What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[Hce]Blackrock Ore - True Iron Ore - Frostfire Ridge [Mining/Horde]

HceTiG0L

HceTiG0L

Community Developer
Joined
Feb 10, 2012
Messages
435
[Hce]Blackrock Ore - True Iron Ore - Frostfire Ridge [Mining/Horde]​


Botbase: Gatherbuddy 2
Mailbox: Horde only
Vendor: Horde only
Faction: Horde. Alliance untested, I doubt they can use this profile.
Time to complete route: V0.1: Around 28 to 32 minutes. V0.2 Around 23 to 27 minutes
Start: Garrison / Frostfire Ridge
Zone: Frostfire Ridge
Tested: Around 7 hours
AFK: After adding 15+ blackspots this has been working excellent without any stucks/deaths for me. (Horde - Holy paladin)
Optimized for: Mining
Mount type: Ground

Additional information:
To change mail setting: Open profile and go to line 14. Change the setting(s) to True or False, what you prefer.
To change vendor setting: Open profile and go to line 21. Change the setting(s) to True or False, what you prefer.
Disable "Kill between hotspots" into Settings & Tools.
I like to "Enable loot mobs" since mining some ores they spawn a mob that drops additional Ores.

Route we farming (Red circles are not in profile):


Results while testing this profile for around +- 3 hours:
253x True Iron Ore
275x Blackrock Ore
151x Draenic Stone
25x Primal Spirit




EDIT:
File can now be downloaded without using the store, see attachment.
 

Attachments

Last edited:
Thread updated and V0.1 uploaded. Looking forward to see how it is working out for you guys.
This has been optimized for mining only. If you find any stucks please tell me the cords so I can update the profile. Have fun!
 
Any stucks, feedback guys?
I'm currently rewriting some of the profile so it shouldn't enter 2 caves since we cannot mine those ores or stucks. This should make the profile a bit faster and hopefully more nph.

So if you have found any stucks, please let me know so I can blackspot those also in V0.2. I hope releasing V0.2 later this night once I removed the 2 caves and did a few test runs.
 
Okay guys V0.2 has been uploaded. This will avoid entering the two caves which will make the profile around 5 minutes faster and gather more NPH.

Let me know if your having trouble. Would love to see some other results from you guys :)
 
The ores and herbs will zone out around garrison. Maybe you can add that area as a blackspot? I tried your profile but it just stayed around garrison pathing back and forth.

Thanks for making a profile tho :)
 
tia1979 said:
The ores and herbs will zone out around garrison. Maybe you can add that area as a blackspot? I tried your profile but it just stayed around garrison pathing back and forth.

Thanks for making a profile tho :)
Click to expand...

Hmm, did you start it inside Garrison or outside ? I tried starting it inside Garrison and it worked, it went outside and headed to the path it should be doing.
Anyway, try starting it a little bit outside your Garrison and see if that is working, let me know how it goes! :)

EDIT: I started the profile in front of my Garrison mine to test, it is going outside garrison and starts the profile. Normaly Gatherbuddy automaticly skips nodes in caves. If your still having problems, please post your log. :).
 
Last edited:
Garrison needs to be blackspotted, ores keep phasing so it makes the bot go back and forth. Cave at cord 50, 35. Bot keeps going to the entrance and runs away again back and forth. Lava river at 65, 17 needs to be blacklisted. I forgot to get the cords for the spot but its a long cliff where the node is on the edge and the bot tries to go around to get it but gets outta range and goes back and then sees it again and repeats. I'll post the coords when I try it again.
 
Jamesszz said:
Garrison needs to be blackspotted, ores keep phasing so it makes the bot go back and forth. Cave at cord 50, 35. Bot keeps going to the entrance and runs away again back and forth. Lava river at 65, 17 needs to be blacklisted. I forgot to get the cords for the spot but its a long cliff where the node is on the edge and the bot tries to go around to get it but gets outta range and goes back and then sees it again and repeats. I'll post the coords when I try it again.
Click to expand...
These should all be fixed now in V0.3 which is uploaded now.

If you guys find any stucks/blackspots, let me know so I can fix them!
 
Herb node right at edge of garrison is still causing it to go back and forth. Coords 47 61.
 
Cave at 43 21 gives me alot of problems, goes down into it and keeps running back and forth trying to get a herb node.
 
Jamesszz said:
What do you have your loot radius set to for this?
Click to expand...
I have my loot radius set on 45.

Jamesszz said:
Herb node right at edge of garrison is still causing it to go back and forth. Coords 47 61.
Click to expand...
Can you give me the message from inside your honorbuddy. This would be something like this "[01:21:00.534 N] [Gatherbuddy2]: Approaching "Fel Iron Deposit" at X="2093.734" Y="6169.36" Z="148.521" " (as example), I have no herbalism, not yet, so I cannot see which herb exactly is causing you problems. I did check the cords, but I could not see any herb over there.

Jamesszz said:
Cave at 43 21 gives me alot of problems, goes down into it and keeps running back and forth trying to get a herb node.
Click to expand...
I checked the location, you are talking about a cave, but when I went to those cords, I ended up with a lava pool ? Please tell me as above, which one he is trying to approach with the XYZ cords. :)

If you can give me those cords, I can update the profile once again and hopefully fix this. :)

Thanks for the feedback!
 
Constantly runs back and forth in the ogre camp under Bladespire fortress. Even when I manually ran off and farmed some nodes it came right back and just paths back and forth :(

[Gatherbuddy2]: Approaching "Blackrock Deposit" at X="6724.916" Y="5913.661" Z="127.7061"
 
Jamesszz said:
Cave at 43 21 gives me alot of problems, goes down into it and keeps running back and forth trying to get a herb node.
Click to expand...

