[Release] Honorbuddy 2.0.0.4492

Funtimes · Apr 20, 2011

Nesox said:
Do a clean install, delete your old folder with honorbuddy make a new one and extract the files there.

Thanks Nesox =) you made my day. I appreciate you answering the dumb question lol. Been a long time since I have had a problem with HB, very happy with the product.

Mizzy · Apr 20, 2011

wilsonj17 said:
The guild bank feature is not bugged (It's working fine right now for me), i had the same problem when i had Bagnon addon enabled which changed the Interface of the bank overview which confuses GB2 so my alt would not put my mat's in the bank but trigger a dc or wow error, simply disabling that addon and any addon that changed my interface completly stopped this and nearly every bugg report being posted on this thread (apart from Mixed mode being bugged and AB digsites) i have not encounted, Most bugg report's are Generated by HB conflicting with wow addon's.

it is not an addon issue, I have no addons loaded. The issue is not with depositing, as soon as my bags are full it will stand mounted where the last node it harvested and never attempt to go to the bank, it will just spit out the error i posted before every second until wow disconnects due to inactivity.

bhardegger · Apr 20, 2011

Zeewolf said:
"QuestBot will no longer kill every mob within its path, while mounted. This cuts down the 'grind across the zone' behaviors on far quests, or 'talk to this person in the other zone' quests. - This may break some profiles that relied on the behavior. However, they should have accounted for it to begin with!"

The tol barad profile in my sig is designed so that it does clear mobs on route that would a) otherwise kill it and b) count to a later quest to save time killing them twice. This new behavior needs some kind of toggle so that profile writers can enable or disable, dont just presume that nobody was actually using that behavior to their advantage in profile writing

its looks bottish as hell to do this btw devs. running right by quest mobs are just keeping on running with a train and then stop at a mob finally and got rofl stomped. this needs to be removed or like zeewolf said made a toggle cuz im tired of watching my bot look like glider

surfer999 · Apr 20, 2011

ArchaeologyBuddy bug

Found Outland pathfinding bug. If ArchaeologyBuddy need to fly from Hellfire Basin Digsite to Arklon Ruins Digsite it will die in the canyon between Hellfire and Netherstorm.

Log attached.
CC: ShamWOW by Bobby53, last build

Second problem: if HB Activity: Downloading Mesh... then bot won't to fight back enemy.

Mr3uk · Apr 21, 2011

Any info on the next release with fixed mixed mode? Kinda crippling me not being able to use that atm

Nesox · Apr 21, 2011

Funtimes said:
Thanks Nesox =) you made my day. I appreciate you answering the dumb question lol. Been a long time since I have had a problem with HB, very happy with the product.

Np

Mizzy said:
it is not an addon issue, I have no addons loaded. The issue is not with depositing, as soon as my bags are full it will stand mounted where the last node it harvested and never attempt to go to the bank, it will just spit out the error i posted before every second until wow disconnects due to inactivity.

Are you in Vashj'ir ?

bhardegger said:
its looks bottish as hell to do this btw devs. running right by quest mobs are just keeping on running with a train and then stop at a mob finally and got rofl stomped. this needs to be removed or like zeewolf said made a toggle cuz im tired of watching my bot look like glider

Kill between hotspots will affect this behavior in the next release

Mr3uk said:
Any info on the next release with fixed mixed mode? Kinda crippling me not being able to use that atm

Working some on the bgbot atm, mixed should work fine again if ure running PvP/BgBot with some other bot.

rooster71 · Apr 21, 2011

There is no equipmeweights.txt in the folder, or anywhere in the zip file.

This is a clean install not overwritten

[12:58:45:903] [EquipMe] Using cached copy of weights
[12:58:45:917] [EquipMe] Error reading cached copy of weights
[12:58:45:917] [EquipMe] Could not find file 'D:\Honorbuddy_2.0.0.4492\Settings\EquipMeWeights.txt'.

Elemental Shammy

View attachment Elem Shammy - 21-04-2011_12_57 6084 Log.txt

neodite · Apr 21, 2011

rooster71 said:
There is no equipmeweights.txt in the folder, or anywhere in the zip file.

This is a clean install not overwritten

[12:58:45:903] [EquipMe] Using cached copy of weights
[12:58:45:917] [EquipMe] Error reading cached copy of weights
[12:58:45:917] [EquipMe] Could not find file 'D:\Honorbuddy_2.0.0.4492\Settings\EquipMeWeights.txt'.

