What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Helltooth Pet Trinity help .

jensenbeach772

jensenbeach772

Member
Joined
May 7, 2014
Messages
414
Reaction score
1
i was wondering if anyone can take pictures of there trinity set up would help me out alot :)
 
there is no profile or something like that....

trinity has to be fixed and updated as a whole to make helltooth work.

the great season 5 support has fallen down to absolute zero support, not even one wd build is working actualy :(.

I would kinda donate or pay a month for it , if someone would fix that.
 
What kind of builds are you looking for and at what difficulty. I am working on my endgame stuff but as of right now I run the Zuni with a pet build and it seems to work fine at T4/GR20. I really haven't pushed it beyond those difficulties.
 
I am currently using DB running T10/GR75 with Para level 1423 and using this build: http://www.diablofans.com/builds/79213-2-4-1-helltooth-garg-meta-solo-gr90

Getting about 90-100b/hour with NF+GF mix mode.

Using the lastest version of Trinity (2.41.41), and make sure use the following settings for Trinity :
1. In Combat -- Misc -- Trash Mob Settings - Ignore Trash further away than -- 5.0 (this wil temp fix the Soul Harvest problem, will keep 10 stacks of Soul Harvest which provide you enough toughness for face-tanking the mobs)
2. Uncheck "Extended trash-kill range after combat"
3. In Avoidance -- Ground Effect -- Select All
4. In Avoidance -- Advanced -- Measurement Radius -- 30.0

Just in case if I missed some settings above, I put my current Trinity setting profile in attachment. Put this to Db\Settings\Saved\ and then use the Import button in Trinity bottom left of main window.
View attachment Helltooth Solo.xml

Hopefully this can help you :)
 
Last edited:
I get:

Failed to load profile: Helltooth Solo (9).xml unable to identify correct bot
Failed to load profile: Unable to load profile
System.Exception: Unable to load profile
à Zeta.Bot.ProfileManager.Load(String profilePath, Boolean rememberPath)

Any idea what this is? (New to DB)

I have trinity 2.41.42, Adventurer 1.3.4.27

Thanks
 
Vini666 said:
I get:

Failed to load profile: Helltooth Solo (9).xml unable to identify correct bot
Failed to load profile: Unable to load profile
System.Exception: Unable to load profile
à Zeta.Bot.ProfileManager.Load(String profilePath, Boolean rememberPath)

Any idea what this is? (New to DB)

I have trinity 2.41.42, Adventurer 1.3.4.27

Thanks
Click to expand...
Im no expert in DB, but if I were you i will:
1. Use a fresh installed DB folder
2. Download newest Trinity and Adventurer
3. Completely delete old Trinty and Adventurer plugin folder and then copy the new version (Just dont copy the new version of trinity on top of an older version)
4. Run DB and game as admin.
5. Only enable Trinity and Adventurer if you wanna run Adventurer profiles only
6. Helltooth Solo.xml is my Trinity setting profile for WD only. Put it in Db\Settings\Saved\ and then switch to DB -- Triniry -- Config -- use the Import button in bottom left of main Triniry config window -- press Save

All Done! Hopefully this will fix your problem!
 
Misaka10086 said:
Im no expert in DB, but if I were you i will:
1. Use a fresh installed DB folder
2. Download newest Trinity and Adventurer
3. Completely delete old Trinty and Adventurer plugin folder and then copy the new version (Just dont copy the new version of trinity on top of an older version)
4. Run DB and game as admin.
5. Only enable Trinity and Adventurer if you wanna run Adventurer profiles only
6. Helltooth Solo.xml is my Trinity setting profile for WD only. Put it in Db\Settings\Saved\ and then switch to DB -- Triniry -- Config -- use the Import button in bottom left of main Triniry config window -- press Save

All Done! Hopefully this will fix your problem!
Click to expand...

Worked! I was on the main page when trying to import the build..
Thanks
 
Hi guys,

I was just wondering if anyone had managed to fix the issue with trinity summoning gargantuan's?

Mine won't summon them at all.

Thanks
 
Oscarfury said:
Hi guys,

I was just wondering if anyone had managed to fix the issue with trinity summoning gargantuan's?

Mine won't summon them at all.

Thanks
Click to expand...

