What's new
  • Visit Rebornbuddy
  • Visit Resources
  • Visit API Documentation
  • Visit Downloads
  • Visit Portal
  • Visit Panda Profiles
  • Visit LLamamMagic

DB issues (I'm new, be gentle!)

Status
Not open for further replies.

Lita

Member
Joined
Jan 8, 2013
Messages
57
Reaction score
1
Hello and apologies for beforehand if I've forgotten anything.
I'm new to all this but would very much to get a proper hang of it.

Reason as why I haven't attached any logs is because I'm quite uncertain which log to upload as I've got quite a few already and not sure which is relevant and which is not.
However, this is the latest one, trying to troubleshoot GE problem as seen here.

http://www.thebuddyforum.com/demonb...-equipper-community-version-3.html#post992939
9196 2013-01-09 09.21.txt - Speedy Share - upload your files here

Still fairly fresh with all this.
My D3 just froze for first time yesterday and I'm still trying to figure out best way to level up a toon and whatnot.

Had to mess around with several leveling profiles and most of them were outdated or too glitchy to play with.
I'm now running Full Questing - All Acts - Complete - Tested with included and recommended plugins and Identified.

I hope inferno profiles are kept well shaped and in working condition, as it very much seems like by poking around these forums.

Not too sure at what's wrong or what I'm doing wrong.
Been babysitting bot for most of the day and each time I use portal to get in town and sell stuff, occasionally bot stops working.
Just says "Bot paused" and won't sell one final blue item from inventory.

I then tried to stop it. All good.
Then start it again. DB froze.

Any clues what am I doing wrong here?
Slightly irritating.
 
if you try botting for the first time it's better to already have a geared lvl 60 and start one of the tested/recommended profiles for act3.

Download Demonbuddy, make a "profiles" folder and a "plugins" folder, put a decent act3 grind profile in the profiles folder and download latest giles trinity from the plugins section, put it in the plugins folder.

make sure giles trinity plugin is activated.

D3 can always crash due to some unknown reasons. people deal with it and set up a relogger.

With Act3 you won't need much babysitting.
With lvl profiles you will need.

Best way to level is having a second account and leeching exp in MP10.

If i don't like to level this way then "wretched mother" is a good and simple profile for norm/nm/hell. http://www.thebuddyforum.com/demonb.../act-1/54316-act1-lvl-2-14-queen-running.html
also a good way is manually changing the "inferno" with an editor in a act3 profile to "normal"
So you can run act3 in normal mode without troubles. but good gear according to your level is required.

i dont like all other act1 and act2 profiles, but that's just my 2 cents.
 
Last edited:
upload a full log as an attachment please. we dont accept logs linked from offsite.
 
upload a full log as an attachment please. we dont accept logs linked from offsite.
My bad.

make sure giles trinity plugin is activated.
I've got Giles Trinity already and it's activated.

D3 can always crash due to some unknown reasons. people deal with it and set up a relogger.
I tried YAR but I think it's more of a hassle than anything else, I got it working but it kept acting weird and couldn't really get D3 and DB up as intended after crash(es).

Best way to level is having a second account and leeching exp in MP10.
I've got my main account but I'm rather sensitive whether I should accompany it with my bot account or not, or for all I know it's too late to "protect" it already.
And I take MP is Monster Power? I tried googling it and searching these forums but really couldn't find what it does. Other than recommendations like 0-3 is fine but higher than 3 is not worth it.

If i don't like to level this way then "wretched mother" is a good and simple profile for norm/nm/hell. http://www.thebuddyforum.com/demonb.../act-1/54316-act1-lvl-2-14-queen-running.html
also a good way is manually changing the "inferno" with an editor in a act3 profile to "normal"
So you can run act3 in normal mode without troubles. but good gear according to your level is required.
I actually have tried this profile but I have to progress in acts so I didn't think it's worth it in a long run.
And yup, I have changed few "inferno leveling" profiles to "normal" but they were act 1 and act 2, though.
 