Elemental Shammy

View attachment 21252

Did you remember to open EquipMe and click refresh?

rooster71 · Apr 21, 2011

neodite said:
Did you remember to open EquipMe and click refresh?

I dont see a refresh mate...

bigbangbaby · Apr 21, 2011

Sorry guys, but the move to hotspot, stop, move to next hotspot, stop, try unstuck, strafe, rinse and repeat is just awful!

I always use a clean install folder and always delete my Mesh folder before running a new update.
I watched the new release download the tiles, load them as it did so, then when it finished it unloaded all of them, reloaded them all moved 2 hotspots forward and then reload them! WTF???!!!

Back to 4354. That wasn't great either, but it's much better for questing than this!

pbettell · Apr 21, 2011

rooster71 said:
I dont see a refresh mate...

View attachment 21264

Little bit of intuition goes a long way, try "update weight sets."

lajser · Apr 21, 2011

way to buggy moving back to 4317

Mizzy · Apr 21, 2011

Nesox said:
Are you in Vashj'ir ?

Uldum is where I've been running it.

Nesox · Apr 21, 2011

lajser said:
way to buggy moving back to 4317

Care to elaborate that?

xRedbull · Apr 22, 2011

Been Running this Version with alot of issues. Across my Shaman and Hunter

1) I have been PvPing - I Use only about 4 Spells "Totemic Recall, Healing Surge, Purge, Riptide", Using Bobby53 Class.
2) My Wow Crashes every 30-45Min, Only when Botting BGs.
3) None of the classes no longer run smoothly. Example: Hunter sits there and doesn't "Call Pet" will run into mobs and melee attack. The list goes on.

I Leveled fine and have pvp'd int he past and never had as many issues as I have had with the past few Updates?

Is this my error or a HB error?

Please Help.View attachment 4-22-2011_1_31 AM 4752 Log 1231.txt

LOG ATTACHED

uiop · Apr 22, 2011

r0sc0 said:
left my bot last night set it for 3 hours, woke up 8 hours later its still running.
and hardly anything mined. the profile i use always has full bags no one else was at the spot.

I think you need to take this release down its far far to buggy

I had the same issue. Went back to 4354

Mr3uk · Apr 22, 2011

Nesox said:
Np
Working some on the bgbot atm, mixed should work fine again if ure running PvP/BgBot with some other bot.

This is not true, mixed mode still doesnt work for me and several others from what I can see. Tony said that it will be fixed in the next release so I just wondered when that might be. Ill attatch one more recent log to show that after a bg the bot doesnt continue to kill mobs anymore. Just runs around the waypoints and gets owned

The strange thing is that the bot can obviously see that im taking damage as its using abilities like ice barrier, but just not fighting back -.-

crack00r · Apr 22, 2011

Anyone know help?
Everytime i start wow and HB with Questing
it start in profile with the FIRST quest
then i have to stop and start HB again, then it go to the correct quest, where it should be....

fasteddie78 · Apr 22, 2011

Mixed mode still doesnt work for the last 3 releases at least. GB2/PVP does not work i have left logs in other threads but it does not seem to help. The toon will run the battleground and all is well. Once out of the battleground it will proceed herbing/mining but will not fight back and will stand on top of the node trying to mine/herb until it is killed. PLEASE fix this.

Nesox · Apr 22, 2011

fasteddie78 said:
Mixed mode still doesnt work for the last 3 releases at least. GB2/PVP does not work i have left logs in other threads but it does not seem to help. The toon will run the battleground and all is well. Once out of the battleground it will proceed herbing/mining but will not fight back and will stand on top of the node trying to mine/herb until it is killed. PLEASE fix this.

Mr3uk said:
This is not true, mixed mode still doesnt work for me and several others from what I can see. Tony said that it will be fixed in the next release so I just wondered when that might be. Ill attatch one more recent log to show that after a bg the bot doesnt continue to kill mobs anymore. Just runs around the waypoints and gets owned The strange thing is that the bot can obviously see that im taking damage as its using abilities like ice barrier, but just not fighting back -.-

I said i was working on it and it should be fine now, eg; Next release not this one

[Release] Honorbuddy 2.0.0.4492

New Member

Member

Member

New Member

Attachments

Member

Well-Known Member

Member

New Member

Member

Member

Member

Member

Member

Well-Known Member

New Member

New Member

Member

Attachments

Member

New Member

Well-Known Member