What's new
By:
  • Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • Visit Resources
  • Visit Downloads
  • Visit Portal

Really good working Barb Config (.146)

Tavi80 said:
difference between Hell an Inferno in DPS?
Click to expand...

I dont know why you would want to run in hell. My dps is only 12k and most of the gear is cheap off the AH, I started him @ 8k with a 150k weap till he could buy a better one from his gold. More less I think its HP res all armor that will make the difference. and In hell those are alot less of a concern. Even in inferno its cake mode, u just might drop in GPH from being slower
 
Demonbuddy build 151 seems to run very well. No errors in the past 3 hours, smooth runs all around.
It feels like the DB team made the bot a tad bit slower but way more reliable. Good times.
 
I notice that my toon is now attacking the zombies (if they are around) just outside the cellar. Why is this happening? The toon is still running past the zombies that are at the beginning of the checkpoint though, only attacking those near the cellar.
 
Are u guys using Icool's kill wait 1,4 or icool's healer 1,2?
I have kill wait 1,4 and as above it kills zombies close to cellar entrance (skips those on the road tho). It skips all the zombies when i use both 1,4 icools kill wait and 'old' kill wait (not icool's version).

however the thing that is slowing me down the most now is that the bot checks every barrel that is close to cellar entrance twice. I mean he just walks to every barrel without destroying and then repeat the cycle, then he enters cellar

Does anyone have any clue how to make him ignore barrels or how to make him at least destroy em?
 
misiekxpxp said:
Are u guys using Icool's kill wait 1,4 or icool's healer 1,2?
I have kill wait 1,4 and as above it kills zombies close to cellar entrance (skips those on the road tho). It skips all the zombies when i use both 1,4 icools kill wait and 'old' kill wait (not icool's version).

however the thing that is slowing me down the most now is that the bot checks every barrel that is close to cellar entrance twice. I mean he just walks to every barrel without destroying and then repeat the cycle, then he enters cellar

Does anyone have any clue how to make him ignore barrels or how to make him at least destroy em?
Click to expand...

Are you guys using the correct build. Mine is just going to the cellar if its there, instantly entering. Using slipp's profile it will stop if there isnt one. As for the barrels I dont think I had to change any settings but put your object smashing to 0? that might help out I would assume. ICool helper I think is what I was using because the killwait didnt exist when I began using this guys plugins. Though reading about the plugin it looks nice that the killwait enables attacking if no cellar is could. Which might be your case if you are running the profile that goes all the way regardless... it is enabling the kill so it would attack zombies at the cellar. Just a bit of reading.
 
Ok i will try Helper then (v 1.2).

Can you tell me where can i change the objects smash radius?

EDIT. using Helper v1.2 Instead of kill wait 1,4 solves my barrel problem.

EDIT2. @ author Awesome guide btw! Im with a stable 250 gph and i could never make it above 110 or something xD
 
Last edited:
Why is my character attacking the zombies right outside the cellar before entering it?
 
crease123 said:
I notice that my toon is now attacking the zombies (if they are around) just outside the cellar. Why is this happening? The toon is still running past the zombies that are at the beginning of the checkpoint though, only attacking those near the cellar.
Click to expand...
Maybe your HP is lower than 80% once you get near the cellar? If so, try lowering the treshold in icool's plugin. Personally I have disabled the attacking outside of the cellar regardless of HP since it will just slow me down. Else, don't know. I'm running demonbuddy version .155 and don't have this issue
 
Last edited:
Somewhere in this topic I posted about my new config. I tweaked it a little and made a new profile.
I think this one is a a bit balls-out, but way better than the one posted by OP if you have the right gear.
8-9 seconds failed run
17-22 seconds cellar run
Gph depending on your gold find & loot filter. I'm at roughly 430k with 243GF
I hardcoded five of the skills into the profile to make sure every skill is used at the exact right time.

Fast, uses sprint, charge, leap and Wrath together :D
It two -shots Sarkoth, so it does not need earthquake
It charges away from the midpoint mobs and one-shots the first adds in one Furious Charge, before TP-ing out
To make this work I had to equip a slow two-hander, so you will lose some gold find, but gain round time.

See for yourself:
[video=youtube;ULN5Xev_T0M]http://www.youtube.com/watch?v=ULN5Xev_T0M&feature=youtu.be[/video]

Build (must be exactly this!):
War Cry + Charge! For rage
Leap + Call of Arreat. The profile uses this at start for speed, rage and piles the first mobs into a tight group, so if the cellar isnt there, they'r killed fast by Charge
Wrath of the Berserker + Insanity for the speed + damage
Sprint + Marathon. Most of the time leap hits at least one mob, so there's enough rage for sprint. No double shout needed.
Furious charge+ Battering ram kills the mobs if the cellar isn't there and one-shots sarkot's friends if it is. I've one-shotted sarkoth with this once as well!
Bash + Onslaught kills Sarkoth in one or 2 blows.

