[PAID] [GB2][N] Patto92's MoP Multi-Zone V3

[patto92]

BUY / TRIAL HERE!!:3

Video!

[video=youtube;pmIV63VcxoU]https://www.youtube.com/watch?v=pmIV63VcxoU[/video]
https://www.facebook.com/pages/Patto92/1398950096992382
Search patto92 HB on youtube


Hi guys Patto92 here Again.

After a long time of developing profiles, I've decided to release my absolute best money makers to the public!

In the video above, it shows a complete 1 hour run with 235 NPH, all zones and that's without foragers gloves!

Here are some other stats I've had from the profile.



[Gatherbuddy2]: Gatherbuddy has been running for 1h 47m 45s. Collected a total of 508 nodes.
[Gatherbuddy2]: Ghost Iron Deposit: 160
[Gatherbuddy2]: Silkweed: 84
[Gatherbuddy2]: Green Tea Leaf: 158
[Gatherbuddy2]: Rain Poppy: 27
[Gatherbuddy2]: Rich Ghost Iron Deposit: 18
[Gatherbuddy2]: Sha-Touched Herb: 3
[Gatherbuddy2]: Golden Lotus: 3
[Gatherbuddy2]: Trillium Vein: 10
[Gatherbuddy2]: Snow Lily: 45


If you'd like to give this profile a Trail or buy, follow this link!
BUY / TRIAL HERE!!:3​

 

[alexflex]

how should I configure the bot?

it is not working for me

[Gatherbuddy2]: Approaching "Ghost Iron Deposit" at X="2029.427" Y="-1205.58" Z="352.5547"
[Gatherbuddy2]: Approaching "Ghost Iron Deposit" at X="2029.427" Y="-1205.58" Z="352.5547"
[Gatherbuddy2]: Approaching "Ghost Iron Deposit" at X="2029.427" Y="-1205.58" Z="352.5547"
Stopping the bot!

but in every gathering profiles

 

[patto92]

how should I configure the bot?

it is not working for me

[Gatherbuddy2]: Approaching "Ghost Iron Deposit" at X="2029.427" Y="-1205.58" Z="352.5547"
[Gatherbuddy2]: Approaching "Ghost Iron Deposit" at X="2029.427" Y="-1205.58" Z="352.5547"
[Gatherbuddy2]: Approaching "Ghost Iron Deposit" at X="2029.427" Y="-1205.58" Z="352.5547"
Stopping the bot!

but in every gathering profiles

Could you please post a log, I can't see what is causing the issue by the short amount you linked me

https://www.thebuddyforum.com/honorbuddy-forum/honorbuddy-guides/35945-guide-attach-log-kick.html

 

[alexflex]

okk, this is the log, sorry my english

 

[patto92]

Hi there Alex, so, after reading the logs it looks like you are getting stuck.. on a lot of things and I don't know why, could be an HB issue as no one else has reported it on my profile. so what I want you to do, is do a complete fresh install for me a guide is here on how to do it! [video=youtube;Dd7tfJMq1Tk]https://www.youtube.com/watch?v=Dd7tfJMq1Tk[/video] let me know how it goes and report back thanks!

Patto92

 

[alexflex]

Good evening, it's working perfectly now, rebooted several times the profile, and it worked ...

I saw the video to reinstall, and I think you forgot to remove your nick in the game ....

But thanks for the help!
I will soon collaborate more profiles!
Thank you

obs.
is a nice and best profile i have used! thanks for that gath and nice sup!

sorry my bad english

 

[patto92]

Good evening, it's working perfectly now, rebooted several times the profile, and it worked ...

I saw the video to reinstall, and I think you forgot to remove your nick in the game ....

But thanks for the help!
I will soon collaborate more profiles!
Thank you

obs.
is a nice and best profile i have used! thanks for that gath and nice sup!

sorry my bad english

Anytime mate! glad we could get it working so well and I edited my name out of the video! thanks for pointing it out :3

 

[ercoleman]

i have problems with the profile: the pg just fly around the nodes and cant reach them

 

[ercoleman]

i have problems with the profile: the pg just fly around the nodes and cant reach them

problem solved, i did a new install of HB

 

[BluBot]

First of all I just want to say this is an amazing profile for gathering in MoP.

In the past I used a few free profiles and this paid profile is just amazing.

I just did a quick test on mining and this is what I found:

1) The new HB update might have broken something because the bot would just strafe left and right instead of mine. A fresh clean install fixed this problem.
2) When flying I chose a different mount than the one I selected in the profile and your routine was able to tell the difference by switching to the correct mount after mining one ore node.
3) I dismounted in mid-flight to see what would happen. Your routine consistently attempted to summon the correct mount while falling. I activated slow fall and the correct mount was selected after I touched ground.
4) I dismounted again in mid-flight, but close to a mining node. The bot ran over to the node instead of mounting, which I believe is the correct behavior.
5) I tried this profile in other zones such as Northrend, Burning Crusade, and Vanilla because I had the choice to collect other mining nodes. This profile performs the best in MoP and not as well in other zones. Also this profile works well when you start outside instead of inside. I tried started the profile inside Ironforge and my bot mounted and flew in circles against the ceiling. When I start my bot in Stormwind by the mage tower the bot wants to fly north to Ironforge. Is there a way to randomize where to fly? Maybe south toward Booty Bay?