Same here.

Its about this target:

[Gatherbuddy2]: Approaching "True Iron Deposit" at X="7021.172" Y="4585.314" Z="116.9201"
[Gatherbuddy2]: Approaching "True Iron Deposit" at X="7021.172" Y="4585.314" Z="116.9201"

My blackspots so far:

<Blackspots>
<Blackspot X="6975.663" Y="4564.91" Z="67.89842" Radius="200.09324"/>
<Blackspot X="5774.551" Y="4630.912" Z="72.94872" Radius="20.09324"/>
<Blackspot X="6524.98" Y="5875.149" Z="130.6292" Radius="20.09324"/>
<Blackspot X="7350.136" Y="6161.693" Z="131.2531" Radius="20.09324"/>
<Blackspot X="5586.25" Y="6393.17" Z="126.2138" Radius="20.09324"/>
<Blackspot X="6612.236" Y="5808.017" Z="155.876" Radius="20.09324"/>
<Blackspot X="6736.038" Y="6009.372" Z="129.0875" Radius="20.09324"/>
<Blackspot X="7139.335" Y="5217.101" Z="132.6334" Radius="20.09324"/>
<Blackspot X="6817.217" Y="4410.932" Z="69.33795" Radius="20.09324"/>
<Blackspot X="7463.971" Y="4472.45" Z="167.1846" Radius="20.09324"/>
</Blackspots>

Otherwise my toon is going crazy...
 
Last edited:
zakkwylde said:
Constantly runs back and forth in the ogre camp under Bladespire fortress. Even when I manually ran off and farmed some nodes it came right back and just paths back and forth :(

[Gatherbuddy2]: Approaching "Blackrock Deposit" at X="6724.916" Y="5913.661" Z="127.7061"
Click to expand...
prometheus247 said:
Same here.

Its about this target:

[Gatherbuddy2]: Approaching "True Iron Deposit" at X="7021.172" Y="4585.314" Z="116.9201"
[Gatherbuddy2]: Approaching "True Iron Deposit" at X="7021.172" Y="4585.314" Z="116.9201"

My blackspots so far:

<Blackspots>
<Blackspot X="6975.663" Y="4564.91" Z="67.89842" Radius="200.09324"/>
<Blackspot X="5774.551" Y="4630.912" Z="72.94872" Radius="20.09324"/>
<Blackspot X="6524.98" Y="5875.149" Z="130.6292" Radius="20.09324"/>
<Blackspot X="7350.136" Y="6161.693" Z="131.2531" Radius="20.09324"/>
<Blackspot X="5586.25" Y="6393.17" Z="126.2138" Radius="20.09324"/>
<Blackspot X="6612.236" Y="5808.017" Z="155.876" Radius="20.09324"/>
<Blackspot X="6736.038" Y="6009.372" Z="129.0875" Radius="20.09324"/>
<Blackspot X="7139.335" Y="5217.101" Z="132.6334" Radius="20.09324"/>
<Blackspot X="6817.217" Y="4410.932" Z="69.33795" Radius="20.09324"/>
<Blackspot X="7463.971" Y="4472.45" Z="167.1846" Radius="20.09324"/>
</Blackspots>

Otherwise my toon is going crazy...
Click to expand...

Thanks for the feedback both.
All blackspots added into V0.4. Please let me know if you find any other stucks/blackspots.
 
More Blackspots. Its the list I gave you before, but extended.

<Blackspots>
<Blackspot X="6975.663" Y="4564.91" Z="67.89842" Radius="200.09324"/>
<Blackspot X="5774.551" Y="4630.912" Z="72.94872" Radius="20.09324"/>
<Blackspot X="6524.98" Y="5875.149" Z="130.6292" Radius="20.09324"/>
<Blackspot X="7350.136" Y="6161.693" Z="131.2531" Radius="20.09324"/>
<Blackspot X="5586.25" Y="6393.17" Z="126.2138" Radius="20.09324"/>
<Blackspot X="6612.236" Y="5808.017" Z="155.876" Radius="10.09324"/>
<Blackspot X="6736.038" Y="6009.372" Z="129.0875" Radius="10.09324"/>
<Blackspot X="7139.335" Y="5217.101" Z="132.6334" Radius="10.09324"/>
<Blackspot X="6817.217" Y="4410.932" Z="69.33795" Radius="10.09324"/>
<Blackspot X="7463.971" Y="4472.45" Z="167.1846" Radius="10.09324"/>
<Blackspot X="7181.838" Y="5738.307" Z="122.7419" Radius="10.09324"/>
<Blackspot X="7122.718" Y="4920.784" Z="131.7528" Radius="10.09324"/>
<Blackspot X="5933.62" Y="4720.751" Z="127.6903" Radius="10.09324"/>
<Blackspot X="6716.648" Y="5998.142" Z="130.8325" Radius="10.09324"/>
<Blackspot X="7232.452" Y="5789.01" Z="133.6139" Radius="10.09324"/>
<Blackspot X="7282.242" Y="3805.939" Z="97.01258" Radius="10.09324"/>
<Blackspot X="5385.289" Y="3864.955" Z="118.7066" Radius="10.09324"/>
<Blackspot X="5725.424" Y="4010.253" Z="119.9558" Radius="10.09324"/>
<Blackspot X="5906.338" Y="4998.002" Z="136.7919" Radius="10.09324"/>
</Blackspots>
 
cody1d said:
Would you possibly be adding an Alliance version in the future or nah?
Click to expand...

This is something I do not have planned atm. Are you talking about Frostfire Ridge for Alliance or other zones ?
Did you try running this profile on an Alliance character?
 
You must log in or register to reply here.
Back
Top