Passives: ruthless, weapons master, brawler.
plugins: Icool's Sarkoth farm helper

Again, a big slow two-hander is key to this profile. If you have very good gear and a good one-hander this will work as well.
Tell me what you think :o


Todo: make the bot pick up the loot before it TP-s in a failed run. This will really add some GPH. Dunno how to do that from within a profile, Anyone?
 

Attachments

Last edited:
Also, updated the OP profile.
It had trouble when there are ranged mobs near the cellar. They interrupted the town portal cast. So now when there's no cellar, it now leaps away from the ranged mobs spawn point, stomps and earthquakes before using town portal. No more deaths!
It is important to rune leap with Death from above. Else you will get interrupted.

I guess this one is the safe profile for lower geared barbarians.
The profile above requires some better gear but is faster.
 

Attachments

Last edited:
Updated the first page, have added slipps new post for his build that is in this, as well as the 2 revisions to his profile. All of his profiles are listed incase an older one worked better for people. So far .160 and running completely fine on his original profile with 380GPH
 

@SlippyPete

Could you tell me what combat routine are u using? And what plugins except for Icool's Sarkh farm helper? I cant get the balls out profile to work, i cant pop wrath of berserker cuz my toon wastes all the fury for sprints.​
 
Last edited:
I'm using the Belphegor routine that comes standard with Demonbuddy. At the start of the profile, Belphegor should use War Cry. Does it use this at the start?
After that, the profile leaps and in mid-air it should use WotB. It has enough rage for that because of the shout. Have you runed War Cry with Charge?
Only after the leap, Belphegor will use sprint. At that time you're transformed already and it will only use sprint if there's rage.

When I'm using the balls-out profile revision 3 I dont use any plugins besides icool's.
Testing revision 4 now, same profile but using EMCBehaviours instead if icool's. Adds some safety while tp-ing and it seems to pickup gold better. Looks a bit slower though ;(
 
Last edited:
Yea i saw what it does on the video. Yes i runed War Cry with Charge i do have fury for WotB but for some reason bot decides to use sprint. After that he never has fury for WotB.
Whats your dps and can u tell what is your weapon that you are using for this profile?
 
SlippyPete said:
I'm using the Belphegor routine that comes standard with Demonbuddy. At the start of the profile, Belphegor should use War Cry. Does it use this at the start?
After that, the profile leaps and in mid-air it should use WotB. It has enough rage for that because of the shout. Have you runed War Cry with Charge?
Only after the leap, Belphegor will use sprint. At that time you're transformed already and it will only use sprint if there's rage.

When I'm using the balls-out profile revision 3 I dont use any plugins besides icool's.
Testing revision 4 now, same profile but using EMCBehaviours instead if icool's. Adds some safety while tp-ing and it seems to pickup gold better. Looks a bit slower though ;(
Click to expand...

WotB works for me with the balls out profile, casts it as soon as he has the resources during the leap thanks again slipp for being awesome =]

one suggestion to that one, I dont know if its going to be in rev4 or not. But it seems to not cast earthquake if there is not a cellar. Sometimes it does.
 
Last edited:
fr3357 said:
one suggestion to that one, I dont know if its going to be in rev4 or not. But it seems to not cast earthquake if there is not a cellar. Sometimes it does.
Click to expand...
Rev3 doesn't use earthquake at all, it's a different build. It kills so fast with that big two-hander charge, earthquake would be a waste.
If you mean its not using earthquake sometimes in rev2 the wait timer might me a little too short. But that would be weird since that part is no different from the original one,

misiekxpxp said:
Whats your dps and can u tell what is your weapon that you are using for this profile?
Click to expand...
My weapon is a 1240 dps 2-hander mace with 0.9 attacks per second. Was ~60k on the AH. My dps is 15000 without WotB

misiekxpxp said:
Yea i saw what it does on the video. Yes i runed War Cry with Charge i do have fury for WotB but for some reason bot decides to use sprint. After that he never has fury for WotB.
Click to expand...
Maybe also this has to do with a short wait timer. I delayed it a little in the attached version. Can you check if that does the trick?
 

Attachments

I feel there still is need for a little barbarian love, so if you dont mind me posting this I made a topic in the appropriate profiles section here. It should be easyer to find.
Also posted revision 4 over there, Worked very well for me last 10 hours. 18s avarage cellar runs :cool:
 
Perfect. Same question. How to fix barb short memory in picking up gold sometimes?? cheers!
 
You must log in or register to reply here.
Back
Top