What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal
RebornBuddy Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[A][QB] Tanaan Apexis Daily + 5 Objectives + Unseen Influence

M

Mucanovic

Member
Joined
Jul 2, 2015
Messages
50
[A][QB] Tanaan Apexis Daily + 5 Objectives + Unseen Influence + Pressing the Attack

This is my first attempt at a decent profile. If you have any feedback I would love to hear it.

What does this profile do?
  1. Tanaan table daily
    - Fel Forge
    - Iron Front
    - Ironhold Harbor
    - Bleeding Hollow
    - Kra'nak
    - Sha'naar
  2. Tanaan remaining objectives(5)
  3. Pressing the Attack
  4. Unseen Influence(chance to complete since it loots chests)
  5. Parvink Quests
    - Demonslayer of Tanaan
    - Bringing Down the Iron Horde
    - Tooth and Claw
  6. Vindicator Krethos Quests
    - Disarming Sha'naar
    - Breaking Their Fel Bonds
    - Secrets of the Shadow Council
    - Bloodied Blades of Zeth'Gol
    - A Little Wetwork
    - Harnessing Their Power

Settings used:
  1. KillBetweenHotspots: true
  2. LootMobs: true

Requirements:
  1. Know all the flightpaths in Tanaan Jungle
  2. Start from Garrison or Tanaan
  3. I would say at least ilvl 640

Tested on:
  1. ilvl696 - never died
  2. ilvl685 - never died
  3. ilvl650 - died alot in iron front because of pulling 5 mobs(changed combat routine to not pull more)

Tips:
  • Would suggest not restarting the bot when it's turning in the table daily.
  • Dont 100% afk
  • If you have issues with flightmaster not being recognized restarting the bot worked for me
  • Set Tanaan garrison ability to orb
  • Give feedback so I can update the profile properly

Todo's:
  • Add Ironhold Harbor oil questid
  • Add Iron Front oil questid
  • Add Sha'naar oil questid
  • Maybe add flighpath support for other languages

Issues:
  • Sometimes thinks an objective area is done because of a bug by Blizzard. Objective will be at 100% but reward requires one more kill.
  • Can sometimes keep farming an area for a few minutes while quest is done.
  • Can sometimes try to loot a chest that requires complex movement, should blacklist this chest after a while.
  • If you already have an active quests on Parvink it will fail to pick up a second one(for example if you failed to complete it the day before and try to pick up a different one the next day).

Changes v5:
  • Added the last of Krethos quests
  • Added Sha'naar daily
  • Can now be started from Garrison
  • Will now pick up all quests


Would love to hear if you used this profile and if it worked for you. If someone can find the questids for the Ironhold Harbor oil, Iron Front oil and Sha'naar oil objectives please post them in this topic.
 

Attachments

Last edited:
After finishing the Iron Front quest he ran to the flightmaster and i get this error:

[Flight Path] No valid flightpath at both ends. (No flightpath found at start No flightpath found at end)

Then he starts to run to Lion.

German WoW client.
 
Ive tested this on 3 diffrent toons so far and noticed that the interact with ragepotions and such are really bad remove that cuase it dont give a shit and it would speed it up =) otherwise a solid good profile
 
Figaro10 said:
After finishing the Iron Front quest he ran to the flightmaster and i get this error:

[Flight Path] No valid flightpath at both ends. (No flightpath found at start No flightpath found at end)

Then he starts to run to Lion.

German WoW client.
Click to expand...

Since I dont know what the Tanaan flightpaths are called in german I cant fix this for you. You could dive into the profile and change all the TaxiRide lines.

(<CustomBehavior File="TaxiRide" MobId="92809" DestName="Vault of the Earth" WaitTime="3000" />)

Just replace Vault of the Earth or whatever other taxiride with the german name. Since you cant use & or ' you must use a part of the name. For example Lion's Watch becomes Lion or s Watch.

zinner said:
Ive tested this on 3 diffrent toons so far and noticed that the interact with ragepotions and such are really bad remove that cuase it dont give a shit and it would speed it up =) otherwise a solid good profile
Click to expand...

Thank you for the feedback. I removed all the interaction with buffs in all zones and uploaded the updated profile.
 
Worked well for me - only 2 things I found (that had no affect on the profile working), is that;

1. The bot doesn't take fps from point A to End - it stops at each intermediary stop.

2. The wait time when doing some of the quests (e.g. Ruins of Kra'nak) is too long imo - for example, it burns the scrolls -> Waits 3 seconds -> Then waits 3 more seconds. The 2nd wait is unnecessary I think.

Just small 'cosmetic' things I noticed.
 
Jadax said:
Worked well for me - only 2 things I found (that had no affect on the profile working), is that;

1. The bot doesn't take fps from point A to End - it stops at each intermediary stop.

2. The wait time when doing some of the quests (e.g. Ruins of Kra'nak) is too long imo - for example, it burns the scrolls -> Waits 3 seconds -> Then waits 3 more seconds. The 2nd wait is unnecessary I think.

Just small 'cosmetic' things I noticed.
Click to expand...

Thank you for the feedback. As for number 1, when I tried to taxiride to the endpoint the bot said it could not find a valid route so I made it go from fp to fp. As for number 2 I tried fixing this by setting waittime to 0 and maxattempts to 1 but somehow the bot will still wait for the fire animations to end so I cant make this go faster.

EDIT:

Think I found a fix. Will upload later after some testing.
 
Last edited:
abramovk said:
Russian client
Click to expand...
You could open the file and ctrl f search for all taxiride lines and remove them, then it should work. Since 6.1 I think there is an bug with hb not using flightpaths thats why I added custom TaxiRides, problem is they are based on the names of the nodes.
 
Mucanovic said:
You could open the file and ctrl f search for all taxiride lines and remove them, then it should work. Since 6.1 I think there is an bug with hb not using flightpaths thats why I added custom TaxiRides, problem is they are based on the names of the nodes.
Click to expand...
Waiting for 3-5 minutes and runs quests. It works well. Thx
 
Version: v3

The bot waits at the NPC to pickup 'Pressing the Attack' even though the npc doesn't have that quest to give. You get that quest after you do the daily map quest.
 
Last edited:
You must log in or register to reply here.
Back
Top