Trinity 2.13.81

[xzjv]

New version with some bug fixes.

2.13.81 (Latest Version)

• Disconnects
  • Bot should no longer get disconnected because of too many actions being performed too quickly.
  • Added APS setting under Advanced, defaults to ON / 10 APS.
• Doors should now be opened while using adventurer in zerg mode.
• Changes to the TPS slider should now be applied properly on save.

2.13.78 (Version currently included with DB Beta)

• General
  • Significant Performance Improvements
• Monk
  • Added option to apply Dashing Strike delay to OOC logic as well as combat (jubisman)
  • Added Dashing Strike OOC Delay Setting (jubisman)
  • Fixed Healer Monk thinking it was blocked by mobs all the time (jubisman)
• In Progress/Future
  • [3x] Redesigned CacheUI and RadarUI into a new window called Visualizer with additional features.
  • [3x] Behaviors can now be added to routines and configured.

 

[bombastic]

Thanks

 

[ekolan]

Any chance to see some crusader improvement soon?
DL'ing the new beta now

 

[Peg_EGG]

 

[lollos]

i have a big problem after the last autoupdat... frame rate is going down is inusable, it's only mine problem?

 

[Alucard93]

I'm using DB 1.1.2779.437, Trinity 2.13.78 and Adventurer 1.3.3.144 and DB is still using up 8-18% of the CPU, so there seems to still be a performance issue. Thanks for the quick update though

 

[ekolan]

Nesox just pushed a new DB Beta version (.575) with new Trinity 2.13.78 included. It's also attached below.

https://www.thebuddyforum.com/demonbuddy-forum/210799-beta-demonbuddy-beta-builds.html

 

[Alucard93]

https://www.thebuddyforum.com/demonbuddy-forum/210799-beta-demonbuddy-beta-builds.html

Does it fix the performance issues?

Edit: It has trouble opening (breaking?) doors after the update as well. (still haven't updated to beta DB but currently running the latest non-beta version [v1.1.2779.437]), it won't open doors, it won't break breakable doors and it won't break destructibles that are in the way. Is this because I need to update to DB beta or is someone using DB beta also experiencing this? (running Adventurer - Bounties, but I highly doubt the profile would cause it rather than one of the plugins)

 

[xzjv]

I'm using DB 1.1.2779.437, Trinity 2.13.78 and Adventurer 1.3.3.144 and DB is still using up 8-18% of the CPU, so there seems to still be a performance issue. Thanks for the quick update though

Your TPS probably increased with this version which would cause it to use more CPU.

The TPS limit slider under Advanced should let you throttle it back.

Try setting it to 6 (which for me runs at 10 TPS actual) @ 2-5 % CPU

setting of 30 (20-35 actual) for me runs @ 8-12% CPU.

Memory footprint did increase by a decent amount recently. ~185->270 MB, doubt that's an issue though unless people are running on VMs.

 

[dbfriend]

hi @xzjv,

thanks for the updated.

does this solve the 'Second Stash' issue?

 

[Alucard93]

Your TPS probably increased with this version which would cause it to use more CPU.

The TPS limit slider under Advanced should let you throttle it back.

Try setting it to 6 (which for me runs at 10 TPS actual) @ 2-5 % CPU

setting of 30 (20-35 actual) for me runs @ 8-12% CPU.

Memory footprint did increase by a decent amount recently. ~185->270 MB, doubt that's an issue though unless people are running on VMs.

Ah, thanks a lot, I'll try that out asap! Do you have any idea what could cause the bot to not detect doors (both breakable and "openable") and destroyable blocking objects?

 

[Peg_EGG]

Your TPS probably increased with this version which would cause it to use more CPU.

The TPS limit slider under Advanced should let you throttle it back.

Try setting it to 6 (which for me runs at 10 TPS actual) @ 2-5 % CPU

setting of 30 (20-35 actual) for me runs @ 8-12% CPU.

Memory footprint did increase by a decent amount recently. ~185->270 MB, doubt that's an issue though unless people are running on VMs.

Great work there now bot clear the area before recall more efficently, also, love the ooc dashing strike delay. Although my FPS drops even more than last version (2.13.75), normally its between 45-70 while i play, and its 30-40 while i bot with 2.13.62; but latest version drops fps like i m watching a 1990s flash cartoon... i had between 10-20 while using 2.13.75, but now i m only having 5-8 with this update.... not sure if this is affecting the grind efficency though.


Edit: issue resolved thanks to @jameslr
https://www.thebuddyforum.com/demonbuddy-forum/plugins/trinity/231670-trinity-2-13-78-a-3.html#post2096953

 

[Alucard93]

Set the TPS to 2 and it never goes lower than 8 - 9.9 still lol, I used to have it running at around 7.5-8 which was good performance-wise for me, is it possible to set it that low again somehow?

Edit: And the CPU went all the way up to 24% for a while as well D:

 

[ekolan]

Set the TPS to 2 and it never goes lower than 8 - 9.9 still lol, I used to have it running at around 7.5-8 which was good performance-wise for me, is it possible to set it that low again somehow?

Edit: And the CPU went all the way up to 24% for a while as well D:

Depending on the PC it also matters what els you have running. I'm using the newest DB beta and my PC is a few years old and i have about 20-30 FPS with the TPS limit slider set to max (30) CPU usage from botting is 15% WITH FB, Demonbuddy forum and a TV stream going on.

One thing i know lags the game, and can help out ALOT is completely removing area dam. (unless you depend on it)
It's been tested solo and in 4man GR 70-80, it makes the game run a hell of alot smoother

 

[JunksDK]

Am i the only one getting - [Adventurer] Patiently waiting for the Navigation Server - alot the past days? just after starting af rift!

 

[xzjv]

Set the TPS to 2 and it never goes lower than 8 - 9.9 still lol, I used to have it running at around 7.5-8 which was good performance-wise for me, is it possible to set it that low again somehow?

Edit: And the CPU went all the way up to 24% for a while as well D:

Yeah i don't know why DB seems to add 5-10% on top of whatever you set the slider to, its a bit weird.

Also, i found a bug where changing the slider in settings doesn't apply the new setting until DB is restarted, so be aware of that.

 

[Mario27]

Yeah i don't know why DB seems to add 5-10% on top of whatever you set the slider to, its a bit weird.

Also, i found a bug where changing the slider in settings doesn't apply the new setting until DB is restarted, so be aware of that.

you never looked at my log files from the townportal spam back to town im unable to use diablo 3 bot even if i uninstal it reinstal could you please check that

 

[Mario27]

here a new log again i hop you watch it this time no matter what i instal evry diablo 3 bot version it keeps doing this shit im unable to lvl up my class with quest botting in db Townportal spam keeps happening i hope you check it this time

 

[Alucard93]

Yeah i don't know why DB seems to add 5-10% on top of whatever you set the slider to, its a bit weird.

Also, i found a bug where changing the slider in settings doesn't apply the new setting until DB is restarted, so be aware of that.

Ah, I see! I'll try it out later then

 

[Beowulfe]

here a new log again i hop you watch it this time no matter what i instal evry diablo 3 bot version it keeps doing this shit im unable to lvl up my class with quest botting in db Townportal spam keeps happening i hope you check it this time

It's trying to constantly do town runs because your bags are too full.

Either reduce the "minimum free inventory space" setting or empty your inventory.


EDIT: Side note, latest version of Trinity is running much better for me than .75, thanks for the hard work!