What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[A3 Inferno] Alkaizer RUN Gnome Proof - Unstuckable

thebeaver said:
For some reason my barb keeps running at the same level after having discovered The Breach in Keep Depth's level 2. He then finally (somtimes after 3-4 minutes) finds the entrance back to level 1 and then starts clearing that area.

Isn't he supposed to when he finds the breach to tp back then take the waypoint back to keep depths level 1 and then clear?

Great profile anyway mate, very good job!
Click to expand...
yyes that's fixed in 2.5O.6
 
Purged1234 said:
Been using your profiles for a couple weeks gnome. Thanks for all the hard work. Unfortunately it's now broken for me.

Early on, was running Giles 1.6.2 + RadsAtom 1.5.1 and your 2.98d routine. Had no issues at all for the most part, except the odd disconnect every few days.

Switched to Giles 1.6.3 + RadsAtom 1.5.1 and was averaging 60m XP / Hour with an Archon Wiz using LS+HF Rings and Cain's Set on MP0, using 2.99d RC v3 routine. Was awesome, got from 0-65 in under a week. =)

I could do this while having D3 minimized and watching movies, or sleeping. 100% AFK and it was amazing.

However, after the 1.0.6 patch i am plagued with problems and i can not figure it out.

Now, if i minimize D3 or open any other programs my bot will AFK Disconnect after 30 mins. No "Stuck logs" or any error messages, its as if the script just stops working randomly.

have tried 3 fresh clean installs, as well as upgrading to the new Giles Unified Community plugin and the new Rads 2.0.


Now? your routines don't work at all. :( My bot just ports to core of arreat, and spam buffs himself. Doesn't work at all. No error messages.

Completely confused, as the new Act 3 champion hunter profile works flawlessly, however it only averages 17m xp/hr and peaks at 25m / hr whereas your 2.4 profile was averaging me 60m xp and peaking at 75m + !!

:(
Click to expand...

AWESOME ! I'M AN ARCHON WIZ AND I PEAK AT 35m with HF and 31% BONUS EXP FROM MY HELM, WHAT IS YOUR DPS, ARMOR AND AR LIKE ? MIND SHARING :) ?
 
thebeaver said:
For some reason my barb keeps running at the same level after having discovered The Breach in Keep Depth's level 2. He then finally (somtimes after 3-4 minutes) finds the entrance back to level 1 and then starts clearing that area.

Isn't he supposed to when he finds the breach to tp back then take the waypoint back to keep depths level 1 and then clear?

Great profile anyway mate, very good job!
Click to expand...


which ver were you running?
 
Purged1234 said:
Now? your routines don't work at all. My bot just ports to core of arreat, and spam buffs himself. Doesn't work at all. No error message
Click to expand...

all the 2.5 versions work after 1.06, and thank you very much I had them all working within 2 hours of the patch. Can't say the same for most other profiles. Couple reasons why I wish to slow down coding these profiles, as those few who just don't know or have no clue love to drop flames when they don't RTFM. Sure there was a few bugs, however; I re wrote the entire code in 2 hours, there is bound to be bugs.
 
Last edited:
zerohour_ said:
Code: 
[00:38:04.252 N] ***********************************************************************
[00:38:04.352 N] This is not the starting position Alkaizer did.
[00:38:04.368 N] We needed to make sure you have the right quest enabled and wavepoints.
[00:38:04.465 N] Next time CORE 2 will load instead.
[00:38:04.482 N] ***********************************************************************

I get this whenever I do CORE 1.
Click to expand...

Normal it's just a log blur, saying WE NEEDED TO MAKE SURE YOU HAVE THE RIGHT QUEST ENABLED>
 
Great profile!

Could you please clean up the versions a bit? It's very hard to know which one to download ...
 
Hey! Either I've understood this totally wrong, or there is something that I miss. I've been searching the forums and googled like an idiot.

But when I download one of these profiles, I can only get the bot to run one at a time, and I also have to manually active each run. Is it supposed to be like this? I mean, I thought I would be able to leave the computer and it would to these entire runs by it-self over and over. But now I need to active the Core first, then I need to load Tower. And so on.

