What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Bot is not targetting.

D

Dark57

New Member
Joined
Jun 6, 2012
Messages
500
Reaction score
7
Hey guys, not sure if this is a known issue or maybe my settings are screwed up. I'm here trying to write some profiles for HB and upon testing my first one I noticed the bot doesn't attack anything that doesn't attack him first. Now this wouldn't be such an issue if my profiles weren't supposed to be for a max level toon killing mobs from level 7 all the way to 90 themselves. In fact the only time anything actually attacks me if when I run through them, then the bot will attack and loot the mob like its supposed too. However it will not do this before that happens.

Now you guys can see why this is an issue, especially since I'm trying to get the bot to farm tons of cloth for a tailoring profile.

For bot settings I have:

Kill between hotspots enabled.
Pull Distance set to 35.
Loot Radius set to 45.
Loot Mobs enabled.

In my profile I have my factions correct according to the Wiki.
The min and max level of my targets are appropriate for the area.
The max distance is set to 35 in my profile also.

As far as I can see my settings are correct, so I'm just looking for verification that its the bot. The only solution I can think of right now is to put hotspots on everything I want to kill. However that won't work everywhere, especially where there are pathing mobs. This looks extremely suspicious and I definitely don't want my profiles to be a reason why people get banned.
 

Attachments

Last edited:
Nope, tried Singular and CLU for CC's. Made the pull distance HUGE like 60+ and the path basically walks next to them. I disabled the plugins and still nothing.

I have this for the grind profile settings. I have also tried faction id's 128 (Enemy) by itself, with 41 (Venture Co) and just 41 by itself.
<TargetMinLevel>1</TargetMinLevel>
<TargetMaxLevel>12</TargetMaxLevel>
<Factions>41</Factions>
<MaxDistance>55</MaxDistance>

Has anyone else had an issue with their bot targetting?
 
Bumping, still trying to figure out if anyone else is having this issue.
 
Ok, here it is. First I tried handwriting the profile and it was doing it so I went and copied the example from the Wiki and nothing changed.
 

Attachments

I have the same issue. Alliance Level 75 Warrior using Singular and GrindBot to try and farm mageweave, I run to all the points just fine. I've fiddled with the pull distance settings on the bot itself to no effect, and I've tried looking at the singular config but there's no pull distance option there.
Here is my profile:
<Name>Cloth - Mageweave Felwood</Name>
<MinLevel>74</MinLevel>
<MaxLevel>80</MaxLevel>

<MinDurability>0.3</MinDurability>
<MinFreeBagSlots>2</MinFreeBagSlots>

<MailGrey>False</MailGrey>
<MailWhite>False</MailWhite>
<MailGreen>True</MailGreen>
<MailBlue>True</MailBlue>
<MailPurple>True</MailPurple>

<SellGrey>True</SellGrey>
<SellWhite>True</SellWhite>
<SellGreen>False</SellGreen>
<SellBlue>False</SellBlue>
<SellPurple>False</SellPurple>

<AvoidMobs>
<Mob Name="Blackwind Warp Chaser" Entry="23219" />
</AvoidMobs>

<Blackspots>
<Blackspot X="-8895.609" Y="-428.6633" Z="66.3858" Radius="21.39053" />
</Blackspots>


<Hotspots>
<Hotspot X="6781.408" Y="-1945.352" Z="550.9193" />
<Hotspot X="6832.412" Y="-1965.17" Z="551.5292" />
<Hotspot X="6859.949" Y="-1914.677" Z="550.9202" />
<Hotspot X="6820.843" Y="-1865.638" Z="550.9199" />
<Hotspot X="6819.084" Y="-1827.906" Z="560.8637" />
<Hotspot X="6906.483" Y="-1819.999" Z="570.4216" />
<Hotspot X="6803.881" Y="-1833.009" Z="558.6169" />
<Hotspot X="6767.971" Y="-1884.188" Z="550.3257" />
<Hotspot X="6719.006" Y="-1884.183" Z="549.6933" />
<Hotspot X="6708.51" Y="-1906.885" Z="548.6392" />
<Hotspot X="6715.842" Y="-1929.988" Z="546.0461" />
<Hotspot X="6618.597" Y="-1943.878" Z="549.538" />
<Hotspot X="6628.442" Y="-1991.956" Z="551.8208" />
<Hotspot X="6701.857" Y="-1960.033" Z="552.2963" />
<Hotspot X="6709.978" Y="-1978.611" Z="558.9046" />
<Hotspot X="6732.984" Y="-1955.234" Z="550.4825" />
<Hotspot X="6783.639" Y="-1953.338" Z="551.1652" />
</Hotspots>

</HBProfile>

Edit: I added the grind area + faction id parts, and now its working.. ! yay!
 
Last edited:
Same issue here. I mostly run archaelogy bot. When I get aggroed, I freeze and the bot stops running. Luckily it's a high level toon in Kalimdor so they just keep wailing on me indefinitely. I tried my mage (80+) and Paladin (85+) and they try to quest with questbot but the same issues arise and they die over and over and over again until the res timer is too long and it boots me out. When I get aggroed, the whole bot just basically freezes until I de-aggro. When I take over control and kill the mob, it runs to their body, loots them and continues to quest and/or dig, like it never happened

I have:

1) I've deleted and reinstalled. No good.
2) I've tried re-installing over a previous build. No good.
3) I've tried restarting my machine. No good.
4) I've tried running a blank profile. No good.
5) I've tried reinstalling and updating all my profiles. No good.
6) I've tried disabling all plugins. No good.
7) I've tried enabling all plugins. No good.
8) Tried installing CLU. No Good
9) Tried using Singular with CLU installed. No good
10) Tried using Singular after uninstalling CLU again. No good.

WTF? I can't even do botted archaeology if it just freezes up every time I get aggro. I've tried to make my toon mount and fly every time but aggro is inevitable and means all questing/grinding/archaeology is pointless. I didn't buy a bot to fish. I was hoping it would do a few more things.
 

Attachments

Last edited:
raviadso said:
Same issue here. I mostly run archaelogy bot. When I get aggroed, I freeze and the bot stops running. Luckily it's a high level toon in Kalimdor so they just keep wailing on me indefinitely. I tried my mage (80+) and Paladin (85+) and they try to quest with questbot but the same issues arise and they die over and over and over again until the res timer is too long and it boots me out. When I get aggroed, the whole bot just basically freezes until I de-aggro. When I take over control and kill the mob, it runs to their body, loots them and continues to quest and/or dig, like it never happened

I have:

1) I've deleted and reinstalled. No good.
2) I've tried re-installing over a previous build. No good.
3) I've tried restarting my machine. No good.
4) I've tried running a blank profile. No good.
5) I've tried reinstalling and updating all my profiles. No good.
6) I've tried disabling all plugins. No good.
7) I've tried enabling all plugins. No good.
8) Tried installing CLU. No Good
9) Tried using Singular with CLU installed. No good
10) Tried using Singular after uninstalling CLU again. No good.

WTF? I can't even do botted archaeology if it just freezes up every time I get aggro. I've tried to make my toon mount and fly every time but aggro is inevitable and means all questing/grinding/archaeology is pointless. I didn't buy a bot to fish. I was hoping it would do a few more things.
Click to expand...

One that is not the same issue I have at all, two don't hijack threads, and three make a new thread with your issue.
 
I have figured out the issue, the bot does not target if I have "Loot mobs" checked in the bot settings. Not sure why, but it does it on every profile so now I am going to try the loot plugin that someone has made.
 
You must log in or register to reply here.
Back
Top