What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

not running mesh

ryftobuddy

ryftobuddy

New Member
Joined
Aug 19, 2011
Messages
2,291
Reaction score
34
Hey again,

was able to get it attached and working now, loaded up the scarwood profile in the forums here click start, says it loads mesh and profile and then..

Nothing...This is with the warrior profile, same spec shown in the how to bot section, all buttons on the bar (not sure what needs to be done with all the abilities btw). Says the bot is starting and then just stands there.

Any ideas?

btw, some more how-to's would be great. Such as what abilities should we put onto our bars, do our keys need to be setup a certain way, do pots/drinks need to be added to the bars, do we need to have target of target, click to move, any other settings done?

I completely understand that we are early adopters, but having this info would help a lot
 
well it seam like u need to have the exact souls as posted in your class. when i change mine it does nothing but stand there. but when i "load" the right souls it starts. of running and killing stuff.
 
There should be a log file in the Logs subfolder of Ryftomate. Can you upload that file?
 
[00:33:31.469 N] Initializing
[00:33:31.475 N] Initialization done
[00:33:31.520 N] Loaded settings for Phazex
[00:33:31.671 N] Loaded routine 'Giga.Rift.Warrior'
[00:33:38.437 N] Loading Scarwood 29-36
[00:33:38.493 N] Successfully loaded Scarwood 29-36
[00:33:40.399 N] Successfully loaded mesh 'Scarwood'
[00:34:56.967 N] Loading Scarwood 29-36
[00:34:56.971 N] Successfully loaded Scarwood 29-36
[00:35:04.441 N] Successfully loaded mesh 'Scarwood'
[00:35:16.752 N] Successfully loaded mesh 'Scarwood'
[00:35:38.262 N] Successfully loaded mesh 'Scarwood'

that's all that's in the log, want me to change the format to debug or anything?
 
phaze said:
btw, some more how-to's would be great. Such as what abilities should we put onto our bars, do our keys need to be setup a certain way, do pots/drinks need to be added to the bars, do we need to have target of target, click to move, any other settings done?

I completely understand that we are early adopters, but having this info would help a lot
Click to expand...

You don't have to arrange your bars at all; Ryftomate uses spells for you automatically.
There are also very few settings - Ryftomate is supposed to work with very little setup. Just load a profile, select a routine and hit go, and it should be on its way!
phaze said:
[00:33:31.469 N] Initializing
[00:33:31.475 N] Initialization done
[00:33:31.520 N] Loaded settings for Phazex
[00:33:31.671 N] Loaded routine 'Giga.Rift.Warrior'
[00:33:38.437 N] Loading Scarwood 29-36
[00:33:38.493 N] Successfully loaded Scarwood 29-36
[00:33:40.399 N] Successfully loaded mesh 'Scarwood'
[00:34:56.967 N] Loading Scarwood 29-36
[00:34:56.971 N] Successfully loaded Scarwood 29-36
[00:35:04.441 N] Successfully loaded mesh 'Scarwood'
[00:35:16.752 N] Successfully loaded mesh 'Scarwood'
[00:35:38.262 N] Successfully loaded mesh 'Scarwood'

that's all that's in the log, want me to change the format to debug or anything?
Click to expand...

What level is your character?
 
Can you open the mesher, load the mesh, tick the 'Render' box and verify you see green circles around the terrain?
 
Sorry, blue was what I meant. I assume you are a warrior? :P
 
yeah, warrior using warrior profile. Same souls shown in the how-to, with my points spent in the order given in the how-to (just less than level 50 of course). Went and made sure I had all my abilities trained to max as well. Still no-go
 
do I need to put the profiles into any specific location maybe? I just unzipped the files directly to the folder where the exe is
 
phaze said:
do I need to put the profiles into any specific location maybe? I just unzipped the files directly to the folder where the exe is
Click to expand...

No you dont. The mesh and the profile needs to be in the folder, and then you load the profile and press start.
 
ok, yeah.

That's how I have it, still just standing there after I start the profile.

Becoming a sad panda :(
 
Can you upload the log file? You can find it in the 'Logs' subdirectory of Ryftomate. There really should be more in the logs than what you posted - did you copy it from the bot, or from the text file?
 
phaze said:
ok, yeah.

That's how I have it, still just standing there after I start the profile.

Becoming a sad panda :(
Click to expand...

Try turning on Click to Move, it's located in "Settings->Interface->Misc" at the bottom
 
Same thing with click to move turned on. Loads profile, loads mesh and then just stands there.
 
Can you upload the log file? You can find it in the 'Logs' subdirectory of Ryftomate.
 
[01:38:55.140 N] Loaded settings for Phazex
[01:38:55.140 N] Initializing
[01:38:55.146 N] Initialization done
[01:38:55.179 N] Loaded routine 'Giga.Rift.Warrior'
[01:38:59.857 N] Loading Scarwood 29-36
[01:38:59.917 N] Successfully loaded Scarwood 29-36
[01:39:01.900 N] Successfully loaded mesh 'Scarwood'
[01:40:18.413 N] Successfully loaded mesh 'Scarwood'


that's all the latest log contains, never does anything after the mesh is loaded
 
Can you please also try this modified version of the profile that I have attached?
 

Attachments

You must log in or register to reply here.
Back
Top