Let me know if you want the log and I will PM it to you. Also is there a way to blow my cool downs on MoP mobs only and not on Vanilla mobs? I look silly blowing cool downs on a level 20 mob. For now I selected FALSE for cool downs.

So far this is my favorite profile for gathering in MoP.

 

[BluBot]

I just did another quick test.
I found a place in Pandaria where the mining nodes are underground.
MoP Multi-Zone V3 recognized quickly (maybe 2 to 3 seconds) that there's no way to these nodes and just moved on.
The more I test this profile the more I like it.

 

[patto92]

First of all I just want to say this is an amazing profile for gathering in MoP.

In the past I used a few free profiles and this paid profile is just amazing.

I just did a quick test on mining and this is what I found:

1) The new HB update might have broken something because the bot would just strafe left and right instead of mine. A fresh clean install fixed this problem.
2) When flying I chose a different mount than the one I selected in the profile and your routine was able to tell the difference by switching to the correct mount after mining one ore node.
3) I dismounted in mid-flight to see what would happen. Your routine consistently attempted to summon the correct mount while falling. I activated slow fall and the correct mount was selected after I touched ground.
4) I dismounted again in mid-flight, but close to a mining node. The bot ran over to the node instead of mounting, which I believe is the correct behavior.
5) I tried this profile in other zones such as Northrend, Burning Crusade, and Vanilla because I had the choice to collect other mining nodes. This profile performs the best in MoP and not as well in other zones. Also this profile works well when you start outside instead of inside. I tried started the profile inside Ironforge and my bot mounted and flew in circles against the ceiling. When I start my bot in Stormwind by the mage tower the bot wants to fly north to Ironforge. Is there a way to randomize where to fly? Maybe south toward Booty Bay?

Let me know if you want the log and I will PM it to you. Also is there a way to blow my cool downs on MoP mobs only and not on Vanilla mobs? I look silly blowing cool downs on a level 20 mob. For now I selected FALSE for cool downs.

So far this is my favorite profile for gathering in MoP.

hi Hawke I'm so glad you like this profile! Currently it will only work in pandaria this is why it won't fly very well anywhere else. If the interest is there I can make multizones for other continents too if you have any issues let me know!

<3 patto92

 

[chon79]

Patto will this bot still mine ore effectively if i turn off herbal? Or would you recommend I use your Jade Forest profile for that?

 

[patto92]

Patto will this bot still mine ore effectively if i turn off herbal? Or would you recommend I use your Jade Forest profile for that?

This profile will do Ore pretty well Might be a slightly lower NPH then the Jade forest one, but the jade forest is only one zone, so I wouldn't recommend it for long farms for safety reasons my best Multizone for ore though is Buddy Store by far as it was made specifically for safety and max NPH ore farming

 

[xyzq8]

hello, does this profile works for lvling mining/herb or just for farming? because am looking for a good paid mining/herb or any other lvling professions working profiles i dont mind if i have to pay for them as i think the devs deserve it for the time they put into making them. sorry if am posting in the wrong thread .

 

[patto92]

hello, does this profile works for lvling mining/herb or just for farming? because am looking for a good paid mining/herb or any other lvling professions working profiles i dont mind if i have to pay for them as i think the devs deserve it for the time they put into making them. sorry if am posting in the wrong thread .

Hi xyzq8 yes you can use this while leveling your professions, you will just have to manually train them. I'd suggest using the free 1-600 profile in profession buddy to do it automatically then use this profile :3 just easier for you ).

Take care <3

 

[Vulture051]

£2.99 premium version

 

[patto92]

I've been selling my profiles for ages. This profile is just as good as my free. Just a lot safer as 50 vs 20000 people use it.

You are welcome to buy it or use my free I give just as much support to both.

I do how ever appreciate people buying my work as I have put many many hours into it all.. It helps me pay the stupidly high electricity bills in Australia xD

 

[Crzyballr]

G'day Patto ! Fellow strayan here moite . I got 2 of your profiles from the buddy store (paid) but every time I dc (optus sigh) I have to re-load them and HBRELOG doesnt really support that. Any work-arounds?

 

[patto92]

G'day Patto ! Fellow strayan here moite . I got 2 of your profiles from the buddy store (paid) but every time I dc (optus sigh) I have to re-load them and HBRELOG doesnt really support that. Any work-arounds?

I don't have a work around for re log atm. I know hoghvoltz is working on it though PM me your email and I can help you out for now though when I'm on my computer next