Do you guys understand what I'm trying to say? I don't really like to know how this works, since in the DemonBuddy instruction .PDF file, there was a example. But when I download these profiles, there are SEVERAL XML files to choose from, and I need to load each one separably. And in the instruction, there was only one to choose from.

I really hope this text made sense, and I would be really happy if someone took time and explained for me, maybe this is just a /facepalm question... But I've really tried to get this to work..

Thanks a ton for these profiles though!
 
Swizzah said:
Hey! Either I've understood this totally wrong, or there is something that I miss. I've been searching the forums and googled like an idiot.

But when I download one of these profiles, I can only get the bot to run one at a time, and I also have to manually active each run. Is it supposed to be like this? I mean, I thought I would be able to leave the computer and it would to these entire runs by it-self over and over. But now I need to active the Core first, then I need to load Tower. And so on.

Do you guys understand what I'm trying to say? I don't really like to know how this works, since in the DemonBuddy instruction .PDF file, there was a example. But when I download these profiles, there are SEVERAL XML files to choose from, and I need to load each one separably. And in the instruction, there was only one to choose from.

I really hope this text made sense, and I would be really happy if someone took time and explained for me, maybe this is just a /facepalm question... But I've really tried to get this to work..

Thanks a ton for these profiles though!
Click to expand...
Obviously you didnt read carefully the first post... learn MORE about radsatom or atom and THEN come back if you still have any, that shoulldnt be case, questions.
 
Nice profile doing 30m xp/h with 0% bonus experience

Monk - 80 paragon - 150 k dps unbuffed + 3% ls ----> mp - 1
2 deaths/hour
Using 2.50.6 + radatom 1.5.1 + Trinity 1.7.1.4

But I can not be 100% afk here. Whenever I'm playing another game for 1 or 2 hours, my DB stay afk and DC.
Best profile for xp/hour for me
Thx

2.50.6 Pag. 74
 
Last edited:
hi nice profile, where i can find 2.50.6, cant see it in the first 2 posts
 
Can someone explain to me how to get this working, I cant figure this out for nothing, i am new to this.
 
Swizzah said:
Hey! Either I've understood this totally wrong, or there is something that I miss. I've been searching the forums and googled like an idiot.

But when I download one of these profiles, I can only get the bot to run one at a time, and I also have to manually active each run. Is it supposed to be like this? I mean, I thought I would be able to leave the computer and it would to these entire runs by it-self over and over. But now I need to active the Core first, then I need to load Tower. And so on.

Do you guys understand what I'm trying to say? I don't really like to know how this works, since in the DemonBuddy instruction .PDF file, there was a example. But when I download these profiles, there are SEVERAL XML files to choose from, and I need to load each one separably. And in the instruction, there was only one to choose from.

I really hope this text made sense, and I would be really happy if someone took time and explained for me, maybe this is just a /facepalm question... But I've really tried to get this to work..

Thanks a ton for these profiles though!
Click to expand...

please install radatom and rename the radsatom folder to 'radsatom' and not radatom 1.5.1
 
gnomegawd said:
- Known stable release by reading done here -

ver 1.0 Rate 8.5 / 10 (don't read much about it, but it's a great fall back nearly fool proof please re-rate accordingly)
ver 2.98d Rate 9.5 / 10 (read a lot of good reports about this version)
2.99.2 Rate 9.0 / 10 (rated because works with newest patch as of nov 29 12)
please contact me to have adds changes to this list.



Version 3 coming soon!

Like one of my profiles? Send me a donation before you add me on xfire: gnomegawd
Click to expand...

so the version 2.98d is ok with patch 1.06 ?
 
There is a big chaos on the 1st page imo, so I'm asking here:
Am I right, that every version, which is public right now, only works with GilesTrinity 1.6.x and there isn't any version, which is working with Unified Trinity?
So the only version, which is working with Unified + Atom is v3, which is the donator-version.

Is this correct? :P
 
SHJordan said:
Obviously you didnt read carefully the first post... learn MORE about radsatom or atom and THEN come back if you still have any, that shoulldnt be case, questions.
Click to expand...

I have, but the thing is, I don't understand how RadsAtom works. Where to place it, or how to use it.

Thanks for the reply though! Atleast I know what the problem is now.
 
You must log in or register to reply here.
Back
Top