[Plugin] YAR - Yet Another Relogger

[godeity]

I installed new fresh DB.

DB works fine without using YAR BUT !
DB is going to stop(freezing) when I start DB with YAR.

1. I changed Adventurer 18A.
2. Newest Trinity
3. Updated all NetFrames.

I really need to use DB with YAR.

Please help.

Thank you.

Confirm that these versions are:
adventurer 18A
trinity 451
yar after 2.28

I was troubled by this, I am win10x64, just now I updated the two latest plug-ins, I have to solve the problem, and then try!

 

[jubisman]

Thanks for your work! If it helps, YAR message when disconnecting the fourth account is something about too much time with db not responding, as if db was iddle when it's not.

Sounds like helpful information, thanks!

I installed new fresh DB.

DB works fine without using YAR BUT !
DB is going to stop(freezing) when I start DB with YAR.

1. I changed Adventurer 18A.
2. Newest Trinity
3. Updated all NetFrames.

I really need to use DB with YAR.

Please help.

Thank you.

You need Trinity .45.1 as it's the only version that will work with YAR currently. Is that the one you have?

Hi Attached the log , please advise what shall I do ?

Till Check Force Enable Plugins? True (its not moving anymore until I manually select a profile)




N [3/11/2016 2:27:52 PM] Could not find a matching bot for Demonbuddy:4600
N [3/11/2016 2:29:56 PM] <firewiz> We are scheduled to start
N [3/11/2016 2:29:56 PM] <firewiz> Language set: English (US) : enUS
N [3/11/2016 2:29:56 PM] <firewiz> Region set: America : us.actual.battle.net
N [3/11/2016 2:30:09 PM] <firewiz> Diablo:10984: Found D3 Main Window (1640888)
N [3/11/2016 2:30:13 PM] <firewiz> Diablo:10984: Waiting for process to become ready
N [3/11/2016 2:30:15 PM] <firewiz> Diablo:10984: Process is ready
N [3/11/2016 2:30:15 PM] <firewiz> Demonbuddy start delay, waiting 10 seconds
V [3/11/2016 2:30:19 PM] Relogger Thread Starting!
N [3/11/2016 2:30:31 PM] <firewiz> We are scheduled to start
N [3/11/2016 2:30:31 PM] <firewiz> Language set: English (US) : enUS
N [3/11/2016 2:30:31 PM] <firewiz> Region set: Europe : eu.actual.battle.net
N [3/11/2016 2:30:42 PM] <firewiz> Diablo:13104: Found D3 Main Window (657052)
N [3/11/2016 2:30:46 PM] <firewiz> Diablo:13104: Waiting for process to become ready
N [3/11/2016 2:30:47 PM] <firewiz> Diablo:13104: Process is ready
N [3/11/2016 2:30:47 PM] <firewiz> Demonbuddy start delay, waiting 10 seconds
N [3/11/2016 2:30:57 PM] <firewiz> Installing latest plugin: C:\Users\VINCORCAS\Documents\Demonbuddy\Plugins\YAR\Plugin.cs
N [3/11/2016 2:30:57 PM] <firewiz> Installing latest bot: C:\Users\VINCORCAS\Documents\Demonbuddy\Bots\YARBot\YARBot.cs
N [3/11/2016 2:30:57 PM] <firewiz> Demonbuddy:3728: Waiting for process to become ready
N [3/11/2016 2:30:58 PM] <firewiz> Found Demonbuddy: MainWindow (1312886)
N [3/11/2016 2:30:58 PM] <firewiz> Demonbuddy:3728: Process is ready
N [3/11/2016 2:30:58 PM] <firewiz> Demonbuddy:3728: Waiting for demonbuddy to log into Diablo
N [3/11/2016 2:31:23 PM] <firewiz> Sending DifficultyLevel: Disabled
N [3/11/2016 2:31:23 PM] <firewiz> Current profile: "" Runs:0 Time:0 mintues ()
N [3/11/2016 2:31:23 PM] <firewiz> Sending Current Profile to Load
N [3/11/2016 2:31:23 PM] <firewiz> Sending DifficultyLevel: Torment10
N [3/11/2016 2:31:23 PM] <firewiz> Demonbuddy:3728: Initialized! We are ready to go
N [3/11/2016 2:31:25 PM] <firewiz> Check Force Enable Plugins? True

Says there you don't have any profile loaded. Did you select the right profile in the wizard (that setup window)?

Is leaving the game after restarting DB part of new YAR changes? Please make it optional or point out where I can edit it. It doesn't happen when re-attaching DB without YAR.

It isn't, DB started doing this for whatever reason. I can ask around if it bother you too much as I personally don't care about it one way or the other.

Please kindly update yar, thank you

Uh, why?

 

[romka]

Hello, without yar all ok but if run yar, bot started and after some seconds restart

DB 457
Trinity 2.14.45.1
Adventurer .18a

 

[destroyer57]

You'll need to describe more than "YAR does not work ok" - How?

Edit - Saw your previous post, I have none of these issues and run 10 bots from one YAR and difficulty setting is fine and they all start.

Again - do you have the updated version Jubis posted?

how exactly does one download this?

is there a .zip or .rar?

thank you!!

Hello, without yar all ok but if run yar, bot started and after some seconds restart

DB 457
Trinity 2.14.45.1
Adventurer .18a

I get that problem too sometimes...

jubisman, about the problem with simplefollow and autofollow closing fourth account, I have seen that when I run all 4 accounts with YAR, but doing separately normal rifts, for example, the problem does not happen.

