Dreadfang Venom Sac Farm

[Zeewolf]

This is to restore you back to neutral with the Aldor should you have chosen the Scyers, not so useful nowadays unless you want to pickup the FoS Hero of Shattrath

With a lvl 12 guild you gain 10% XP, and if you have Banner of Cooperation you can gain an additional 5% while its up.

Based on that you need
1176 venom sacs @ 15%
1224 @ 10%
1334 @ 0%

Make a macro: "#showtooltip Dreadfang Venom Sac" and put it on your bar to keep track of how many you have.

Once back to neutral you will need Mark of Kil'jaeden x180 to get to honored, then Mark of Sargeras/Fel Armament up to exalted, id recommend using the AH to get these rather than farming. Should not take long to get enough and your farm time is better spent herbing/mining to buy them than to actually farm them

Tested this on my rogue and used to grind from 63-68, also tried it on my 85 balance druid. Have to say it appeared more natural on a melee class. Plenty of hotspots from the area outside Allerian Stronghold down to the south end of the map

Load grind bot and the profile and head to terokkar and click start, make sure loot mobs is enabled in bot settings and kill between hotspots in general settings

A horde vendor/mailbox is included but personally id recommend getting an addon like auto destroy to manage the crap loots so it can grind with less interuption, id also recommend LetMeFly if you have lifetime and a flying mount

 

[Makelio]

help

it dont move after this hot spot

 

[Makelio]

bamp for anyone that can help me here!

 

[Zeewolf]

i edited the route in the original profile with apocs profile editor and threw in a few extra hotspots to make it not run into the area with the treeants/skeletons while moving between top and bottom since it was wasting time on killing those

however those hotspots had no Z value on them and a few were in places that were causing occasional issues. i made a few tweaks since posting it and the attached is the tweaked version

ive now completed the grind so probably wont be amending it further

 

[Omaha303]

Using the last version, the issue mentioned by Makelio still happening. Aside from that, the profile works good but i have to keep an eye on it to stop/start HB.

 

[fotosammler]

cant get this one working:

I get errors in debug:

[13:25:13:345] System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.SleepInternal(Int32 millisecondsTimeout)
   at System.Threading.Thread.Sleep(Int32 millisecondsTimeout)
   at Styx.Logic.BehaviorTree.TreeRoot.Tick()
   at Styx.Logic.BehaviorTree.TreeRoot.Run()
[13:25:13:345] System.Threading.ThreadAbortException: Thread was being aborted.
   at Styx.Logic.BehaviorTree.TreeRoot.Run()
[13:25:14:021] System.Net.Sockets.SocketException: Es konnte keine Verbindung hergestellt werden, da der Zielcomputer die Verbindung verweigerte 127.0.0.1:1337

Server stack trace: 
   bei System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   bei System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   bei System.Runtime.Remoting.Channels.RemoteConnection.CreateNewSocket(EndPoint ipEndPoint)
   bei System.Runtime.Remoting.Channels.RemoteConnection.CreateNewSocket()
   bei System.Runtime.Remoting.Channels.RemoteConnection.GetSocket()
   bei System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machinePortAndSid, Boolean openNew)
   bei System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream)
   bei System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   bei System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)

Exception rethrown at [0]: 
   bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   bei HBRemoting.BotMessage.GetMessage()
   bei PartyBot.IPC.RemotingClient.Update()

and in Navigation

[13:25:13:270] Error reading file data #2: Length of the data to decrypt is invalid.
[13:25:13:270] Could not generate path from {-2799.871, 4402.988, -4.615726} to {-3545.953, 4173.983, -2.43961} (time used: 0 milliseconds) @ FindStartPoly

Can anyone help please?

 

[Kickazz006]

@fotosammler - re-link your mesh folder to your old folder

 

[fotosammler]

i ve just made a new Meshes folder, but still get the same errors. I?ve no idea. btw, i use Grind bot. i`m alliance warri.

DONE. reinstalled HB.

 

[Sastres]

Thanks for the profile.
I took it upon myself to edit it.
I'm the player of the Alliance, and on this profile ran to sell items from handbags to horde)) Guard killed me 7 times before I noticed.
properly inserted

<MaximumHotspotTime> 10 000 </ MaximumHotspotTime>

and amended:

<Vendor Name="Cecil Meyers" Entry="19056" Type="Repair" X="-2978.951" Y="4033.115" Z="3.574525" />

and put false in everything except the sale of gray

View attachment Dreadfang Spiders.xml

 

[mspropst]

Any way you also happened to make a Dampscale Basilisk profile?

 

[mspropst]

Nevermind.

Dampscale Basilisk profile originally done by beefcake, updated by T@rget then updated for 85s by Makelio. I'm just posting it around to all the people who've been requesting it or made profiles that would go well with this... for instance a Scryer profile following getting Aldor to exalted. Or someone who accidentally turned a bit of Aldor rep items (Marks/Armaments) before they realized they just wanted to do Scryer rep.

Link to profile where these are originally located:

T@rget's version and then Makelio's for level 85's updated version further down.

As well as a direct link to the two files:

View attachment 39794
View attachment 39793

Start nearby the river(s) in Terokkar Forest. Set pull distance to 35 so you don't miss the ones across the river. GRIND BOT. There's a blackspot by the nearby alliance town to avoid the guards. Hope this helps. Just tested out the one for 85s and it works well, I would suggest Mr. Item Remover set to remove Curved Basilisk Claw, Chunk o' Basilisk, Fel Scales, Shimmering Basilisk Skin. This'll cover a large amount of the trash you'll pick up... even if you're setting skinning to "on." If not, you'll have even less.


If you also need a Scryer Rep Farming profile, it's located here (I have not tested this one yet), please read the instructions at the original posting:

Scryer reputation farming

Hope this helps!

 

[leeasd666]

good, I just low, and he did not move, what could it be? I looked in and saw the profile hotspost are all there. help plz

 

[Jurii]

"With a lvl 12 guild you gain 10% XP, and if you have Banner of Cooperation you can gain an additional 5% while its up"


Dont you only gain 5% more rep from it for KILLING monsters, not turning in quests, seeing that the spiders themselves dont give rep, only their quest items, how does the banner increase your rep gained by 5%?

 

[Timisoreanu]

Thank you for editing it Sastres!

 

[Mawty]

Amazing profile, mad props bro

 

[Fishtony]

Dear all who have trouble starting this bot as of version 2.5 you have to use [BETA] GrindBuddy instead of regular grindbot!

The problem with the profile stucking nearby the tree trunk is still here tho :/

Anyone can help solve this or provide info on how to "repair" the profile?

 

[Fishtony]

Dear all who have trouble starting this bot as of version 2.5 you have to use [BETA] GrindBuddy instead of regular grindbot!

The problem with the profile stucking nearby the tree trunk is still here tho :/

Anyone can help solve this or provide info on how to "repair" the profile?

Had a breakthrough!

Open your profile logs and remove " <Hotspot x="-3180.092" y="4111.554" z="0.9448026" /> " line.

Your character will no longer move to that hotspot therefore never stopping the profile from working repeatedly.

 

[Fishtony]

Had a breakthrough!

Open your profile logs and remove " <Hotspot x="-3180.092" y="4111.554" z="0.9448026" /> " line.

Your character will no longer move to that hotspot therefore never stopping the profile from working repeatedly.

Sad to report the player just stops moving in other spots randomly. Could use some help from someone more experienced!

 

[LuckyZippo]

i changed the profile to alliance, repair&mail working, fixed one hotspot, no stops for me in ~28h of grinding

i am using a rogue with nightstalker&burst of speed, singular perma stealth option and maximum mount distance, works pretty good