What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

[HB2] Horde 1-60 (Originally by Bliik)

Theramore isle again? The bot doesn't even use that zone. If you could be more accurate I will fix the issue, but telling me an area where the bot is never anywhere near doesnt strike me as a reliable means to fix it
 
Been using this so far with pretty decent success On my hunter up to 36, and so far on my Shamy, up till now. One thing i've noticed it runs through other areas on its way to the hotspots, sometimes running right through mobs it was killing before, aggroing about 4-5 before he gets dismounted, or decides to dismount and fight, and just gets raped. Anyway to make it attack mobs to clear out the route FIRST before running through? This is a non hot spot area, pathing through to a hotspot zone, with lots of mobs in between me and the hotspot. Main issue, Feralis 46-48, It will run through the Ruins of Islidian where there is a bunch of Gordunni Ogres, and just get raped. I tried to add the faction and lower the pull level, but im assuming since its not a hotspot it ignores all the mobs. It wont pull any of the ogres, just wait its attacked, then defend, sometimes it just tries to ride on through.

Edit - I have noticed this is more than likely a CC issue, it was doing this with the CC that comes with HB as a Shamy, i am now using Shamwow, issue fixed, it now works AWESOME. Above mentioned issue is gone.
 
Last edited:
Yeah, that is a mixture of an issue between CC and HB. HB provides the targetting, but some CCs have better methods of handling this. Generally, it should be fixed in the HB core so that CC developers don't need to account for it, but who am I to complain? ;)
 
I got two toons at lvl 48 and lvl 50. They both are running into Theramore Isle trying to repair. It started happening at lvl48
There any logs i can provide, i looked at them but all they say is "vending and repairing".
 
just tried the original 1-60 one. that too tries to goto theramore, my druid made it all the way killing all the lvl53 mobs, but couldnt talk to the repair guy. So both profiles have same issues. unless the mesh is doing it

For anyone stuck, what you have to do is fly to 'gadgetzan' and then re-start HB with this profile, that way it doesnt get a chance to goto theramore :) and instead goes off hunting and repairing in gadgetzan
 
Last edited:
jungly said:
I got two toons at lvl 48 and lvl 50. They both are running into Theramore Isle trying to repair. It started happening at lvl48
There any logs i can provide, i looked at them but all they say is "vending and repairing".
Click to expand...

same problem i got..
 
First off nice work zorg this is a pretty clean profile and works very smoothly for the most part.. However I do have some questions. What is a good xp/hr in general starting in Ashenvale levels 26-29..to desolace (32-36) I seem to cap at about 15-20k/hr and I am not sure if I am utilizing this profile to the max or if its just my character. I am a fury specced warrior at level 26. I absolutely need better gear however I do not have awful gear right now, so I doubt it is gear related. I feel like I could be getting another 15k/hr out of this profile. Once again great work keep it up bro.
 
mbrooks102 said:
First off nice work zorg this is a pretty clean profile and works very smoothly for the most part.. However I do have some questions. What is a good xp/hr in general starting in Ashenvale levels 26-29..to desolace (32-36) I seem to cap at about 15-20k/hr and I am not sure if I am utilizing this profile to the max or if its just my character. I am a fury specced warrior at level 26. I absolutely need better gear however I do not have awful gear right now, so I doubt it is gear related. I feel like I could be getting another 15k/hr out of this profile. Once again great work keep it up bro.
Click to expand...

In Desolace I was around the same xp/hour as you for 32-36. It is a fairly slow grind through those levels but once you hit 36 and you move closer to the kodo graveyard your xp/hour should jump up to about 25k/hour (was a 10k/hour increase just from 35 to 36).
 
I would switch out the desolace to a better area if I thought it would get the usage it deserves - questing profiles are the future, unfortunately. It's only a matter of time :).
 
GREAT, this comes really as called cause i was just getting stuck on lvl 33 because it keeps trying on lvl 37/38 and in 5 hours havent even filled a half exp bar. TY! love ur profile though, got me to 33 without any probs (lvlling tauren warrior)
 
Awesome profile but it breaks once you get high enough to move to Desolace, just sends "Moving to Hotspot" in the log and sits there not moving,
I even hand moved the bot to Desolace just outside Thunder Axe Fortress and it still doesn't do anything :(
 
Hi all,

I'm new here and don't really understand everything yet..
but i downloaded the .xml on the first page.. i made a new char (tauren warrior) and set my bot on questing - beta.
Currently he's on lvl 3 and done everything well.

but is it correct what i've done so far?

Ps. only using AutoEquip.

Thanks
 
Hi agian,

Sorry dont know yet how to edit a post.. :(

But i just dinged lvl 4, and he's doing the "The Battleboars" quest and he start walking to a mountain thingy. xD

(dont know how to post my log so that's why i give it this way)

Could not generate full path from {X:-2921,593 Y:-1215,868 Z:63,08559} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-3002,17 Y:-1162,134 Z:59,44258} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-3046,06 Y:-1111,551 Z:57,10658} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2975,384 Y:-1116,71 Z:58,01086} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2986,955 Y:-1105,092 Z:61,66389} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2986,824 Y:-1104,639 Z:61,85652} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2982,43 Y:-1104,852 Z:60,60703} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2986,76 Y:-1105,072 Z:61,587} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2986,933 Y:-1104,226 Z:62,14171} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!
Could not generate full path from {X:-2986,195 Y:-1103,853 Z:62,08121} to {X:-2998,625 Y:-1090,733 Z:123,0117} (distance from end point to destination: 63,05445 yards)!

Can you do something with this?
 
I'm sorry that I have to disappoint you but this is a grinding profile and not a questing one, to make it work just switch from questing bet to grinding mode.
 
Running it at Level 25 on a Hunter (in Blackthorn Ridge). Everything seems to be working good, I'll update whenever I can!
 
Hey guys, im really new to all this botting stuff.. and im about to buy this bot, but i just want to try the trial first cause it sounds AMAZING! ive been trying to bot my lvl 9 preist.. i can set the profiles up but none of these profiles come with a mesh that i can find in the download?
if someone could explain this to me that would be amazing =)
thank you so much
 
with HB2 the meshes will download automatically and you do not need to do it yourself. there is an option in one of the HB tabs to set which is the default mesh folder.
 
thank you for that, it jsut started working but now it just stands there and the activity says its downloading mesh
does that for ages and does nothing.. what do i do?
 
You must log in or register to reply here.
Back
Top