I have the issue of trinity resummoning pets on cooldown. Failing this it will resummon them before every elite.
 
vitamins said:
I have the issue of trinity resummoning pets on cooldown. Failing this it will resummon them before every elite.
Click to expand...
This is my only issue, summoning garg and dogs off cooldown. Luckily I'm able to do gr70 without dying or else you'd be in a continuous death loop since everything will be on cooldown when you resurrect.
 
Misaka10086 said:
I am currently using DB running T10/GR75 with Para level 1423 and using this build: http://www.diablofans.com/builds/79213-2-4-1-helltooth-garg-meta-solo-gr90

Getting about 90-100b/hour with NF+GF mix mode.

Using the lastest version of Trinity (2.41.41), and make sure use the following settings for Trinity :
1. In Combat -- Misc -- Trash Mob Settings - Ignore Trash further away than -- 5.0 (this wil temp fix the Soul Harvest problem, will keep 10 stacks of Soul Harvest which provide you enough toughness for face-tanking the mobs)
2. Uncheck "Extended trash-kill range after combat"
3. In Avoidance -- Ground Effect -- Select All
4. In Avoidance -- Advanced -- Measurement Radius -- 30.0

Just in case if I missed some settings above, I put my current Trinity setting profile in attachment. Put this to Db\Settings\Saved\ and then use the Import button in Trinity bottom left of main window.
View attachment 201882

Hopefully this can help you :)
Click to expand...

Thanks for these tips, im still gearing up my WD but they helped alot - however I find that the WD still enjoys losing stacks of SH when he enguages some elites because the system does not prioritise keep stacks @ 10 over ground effects.
 
Misaka10086 said:
I am currently using DB running T10/GR75 with Para level 1423 and using this build: http://www.diablofans.com/builds/79213-2-4-1-helltooth-garg-meta-solo-gr90

Getting about 90-100b/hour with NF+GF mix mode.

Using the lastest version of Trinity (2.41.41), and make sure use the following settings for Trinity :
1. In Combat -- Misc -- Trash Mob Settings - Ignore Trash further away than -- 5.0 (this wil temp fix the Soul Harvest problem, will keep 10 stacks of Soul Harvest which provide you enough toughness for face-tanking the mobs)
2. Uncheck "Extended trash-kill range after combat"
3. In Avoidance -- Ground Effect -- Select All
4. In Avoidance -- Advanced -- Measurement Radius -- 30.0

Just in case if I missed some settings above, I put my current Trinity setting profile in attachment. Put this to Db\Settings\Saved\ and then use the Import button in Trinity bottom left of main window.
View attachment 201882

Hopefully this can help you :)
Click to expand...

This helped a TON! Thanks for taking the time!
 
maybe i am to dumb, but how to import the files?
i copyed the file to the right folder , but i cant find the import button :(
 
Misaka10086 said:
I am currently using DB running T10/GR75 with Para level 1423 and using this build: http://www.diablofans.com/builds/79213-2-4-1-helltooth-garg-meta-solo-gr90

Getting about 90-100b/hour with NF+GF mix mode.

Using the lastest version of Trinity (2.41.41), and make sure use the following settings for Trinity :
1. In Combat -- Misc -- Trash Mob Settings - Ignore Trash further away than -- 5.0 (this wil temp fix the Soul Harvest problem, will keep 10 stacks of Soul Harvest which provide you enough toughness for face-tanking the mobs)
2. Uncheck "Extended trash-kill range after combat"
3. In Avoidance -- Ground Effect -- Select All
4. In Avoidance -- Advanced -- Measurement Radius -- 30.0

Just in case if I missed some settings above, I put my current Trinity setting profile in attachment. Put this to Db\Settings\Saved\ and then use the Import button in Trinity bottom left of main window.
View attachment 201882

Hopefully this can help you :)
Click to expand...


thx for the profile, works perfect

Dentist3 said:
maybe i am to dumb, but how to import the files?
i copyed the file to the right folder , but i cant find the import button :(
Click to expand...

update your trinity files. you will find export/import options in trinity section, bottom side.
 
how do you get the bot to cast wall of the dead and phiranas on cooldown on mobs? I watched the bot fight an elite for a long time and not cast it. 20-30 seconds at GR75.
 
You must log in or register to reply here.
Back
Top