Attachments

Last edited:
are you sure your loading the correct profile? most of the time in profile packs, they have a START_HERE profile, that will autoload the ones that are needed.
 
are you sure your loading the correct profile? most of the time in profile packs, they have a START_HERE profile, that will autoload the ones that are needed.
I'm loading "Act3_rrix" and other files for Act 3 are "Act3_StartNewHell", "Act3_StartNewInferno", "Act3_StartNewNightmare" and "Act3_StartNewNormal".
I am a bit over halfway in Act 3 at the moment.

There seems to also be (apart from similar files for each act) "AllActs_Relogger" and "YAR_Kickstart" but I'm really not sure what to with them or when to use.
When I used YAR I loaded "Act3_rrix", maybe I should have loaded "YAR_Kickstart"?
 
I'm loading "Act3_rrix" and other files for Act 3 are "Act3_StartNewHell", "Act3_StartNewInferno", "Act3_StartNewNightmare" and "Act3_StartNewNormal".
I am a bit over halfway in Act 3 at the moment.

There seems to also be (apart from similar files for each act) "AllActs_Relogger" and "YAR_Kickstart" but I'm really not sure what to with them or when to use.
When I used YAR I loaded "Act3_rrix", maybe I should have loaded "YAR_Kickstart"?
follow the instructions on the thread for what one you need to use.
 
[07:21:56.186 N] We're in the wrong act, loading Act 3


start the profile on char screen
 
follow the instructions on the thread for what one you need to use.
Mate, as friendly and helpful you're trying to be details on that topic are very scarce.
http://www.thebuddyforum.com/demonb...4-full-questing-all-acts-complete-tested.html

Profiles that are named like this will resume the current game, and if possible load the correct profile if you're in a different act. These will simply "work" on any difficulty if you're already in a game. These are configured so that when you beat a certain difficulty, it will automatically "resume" on the next available game difficulty (e.g. Normal to Nightmare).
Act1_rrrix.xml
Act2_rrrix.xml
Act3_rrrix.xml
Act4_rrrix.xml

Until I know what's the problem for certain I'm not going to ask support on that leveling topic as I already have asked for it here and Giles Equipper topic.
I've been babysitting my bot past few hours now and it seems to work fine, apart from running back and forth doing nothing at few certain points, especially before taking a portal to next cursed tower level or so and I suppose it's very much leveling profile related issue.

However, each time I kill a boss and start identifying loot, GE says "[11:42:01.131 N] [GilesEquipper 1.7.5.2] [**PACK**] Pausing bot while we identify items" and then status of bot changes to "Bot paused".
I have to "Pause" and "Unpause" bot in order to get it functioning again, it then identifies one more item and does the glitch above.

And, just now, when it went for town run selling items GE was unable to function normally and it has vendor and inventory screens open but won't do anything.
So I "Pause" and "Unpause" bot, it relogs, TPs, vendor and this time just fine.

[07:21:56.186 N] We're in the wrong act, loading Act 3
start the profile on char screen
Really? But it seems to be working more or less fine after pausing&unpausing bot.
Until now I've loaded this profile whilst in-game because I've thought that's the way to do it - at least for some profiles.
 
Last edited:
dont use the plugin in that case,its not essential for the profile
 
Update on all this.
Even the leveling profile, has been working superb for past several hours.

I've been playing another game on main screen and have checked on D3 actually only few times but it warms my heart each time I do just to see bot happily progressing onward in Nightmare!
Just now had to give bot a hand on Butcher though, and I think author of this profile also stated it''s best to handle it manually due few limitations.

Anyway, after disabling Guiles Equipper it's been running like a dream!
6h 32min session according to Buddy Auth at the moment.

And apart from giving a hand with Butcher it's been very smooth!
Thank you everyone, appreciated.
 
Status
Not open for further replies.
Back
Top