 

[MrPeeg]

I get that problem too sometimes...

jubisman, about the problem with simplefollow and autofollow closing fourth account, I have seen that when I run all 4 accounts with YAR, but doing separately normal rifts, for example, the problem does not happen.

The 4th account... is it the barb? Because I have been getting this problem for awhile now when I run 4 mans. All 4 bots load up fine, but the barb demonbuddy keeps getting null exception errors until YAR closes it. This happens for SimpleFollow and Autofollow, my fix for this is to untick the barb's YAR Comms plugin right after YAR loads it. Take note that I am using the setup here https://www.thebuddyforum.com/demonbuddy-forum/demonbuddy-guides/236940-guide-setup-4-grift-80-realistic-200-exp-hour-post2137050.html#post2137050, which has some modifications to the barb ancient spear logic.

 

[destroyer57]

Yes, it is. Thx for your answer, I'll try it.

 

[lawlumad88]

Hello, without yar all ok but if run yar, bot started and after some seconds restart

DB 457
Trinity 2.14.45.1
Adventurer .18a

Im also having the same problem with Adventure plugin enable/not enable

 

[steelseries]

I have a new mistake today. This happens when I start YetAnotherRelogger. Had this problem twice before and made YAR new with SVN. But today I have no idea

 

[Schizoid]

Is leaving the game after restarting DB part of new YAR changes? Please make it optional or point out where I can edit it. It doesn't happen when re-attaching DB without YAR.

It isn't, DB started doing this for whatever reason. I can ask around if it bother you too much as I personally don't care about it one way or the other.

Yes please, it wastes a lot of my time to wait and manually cancel the log out or to start DB's manually
It is definiately a new YAR issue, I just digged out old one (from april 12 2015) to test and it doesn't do that, but it can't detect when DB is attached so I can't use for multi botting.

 

[steelseries]

yar doesn´t work anymore for me

 

[Tindal]

Im also having the same problem with Adventure plugin enable/not enable

1. After load folowers-DB - click "Stop".
2. Click "Stop" in leader-DB.
3. In leader-DB on "Plugin" uncheck "Adventurer" and now check "Adventurer".
4. Reselect in leader-DB your profile.
5. Click "Start" in folowers-DB.
6. Click "Start" in leader-DB.
*this is bug in Adventurer

 

[spardadt]

Noob question here. Can YAR start up D3 and DB automatically if either of them crash in the middle of a session? And how do you set that up? I've been playing around this plugin and still confused.....

 

[d133294]

Noob question here. Can YAR start up D3 and DB automatically if either of them crash in the middle of a session? And how do you set that up? I've been playing around this plugin and still confused.....

Its cool on your question. So launch yar and click the new button in the lower right. There add your character and DB info. If you use ISBOXER, then add that info too on step 2 i think. YAR, will add a plugin that tracks the crashes and id of your diablo 3 and DB sessions, so yes if it crashes, it will relaunch the game and DB. I know this is generic, but just post here if you have any questions and i, and the staff, will respond as soon as we can

 

[spardadt]

Its cool on your question. So launch yar and click the new button in the lower right. There add your character and DB info. If you use ISBOXER, then add that info too on step 2 i think. YAR, will add a plugin that tracks the crashes and id of your diablo 3 and DB sessions, so yes if it crashes, it will relaunch the game and DB. I know this is generic, but just post here if you have any questions and i, and the staff, will respond as soon as we can

Thank you for being very helpful. So after I start YAR do I just leave it on and it's all good? And also I chose the nep profile and it seems like there's only torment 6 available. Is that correct?

 

[spardadt]

I'm having problems with this. First It couldn't log in cuz I have authenticator. When I manually put in the authenticator code in, DB just got bunch of error msg, seen in the attached log file.View attachment 9468 2016-03-14 18.24.txt. Anyone know what's going on?

 

[69hades]

Is there someway I can get hold of the previous version YAR, because the latest version doesn't work with my setup. I never saved the last version. The setup runs fine without YAR, but doesn't compline when using the latest ver of YAR.

My setup: IK & Reak
Demonbuddy: v1.1.3010.460
Adventure: 1.3.4.18
Trinty:v2.14.31

 

[Alibud66]

For me everything is working fine for solo bounties and rifting, as of today. Latest builds of Buddy, Trinity and YAR + Adventurer and QuestTools. For GR it takes in account Plugins for setting GR level.

 

[Booger]

Can someone inform me on what a couple of the settings are:

Step 3 --> Schedule: Randomization min and max. Are the min and max for how much they deviate from the times on and off? Or will it take breaks between runs?

Step 4 --> Profile Settings: Runs/Minutes/Goldtimer. I understand doing the profile X number of runs, but does minutes or gold supersede that, do I need anything in those as well? How much does the randomization effect it?

Is there a way for it to take, say, a 5 min break after a profile is done before it goes to the next one or repeats?

 

[Booger]

Also, a separate question, how does YAR interact with a Tripwire event? Are you automatically screwed by the relog?

 

[d133294]

Thank you for being very helpful. So after I start YAR do I just leave it on and it's all good? And also I chose the nep profile and it seems like there's only torment 6 available. Is that correct?

thats wierd, you must be using an old YAR then. After you launch YAR, click edit on your main bot and go to step 4/5,profile selection, and in the difficulty is there anything past T6?; assuming you have a profile loaded. Also, make sure your DB setting on your main is set to what ever level you want it to start with; but thats for non YAR use.