddy and check the option "Kill between Hotspots".
 
This profile worked amazing using GB2. I have a 693 Hunter and went from Friendly through half Exalted in 3 hours. It does grab some big pulls at time, but I had no deaths. Also got 32 Greens and 1200 claws. Made over 2k Gold
 
Great profile

For any non-prot warriors out there with survivability problems I suggest running with Second Wind and Shockwave. With tuanhas routine and these talents its pretty hard to die even when 3+ mobs get pulled because the more mobs there are the more healing you get when below 35% :)

With this setup I barely ever died on my 675 war :)

Cheers for the profile!
 
You must log in or register to reply here.
Back
Top